| Author |
Super camera driver for k750/w800/w810 |
dukempg
Joined: Sep 11, 2007
Posts: 70
PM |
On 2007-10-17 18:26:24, cronos555 wrote:
yeah i have a copy in my pocket too. i've used it often enough that i'm getting pretty good at making the setting first and then consulting the guide to see if i've made the correct setting. and of course if you use Raider's driver, you can just program the various settings as scenes, which is what i've done.
Beautiful shots! I was using Ridersky previously but I have changed to A4A-9.1 (modded with sharpness 0) due to the better colors (to my eyes) and improved compression (can reach up to 100% in most shots). But I miss the configuration tool, it's really useful. Maybe I'll try to hack the profiles in the code, I've read somewhere a guide on how to do it.
BTW, you may want to check my noise removal guide:
http://www.esato.com/board/viewtopic.php?topic=156756
It's very useful for night, noisy pics. |
|
|
terminator17
Joined: Jul 04, 2007
Posts: 155
PM, WWW
|
On 2007-10-17 18:26:24, cronos555 wrote:
On 2007-10-16 17:55:56, dukempg wrote:
@cronos555
Very interesting guide! I was feeling a little lazy when I first saw your post and initially found it a little complicated however after reading again I see that's very simple actually. I am even planning on creating a "referece card" with the parameters we use so we can carry on the pocket 
yeah i have a copy in my pocket too. i've used it often enough that i'm getting pretty good at making the setting first and then consulting the guide to see if i've made the correct setting. and of course if you use Raider's driver, you can just program the various settings as scenes, which is what i've done.
all shots below with Raider's 6.6 driver. your driver is super stable! all shots with manual settings.
in below shot you can see the same hotel tower as 1st pic, only at night 
man,is this really from mobile phone...?just amazing...if its not edited[:D]
|
Drz Daddy
Joined: Apr 25, 2007
Posts: 46
From: Santiago, D.R.
PM, WWW
|
one question, i can preform a w810 cam driver to put in my w200??
De vuelta al coro!!! |
xxdjrerunxx
Joined: Sep 12, 2007
Posts: 33
PM |
On 2007-10-18 15:36:19, dukempg wrote:
On 2007-10-17 23:43:36, xxdjrerunxx wrote:
I would like to know which driver is the best for the mxe-60. Would the A4A 9.1 driver work ok with it ? I'm guessing to use it at night i'll have to move over to normal mode so the flash will be in sync. Soon to get my mxe 60 waiting for paypal to confirm some crap. I got a w810i
A4A 9.1 in Normal mode work fine. Ridersky 6.6 also works fine.
Thanks for your reply also would the Ridersky 6.6 in enhanced mode work or would it be out of sync like the A4A 9.1 driver ?
Modded W810i White - Camdriver: lpachuong A4A-9.1 - Sound Driver: THV v7 - Unlock - Debranded |
cronos555
Joined: May 01, 2007
Posts: 110
PM |
@dukempg
i have d/led your guide. it's awesome. haven' tried it out yet. maybe i'll try it out on the night shots i took
@terminator17
lol. they're the real deal. no modifications. i posted that night shot to Esato's photo section, check it out. also i have posted all pics i took that day, you can check out full size shots:
http://picasaweb.google.com/c[....]6/20071016?authkey=Gz6rO50OvT0 |
BOSSHOGG
Joined: Dec 19, 2002
Posts: > 500
PM |
These are with raiders last two drivers...
|
whatsucka
Joined: Feb 17, 2007
Posts: > 500
PM, WWW
|
On 2007-10-17 19:22:58, gooniegoogoo wrote:
I also think sarmad's driver (i'm using 5.7) suits my taste. Easy to use, manual focus for even sharper pics, EM mode, and good compatibility with MXE-60. I be using w800 R1BC002.
is that the white FC RX-7 from initial D?? omg i love dat car!!
[ This Message was edited by: whatsucka on 2007-10-19 06:20 ] |
trushv
Joined: Oct 17, 2007
Posts: 1
PM |
Hi,
Does this(camera driver v8.54) support the CID36 R1BC002 of w800?
thanks |
leetiran
Joined: Aug 15, 2007
Posts: 134
From: China
PM |
On 2007-10-19 08:07:44, trushv wrote:
Hi,
Does this(camera driver v8.54) support the CID36 R1BC002 of w800?
thanks
Yes, it does. |
dukempg
Joined: Sep 11, 2007
Posts: 70
PM |
Thanks for your reply also would the Ridersky 6.6 in enhanced mode work or would it be out of sync like the A4A 9.1 driver ?
If I recall correctly it doesn't, but you shouldn't use it with enhanced mode. Enhanced Mode always use a higher exposure time, what doesn't make sense with flash when you want a very short exposure (i.e. when the flahs comes out only). But you can enable the filtering used in EM using ridersky config tool.
@cronos555
Try it, you won't regret Make sure you see the changes with photos in real size (i.e. not resizing to fit screen), otherwise you can miss it.
[ This Message was edited by: dukempg on 2007-10-19 12:40 ] |
dukempg
Joined: Sep 11, 2007
Posts: 70
PM |
@lpachuong
Found a bug with manual shutter speed on A4A-9.1, EV 1.0/Zoom 1.1 will give Shutter speed 1/400 instead of 1/5000 as it would be expected. Tested on CID36 W800. However I suspect only the EXIF info is being recorded mistaken, since the shot with 1/5000 with Ridersky doesn't look bmore brigth than 1/400 with A4A (and it should be).
Edit: Actually Ridersky is doing 1/5000 ISO 800 while A4A is doing 1/400 ISO 100, using the same settings. Notice that I didn't touch iso Settings whe using A4A. I'll try that and report back.
Edit2: Tried playing with A4A ISO Settings (EV -0.3) but it seems not to make any difference.
[ This Message was edited by: on 2007-10-19 21:38 ] |
xxdjrerunxx
Joined: Sep 12, 2007
Posts: 33
PM |
On 2007-10-19 13:34:26, dukempg wrote:
Thanks for your reply also would the Ridersky 6.6 in enhanced mode work or would it be out of sync like the A4A 9.1 driver ?
If I recall correctly it doesn't, but you shouldn't use it with enhanced mode. Enhanced Mode always use a higher exposure time, what doesn't make sense with flash when you want a very short exposure (i.e. when the flahs comes out only). But you can enable the filtering used in EM using ridersky config tool.
@cronos555
Try it, you won't regret Make sure you see the changes with photos in real size (i.e. not resizing to fit screen), otherwise you can miss it.
[ This Message was edited by: dukempg on 2007-10-19 12:40 ]
Alright thanks for your help it means a lot.
Modded W810i White - Camdriver: lpachuong A4A-9.1 - Sound Driver: THV v7 - Unlock - Debranded |
lpachuong
Joined: Jun 06, 2007
Posts: > 500
From: Vietnam
PM |
Good Morning everyone and have a nice weekend.
It has been a long time since I last visited here. I'm glad that this topic is still very hot with some new members. I have been quite busy with my study and haven't spend much time for extra activities (So sorry for not replying you). Next week is study week so I will have one easier week So far, I'm still playing with the firmware for the patches of ISO-Exposure-Sharpness but there are still bugs. When I finish I will post the patches here.
However, from the last version, there are some limits you found out and I have created this one:
A4A 9.2 - All in one
http://www.mediafire.com/?4yzbimzosd9
This is version for all of the phone. Please try it first and tell me about noise/sharpness/exposure/colour. Then I will create seperate drivers for different compression.
Hope you all enjoy it.
Your sincerely,
Chuong (My teachers call me Ju )
_________________
To be or not to be !!!
Please save our world. Save our world to save our lives and our generation. 
There is no place as good as your house with your family. Home sweet home.
[ This Message was edited by: lpachuong on 2007-10-20 12:24 ] |
paparazy
Joined: Dec 04, 2006
Posts: 239
PM |
Shot day quality normal (size jpg 401kb) k750 cid49 red Raider camdriver v6.6 (no work enhanced night cid49)
Shot day quality normal (size jpg 270kb) k750 cid49 red PaParazy camdriver v1.90 update 7
Shot day quality normal (size jpg 270kb) k750 cid49 red EV 1.0 PaParazy camdriver v1.90 update 7
friends post photos! include mod. cel
Topic forum PaParazy for Download: http://www.esato.com/board/viewtopic.php?topic=147234
Topic forum Chengrong: http://www.esato.com/board/viewtopic.php?topic=135737 |
dukempg
Joined: Sep 11, 2007
Posts: 70
PM |
D So far, I'm still playing with the firmware for the patches of ISO-Exposure-Sharpness but there are still bugs. When I finish I will post the patches here.
However, from the last version, there are some limits you found out and I have created this one:
A4A 9.2 - All in one
@lpachuong
Thanks for the new release!
I did a test with my CID36 W800 regarding the exposure bug above and unfortunatelly it seems to be still there.
EV 1.0 - Zoom 1.1 - Bright scene: Resulting exposure 1/1250 ISO 100
EV 1.0 - Zoom 1.1 - low light scene: Resulting exposure 1/500 ISO 100
EV 1.0 - Zoom 1.2 - low light scene: Resulting exposure 1/400 ISO 100
EV 1.0 - Zoom 1.3 - low light scene: Resulting exposure 1/320 ISO 100
I believe it should always give exposure 1/5000 at zoom 1.1, and 1/2500 at zoom 1.2 regardless of the subject, correct?
|
|
|
Posted: 2007-10-18 15:45
