| Author |
Super camera driver for k750/w800/w810 |
krzychu
Joined: Jul 20, 2007
Posts: 23
PM |
@dragonball75
when you have night mode on all zoom values above 3.0 = 2s |
|
|
leetiran
Joined: Aug 15, 2007
Posts: 134
From: China
PM |
@all
I modified Raider camdriver_66 to make ISO always be 100 when using manual shutter speed.
http://www.mediafire.com/?3et2dyjblny |
dragonball75
Joined: Jul 02, 2006
Posts: 32
PM |
Can you post some shots ?  |
cronos555
Joined: May 01, 2007
Posts: 110
PM |
dude that's an awesome mod! i played around with some night shots and it works really well. however if i pick a high shutter speed (darker image) and then try to brighten it up using exposure (EV), then the resulting image has ISO greater than 100. actually greater than 80 for me since i have a w810. of course i was just fooling around ... the correct way to brighten an image would be to use a slower shutter speed, especially at night. |
dragonball75
Joined: Jul 02, 2006
Posts: 32
PM |
dude that's an awesome mod! i played around with some night shots and it works really well. however if i pick a high shutter speed (darker image) and then try to brighten it up using exposure (EV), then the resulting image has ISO greater than 100. actually greater than 80 for me since i have a w810. of course i was just fooling around ... the correct way to brighten an image would be to use a slower shutter speed, especially at night.
Can you post some shots taked with the modded 6.6 ? It's specific for a particoular CID or is totally compatible with both 36/49 ? Thanks again  |
Sombra
Joined: Mar 28, 2007
Posts: 165
From: Brazil
PM |
Some pics taked with a K750i CID49 (R1BC002) and Strong's SuperFunction 5.6 camdriver:
EM On - Noise test in darkest room (lights are standby eletronic equipments)
EM On - Spot Off
EM On - Spot On
No doubt, Strong's camdriver is very good.
Sorry for my poor english.
_________________
K750i CID49 (R1BC002) - Testing Strong's SuperFunction 5.6...
[ This Message was edited by: Sombra on 2007-11-02 13:06 ] |
leetiran
Joined: Aug 15, 2007
Posts: 134
From: China
PM |
@dragonball75
The difference among the 36/49 and w810 of Raider6.6 is just on sharpness. And you can change it with the configtool. I just make ISO=100 when using manual shutter speed, the other are all same. And there are a lot of shots taken with 6.6 in this thread.
[ This Message was edited by: leetiran on 2007-11-02 04:07 ] |
Raiderski
Joined: Jul 03, 2006
Posts: > 500
From: Poland, Hell, Mountains
PM, WWW
|
leetiran
you found something interesting. at the moment i don't know how should i refer to this. i need more free time to be able to look deeper into this
all
on all PMs i will answer as soon as possible
cheers
|
leetiran
Joined: Aug 15, 2007
Posts: 134
From: China
PM |
On 2007-11-02 12:10:15, Raiderski wrote:
leetiran
you found something interesting. at the moment i don't know how should i refer to this. i need more free time to be able to look deeper into this
using the scene #CMD(51,04), the iso will always be 100. I found this from 8.54 |
Raiderski
Joined: Jul 03, 2006
Posts: > 500
From: Poland, Hell, Mountains
PM, WWW
|
yes, but there is something else. i'll write about this later
|
lpachuong
Joined: Jun 06, 2007
Posts: > 500
From: Vietnam
PM |
On 2007-11-02 12:22:31, leetiran wrote:
On 2007-11-02 12:10:15, Raiderski wrote:
leetiran
you found something interesting. at the moment i don't know how should i refer to this. i need more free time to be able to look deeper into this
using the scene #CMD(51,04), the iso will always be 100. I found this from 8.54
Yes, it is true. If we set up this one in prop_b, change all value of 05 back to 04 we will always get ISO 80(100). 00 for ISO 1600. However, Shutterspeed will not work correctly for some cases. For the Prop_11, we need to re-arrange the value for 00 to 0c (not essential). I'm checking ISO1600 with different value of sharpness but so far IS0 1600 is similar to ISO 800 on k750icid49. I hate noise so much 
Btw, I will post a 9.9 as the last version has some problems I found out. I really sorry about that. Will see you tomorrow. Have a nice day.
Yours regards.
[addsig] |
whatsucka
Joined: Feb 17, 2007
Posts: > 500
PM, WWW
|
i was using the A4A 9.3 n realized the shutter time was super long when takin pics in pitch black n with LED on
pitch black van trunk, LED, ENM on, shutter time was around 6-7 seconds
it was impossible for me to hold my hand still for 7 seconds...
some light, LED, ENM on. shutter time was around 2 3 seconds. no noise in picture...awesome!!
can u set the shutter time less for the situation in the 1st pic??
|
strong
Joined: May 18, 2007
Posts: > 500
From: Greece
PM |
In SuperFunction v5.6 there is a profile shot always ISO 100 and the code is simply : #SET(05,01)
Samsung GT-i8910 Omnia HD
K850 R1FA035 modded camdriver
modded acoustic drivers
www.camdrivers.wz. |
dragonball75
Joined: Jul 02, 2006
Posts: 32
PM |
@ leetiran : I just test the 6.6 mod you made on Raidersky driver , really improved the night shots !!! I finally I've found my driver . Thanks |
lpachuong
Joined: Jun 06, 2007
Posts: > 500
From: Vietnam
PM |
On 2007-11-02 16:32:40, strong wrote:
In SuperFunction v5.6 there is a profile shot always ISO 100 and the code is simply : #SET(05,01)
Strong, I will try this one. Let's try to find out a way to break ISO limit on w800i/k750i. Actually I tried with this SET(05,01) but it is not as stable as the change in prop_b. Test it and you will see.
[addsig] |
|
|
Posted: 2007-10-31 22:59
