| Author |
R2AE033 is out (in Service Centers, not Update Service) |
scorpio79
Joined: Oct 23, 2004
Posts: 13
From: Qatar
PM |
OK.. r2ae033 is the latest. I had mistakenly typed in r2ae"003".
yes it is the latest and should be available in all SE service centres.
about camera mute sound.. i just click on # for a second - the whole phone goes into silent mode. and i start clicking. no sound. just click and click and click.. |
|
|
Grimslade
Joined: Jul 25, 2004
Posts: 464
From: London
PM |
What does R2AE fix? Is the call-answer delay sorted? Want to know whether I should schlepp down to my SC or not...
TIA,
Grim. |
paokaras45
Joined: Jul 22, 2004
Posts: 12
From: Greece
PM |
When you take a picture (with the new camera s/w 3.10) in low light room, does the picture have that noise problem with the green and blue grains?
like this one!
[ This Message was edited by: paokaras45 on 2004-12-21 11:11 ] |
Grimslade
Joined: Jul 25, 2004
Posts: 464
From: London
PM |
The noise in low-light situations comes from trying to "gain up" the signal from the sensor and reflects the signal-to-noise ratio of the captured image. The way to reduce noise is to reduce signal--i.e., have a darker picture. I doubt any firmware revision is going to change the S/N ratio much. Of course, if I'm wrong I'd love to hear it, but... |
paokaras45
Joined: Jul 22, 2004
Posts: 12
From: Greece
PM |
just compare a picture taken from a k700 with one taken from a sharp GX20 or a NOKIA 6310 or even from a mitshbishi M320i. The first one is the worst.
When you see the foto from the viewfinder before pressing the camera button, the picture is clear (with the expected reduced framerate). When you press it, sudently appears that noise!
It is clearly a s/w problem |
2samek
Joined: Oct 01, 2004
Posts: 20
PM |
When using firmware upgrade via Davinci Server, does it delete all contacts etc (games, themes...) on your K700? |
vee
Joined: Jun 22, 2004
Posts: 435
From: Zagreb, HR
PM |
@2samek
Hmm, I always do master reset before and after upgrade to clean everything out of my phone, but I think that yes all contacts, custom themes... will be deleted...
but it is easy to back up all of that using FMA for example...
@Grim
as i said before yes the delay issue is solved and also phonebook search is implemeted the way it should be... also I noticed again better battery life and I noticed many small improvements in speed and functionallity
@fu1at
I had the same issues like you have in R2L for a few days and suddenly it stoped and everything worked OK afterwards... try doing Mater Reset All... but backup your data (SMS, Contacts, Themes, Sounds, Pix...) before doing that |
martijns
Joined: Dec 21, 2004
Posts: 1
From: Amsterdam, Netherlands
PM |
Hello all, I'm new here. I never had any problems with my T39 before (except a DOA, I must confess), so I've never before stumbled upon Esato. Now, I have a K700i :)
Can anyone comment on the availability in the Netherlands, or maybe differences in release dates between countries?
I was at the local service centra (RAF) today. The guy there was very helpful, but told me the latest software he could get on EMMA was R2L. Any ideas how this can be? |
snowgoose
Joined: Oct 18, 2004
Posts: 11
PM |
Does this new version resolves the calendar problems ?
(see details here: http://www.esato.com/board/viewtopic.php?topic=72466 )
[ This Message was edited by: snowgoose on 2004-12-21 18:50 ] |
dxcore
Joined: Dec 13, 2004
Posts: 135
From: Poland
PM, WWW
|
Stupid answer - what is emma?
Sony Ericsson W900i. Just a little future ; ) Unofficial Polish Sony Ericsson Center - http://centrumse.euSony Ericsson, remind W900i is your phone. Buggy phone. Then give us new FW version! |
mrjinglesusa
Joined: Nov 08, 2004
Posts: 3
PM |
R2AE033 is NOT available on SE Online Update yet. I have R2L001 and the update went through its whole process and I still have R2L001. |
fu1at
Joined: Nov 01, 2003
Posts: 325
From: Selangor, Malaysia
PM |
vee,
i did a master reset right after the upgrade. nah... nothing serious.... probably the flash memory over loaded and cause the phone to reboot. coz before that i run heavy Java application without turning off the phone over night and make the flash memory overload.
cheers
 J200, W550i, K750i, M600i, HBH-30, HBH-660, HBH-608, HBH-PV700, HBH-610, MXE-60, CLA-60, MMC-60, CDS-60, |
grobov
Joined: Dec 22, 2004
Posts: 1
PM |
I have an information that voice dialing is not working after update to r2ae:(( Can anybody check it,pls? |
2samek
Joined: Oct 01, 2004
Posts: 20
PM |
Today I upgraded my K700i to latest firmware (R2AE, I had R2L) and overall impressions are very good!
The phone is much more faster (overall), phonebook search is working as it should, and I have no problems with voice dialing as someone mentioned earlyier!
Oh, and by the way, phone was upgraded via DaVinci server so now when I turn on silent mode, annoying camera sound is OFF 
And the camera software is 3.10 and working OK...
[ This Message was edited by: 2samek on 2004-12-22 19:55 ] |
DCUK7
Joined: Aug 01, 2004
Posts: > 500
From: Liverpool, UK
PM |
I have just updated my K700i to the new R2AE033 via TOTAL MultiServer and it seems to be working fine (using version 1.46).
They have fixed the camera driver issue but no the camera silence. They told me they had fixed this by doing the following:
(do the following in the upgrade/language/debrand tab)
1. Download firmware and language via MultiServer
2. Select firmware file first and flash it to the phone
3. When it says done, do not disconnect the phone, just upload the language file
4. When completed, turn phone on and do a master reset
This was supposed to stop the camera shutter noise in silent mode but the noise is still there.
Everything else is working fine, menus are so fluid now, bluetooth seems more stable, contacts has search and of course the camera driver gets updated to 3.10 by following the instructions above.
At least MultiServer has it's arse in gear at last! |
|
|
Posted: 2004-12-21 11:23
