| Author |
fMA f[??] Mobile Agent, software for sms and phone monitoring |
bufflig
Joined: Jul 08, 2003
Posts: 9
PM |
@CqFma
Hi,
Nope, that's not anything I've ever encountered. Try removing the registry key "HKEY_CURRENT_USER\Software\floAt\MobileAgent", which holds GUI preferences, using regedit. See if that removes the problem. You need to remove it while FMA is completely closed (not in taskbar either).
Cheers,
/bufflig |
|
|
CqFma
Joined: Aug 04, 2003
Posts: 18
From: Silicon Valley, California
PM |
@bufflig
After removing the registry key, the problem went away. Possibly some bad entry got into the registry...
A potential problem with Sim Update. When I add a new entry to the right side list of the Sim Memory, that entry has the update flag * in the first column; good. However if I click any other entry line, the flag goes away and I do not see any way to set the flag again so that I can update the sim memory for this line. So, after entering multiple lines, if I accidentally click, all are reset, and the only way appears to reenter all the new lines before updating the sim. Is this what is expected in the current version? Will it not be a good idea to have a 'Set changed flag' button?
When do you think you would have a new build and release? Is there a beta version you would like anybody to test before you release this? I have requested signup as a developer.
_________________
Cordially, CqFma
[ This Message was edited by: CqFma on 2003-08-12 02:18 ] |
noer
Joined: Jul 31, 2003
Posts: 2
From: Jakarta - Indonesia
PM, WWW
|
fMA -- Synchronization Error:
Guys, last time I have successfully installed and run fMA perfectly, but now every time I try to synchronized the Contact Database I experiencing this error message (debug mode):
16:09:43:224 [RX] OK
16:09:50:305 Start Sync Phonebook....
16:09:50:345 [TX] AT*EOBEX
16:09:50:405 [RX] NO CARRIER
16:10:05:436 Disconnecting...
16:10:05:446 Disconnecting...
Anyone can help me? What's wrong with my fMA, I already try to delete the information on the registry (via REGEDIT), an restart the application but have no luck ...
TIA
==========
After writing this message, I'm switching off my T68i and start it up again, and amazingly the problem have solved, but now I'm on the same stage as Tep has (same error msg)
[ This Message was edited by: noer on 2003-08-13 11:32 ] |
M-Jay
Joined: Aug 14, 2003
Posts: 108
From: The Netherlands
PM |
Hello,
Is there a solution to this problem:
Quote:
|
I noticed that T610 gives the same +CMS: EXEPTION (303) ERROR message because of the faulty OK. Same with the Synchronization.
(My T610 is R1A)
Another issue for me is that I have entered about 50 contacts with some information in the COMPANY field - and the company title is not one word, but more - space delimited. Once sync is finished I can see EMAIL and ORGANIZATION fields messed up (in the computer).
Otherwise the program is GREAT! |
|
I use a T610 with firmware: R1L013, with IR connection.
Greetz,
M-jay |
Sander-
Joined: Aug 04, 2003
Posts: 39
From: Nederland
PM |
Really a great piece of software, does everything i want it to do. But i only have one question remaining... does someone have a Good working winamp script because i just cant find them and those i can find aren't working properly. The VolumeControl function doesnt work either. Does someone have a good working script with some explaination.
I also want to learn VBscripting, does someone have tutorials (if possible in dutch)?
T610 Ownage |
leongcks
Joined: Aug 17, 2003
Posts: 1
PM |
How do connect mobile agent to my t68i via msi bluetooth device?
I am getting the error 10047 in function connect (socket) Address family not supported by protocol family.
Thanks. |
porschefast
Joined: Aug 10, 2003
Posts: 12
PM |
Hi, any with t610 manage to get it work via IR?
always get +CMS Error 303 error message
i'm using 0.0.9.9
anyone can help?...tks
[ This Message was edited by: porschefast on 2003-08-18 10:46 ] |
skye
Joined: Jul 20, 2003
Posts: 2
PM |
Hi, I still can't get the fma s/w work with my T610 can someone help?
Thks in advance!
T610
Actisys IR
Win ME
Error msg "can't connect to phone"
"socket already in use"
03:41:29:990 Connecting...
03:41:29:990 Connecting via IRDA
03:41:30:040 Error 10045 in function setsockopt(SO_LINGER)
Operation not supported on socket
03:41:34:270 Connecting...
03:41:34:270 Connecting via IRDA
03:41:36:080 Connect: Socket already in use
03:41:46:080 Connecting...
03:41:46:080 Connecting via IRDA
03:41:47:290 Connect: Socket already in use
03:41:51:130 Connecting...
03:41:51:130 Connecting via IRDA
03:41:52:230 Connect: Socket already in use
03:42:02:280 Connecting...
03:42:02:280 Connecting via IRDA
03:42:04:040 Connect: Socket already in use |
porschefast
Joined: Aug 10, 2003
Posts: 12
PM |
how to get the log in fma?
Quote:
|
On 2003-08-19 10:46:32, skye wrote:
Hi, I still can't get the fma s/w work with my T610 can someone help?
Thks in advance!
T610
Actisys IR
Win ME
Error msg "can't connect to phone"
"socket already in use"
03:41:29:990 Connecting...
03:41:29:990 Connecting via IRDA
03:41:30:040 Error 10045 in function setsockopt(SO_LINGER)
Operation not supported on socket
03:41:34:270 Connecting...
03:41:34:270 Connecting via IRDA
03:41:36:080 Connect: Socket already in use
03:41:46:080 Connecting...
03:41:46:080 Connecting via IRDA
03:41:47:290 Connect: Socket already in use
03:41:51:130 Connecting...
03:41:51:130 Connecting via IRDA
03:41:52:230 Connect: Socket already in use
03:42:02:280 Connecting...
03:42:02:280 Connecting via IRDA
03:42:04:040 Connect: Socket already in use
|
|
|
Sander-
Joined: Aug 04, 2003
Posts: 39
From: Nederland
PM |
start fma from commandline (Start: Run...) then search for the exe file from fma and put -debug behind it. then u run it in debug mode and there will be a screen with al the info
T610 Ownage |
mystyle
Joined: Aug 19, 2003
Posts: 1
From:
PM, WWW
|
Operating System : W2K Pro
Phone : Sony Ericsson T610
Connecting Type : USB cable (Profilic USB to Seriall Comm)
Installed Softwares: XTNDConnect PC (Working - No Problem, I can change the names+numbers and syncronize)
My Problem is: Float's Mobile Agent does not work, It connects, finds t610, waits on initializing and disconnects after 10 sec...!
Does anyone has any idea.. I tried many settings but not solved the problem yet..
After I send the message I solved the problem... But Now I Got An error message +CMS ERROR 303 and then I can see the temp, voltage,etc.
What's The Difference:
I did following:
Right Click on My Computer -->Device Manager --> Ports --> USB (COM3) --> Port Settings
When I Make the Bit per seconds to 19200 and Float's Mobile Agent Baudrate to 19200 it gives the ERROR but, it connects...!
FMA Baudrate = 9600 AND PORT BIT RATE = 9600 : Stays on initializing, Cannot Syncronize Phone Book..
-------
FMA Baudrate = 19200AND PORT BIT RATE = 19200: Connects with ERROR 303 Can Syncronize Phone Book..
Thats all I can do..!! Any comments
[ This Message was edited by: mystyle on 2003-08-19 12:56 ] |
porschefast
Joined: Aug 10, 2003
Posts: 12
PM |
Hi, i also got the +crc error message. Here is my log
21:04:43:323 Connecting...
21:04:43:323 Connecting via IRDA
21:04:44:624 Disconnecting...
21:04:44:654 Disconnecting...
21:04:44:685 Disconnecting...
21:04:44:955 [TX] ATI
21:04:44:965 [RX] ATI
21:04:44:995 [RX] T610 series
21:04:44:995 [RX] OK
21:04:45:105 Initializing...
21:04:45:105 Turn off Command Echo
21:04:45:115 [TX] ATE0
21:04:45:125 [RX] ATE0
21:04:45:155 [RX] OK
21:04:45:165 Try switching character set to Latin-1
21:04:45:175 [TX] AT+CSCS="8859-1"
21:04:45:396 [RX] OK
21:04:45:406 Request calling line ident
21:04:45:406 [TX] AT+CLIP=1
21:04:45:596 [RX] OK
21:04:45:606 Request Alpha Tags
21:04:45:616 [TX] AT*EIPS=1,1
21:04:45:796 [RX] OK
21:04:45:806 [TX] AT*EIPS=2,1
21:04:46:006 [RX] OK
21:04:46:016 Enable Call Monitoring
21:04:46:026 [TX] AT*ECAM=1
21:04:46:207 [RX] OK
21:04:46:217 Enable New Msg Notification
21:04:46:227 [TX] AT+CNMI=3,1
21:04:46:407 [RX] +CMS ERROR: 303
21:04:46:417 Exception: +CMS ERROR: 303
21:04:46:427 [ERR] +CMS ERROR: 303
21:04:46:437 Enable Music Mute Notification
21:04:46:447 [TX] AT*EMIR=1
21:04:46:617 [RX] OK
21:04:46:627 Checking EOBEX Capability
21:04:46:637 [TX] AT*EOBEX=?
21:04:46:677 [RX] OK
21:04:46:687 [TX] AT*EAPN?
21:04:46:908 [RX] *EAPN: 1,"Normal"
21:04:47:428 [RX] *EAPN: 2,"Meeting"
21:04:47:438 [RX] *EAPN: 3,"In car"
21:04:47:448 [RX] *EAPN: 4,"Outdoors"
21:04:47:459 [RX] *EAPN: 5,"Port h-free"
21:04:47:469 [RX] *EAPN: 6,"Home"
21:04:47:519 [RX] *EAPN: 7,"Office"
21:04:47:629 [RX] *EAPN: 8,"TTY Accessory"
21:04:48:190 [RX] OK
21:04:48:210 [TX] AT*EAPS?
21:04:48:931 [RX] *EAPS: 1,"Normal"
21:04:48:941 [RX] OK
21:04:48:961 [TX] AT+CKPD=?
21:04:49:161 [RX] OK
21:04:49:171 [TX] AT+CPBS="SM"
21:04:49:361 [RX] OK
21:04:49:371 [TX] AT+CPBR=?
21:04:49:552 [RX] +CPBR: (1-200),80,18
21:04:50:102 [RX] OK
21:04:50:112 Retrieve Identification Information
21:04:50:122 [TX] AT+CGMI
21:04:50:263 [RX] SONY ERICSSON
21:04:50:863 [RX] OK
21:04:50:873 [TX] AT+CGMM
21:04:51:084 [RX] AAB-1021011-CN
21:04:51:604 [RX] OK
21:04:51:614 [TX] AT+CGMR
21:04:51:795 [RX] R1L013 CXC125585_CHINA_2
21:04:52:346 [RX] OK
21:04:52:356 [TX] AT+CGSN
anyone can help?
me using laptop built in IR |
stuartr_2003
Joined: Aug 14, 2003
Posts: 1
PM |
I have developed a mouse control for FMA which lets you control the mouse with the joystick on your phone. I need some people to test it and let me know if it works on there computer. If Anybodys interested please email me at stuart_f_robinson@yahoo.co.uk |
porschefast
Joined: Aug 10, 2003
Posts: 12
PM |
i found a way of getting around the crc error...........click refresh whenever u get into a new sub menu.....e.g click refreseh after u got into the sim contacts.....it should work.
got another question, for version 0.0.9.9 with t610, does new message gives a pop up box indicating new message has arrived?
tks |
topak2000
Joined: Aug 21, 2003
Posts: 1
PM |
Hi Float, Hi All..
First of all, I want to say that you made a great software.. its really cool.
Eversince, I have been fascinated with wireless technology, specially with that of Ir and Bluetooth and somehow wanted to develop some applications also.
I have been looking for codes in the internet regarding this, Ive seen lots but dont know where to begin with.
I am a developer also but I use Delphi 6.0. I found one source but it only detects the phone. and thats it. I was wondering how I could manipulate the contents of a particular phone.
Is there anything else that I need to know? Pls. help.  |
|
|
Posted: 2003-08-10 11:17
