| Author |
Hybrid Camera Driver for W800i/K750 part 2 |
djsquare
Joined: Sep 01, 2006
Posts: 47
PM |
On 2007-03-15 05:56:44, mr.v wrote:
On 2007-03-14 21:01:48, djsquare wrote:
1) Hi friends I really want to use your drivers but I am bit nervous about the the procedure through Far Manager.
2) I have A K750i with R1ca01 but I dont Know how to find C36 or C49, can anyone help me out how to find it out.I am from India.
3) Can I know that the 8.53 and 8.8 drivers are diffrent also I had heard about 9.0, 7.7, etc. Which are the latest and best.
5)My k750i is almost 6-7 mon old.I am sure that my lens move when auto focussing.
4) I am very confused, Please Help me Out.
Thanks a LOT in Advance.plzzzzzzzzzzzzzzzzzzz
Hi!
first tell me have you ever flashed your phone before or, have you used the Sony Ericsson Update Service before??
If not, that means your phone came pre-installed with R1CA021 firmware so it has to be CID49. All K750 fones that came pre-installed with firmware R1BC002 or higher are new CID49 K750s.
Well if you are not convinced, then download XS++ and check for yourself.
1) Thanks a lot for ur reply. I had not ever touched any of the firmware So that means I already had R1CA021 PREINSTALLED.
2) So as per ur knowledge it should be CID49.iS THERE ANY OTHER WAY TO find out.
3) Wats the diffrence between cid 36 and cid 49.which is better for cameras.
4) which are the customized drivers supported by CID49.
5) Thanks |
|
|
guguly
Joined: Jan 12, 2007
Posts: 120
PM |
On 2007-03-15 12:52:01, djsquare wrote:
1) Thanks a lot for ur reply. I had not ever touched any of the firmware So that means I already had R1CA021 PREINSTALLED.
2) So as per ur knowledge it should be CID49.iS THERE ANY OTHER WAY TO find out.
3) Wats the diffrence between cid 36 and cid 49.which is better for cameras.
4) which are the customized drivers supported by CID49.
First of all, most of your questions are OT (off-topic). This is the hybrid camera thread.but just the same, to answer some of your questions:
2) Connect your phone to Phone XS to find out if your phone is cid39 or 49. How to connect or use Phone XS? Try to read through the other threads for this topic.
3)Camera drivers are suited for both or either cid39 or 49. You just have to test it yourself (and there are plenty of drivers available) to see what suits you and your phone.
btw, its not only the camera driver that you can change in your phone. again, read through the other threads for w800/k750 modding.
goodluck. |
djsquare
Joined: Sep 01, 2006
Posts: 47
PM |
On 2007-03-15 14:55:26, guguly wrote:
On 2007-03-15 12:52:01, djsquare wrote:
1) Thanks a lot for ur reply. I had not ever touched any of the firmware So that means I already had R1CA021 PREINSTALLED.
2) So as per ur knowledge it should be CID49.iS THERE ANY OTHER WAY TO find out.
3) Wats the diffrence between cid 36 and cid 49.which is better for cameras.
4) which are the customized drivers supported by CID49.
First of all, most of your questions are OT (off-topic). This is the hybrid camera thread.but just the same, to answer some of your questions:
2) Connect your phone to Phone XS to find out if your phone is cid39 or 49. How to connect or use Phone XS? Try to read through the other threads for this topic.
3)Camera drivers are suited for both or either cid39 or 49. You just have to test it yourself (and there are plenty of drivers available) to see what suits you and your phone.
btw, its not only the camera driver that you can change in your phone. again, read through the other threads for w800/k750 modding.
goodluck.
Thanks Gugly for ur answers. Another few questions i would like to ask are...
1) Ther are many drivers I saw in the forums which are for display, sound, have anybody tried all this drivers and how good are they, I know Im asking very old questions but cant help it sory.
3) Can K750i loudspeaker be loud as W550i when hearing MP3 it would be great if its possible.
4) Wat do u mean by display drivers can u just explain me.
5) I think K790i or K800 would be having the best cam drivers to be used, so can we use those by editind their driver compatible for our K750i.
I would be very pleased to hear answers of the above questions point vice as its not only for me but many people could refer to ur answers.
thanxxxxxxxxxxxxxxxx in advance bye im waiting |
gxg
Joined: Nov 11, 2005
Posts: 270
From: Romania
PM |
djsquare
1. you are already oofff topic
2. k800 drivers are diffrent than k750 or W800-810 series.
3. make an account on www.se-nse.net and read there all about mooding.. ok?!
So... please be on topic.. or read all the post on subject. 1 year ago this was pioniering.. now is common information and if you google ypur questions.. you'l find them all.
mostly on se-nse.
So.. see you there.. but try to read and learn by yourself... nobody can tell you how good is that sound or how good is that display driver. you ave to test and keep the one who suit your needs.. That is THE BEST .. for you!
|
djsquare
Joined: Sep 01, 2006
Posts: 47
PM |
On 2007-03-15 16:42:17, gxg wrote:
djsquare
1. you are already oofff topic
2. k800 drivers are diffrent than k750 or W800-810 series.
3. make an account on http://www.se-nse.net and read there all about mooding.. ok?!
So... please be on topic.. or read all the post on subject. 1 year ago this was pioniering.. now is common information and if you google ypur questions.. you'l find them all.
mostly on se-nse.
So.. see you there.. but try to read and learn by yourself... nobody can tell you how good is that sound or how good is that display driver. you ave to test and keep the one who suit your needs.. That is THE BEST .. for you!
thanks gxg but i had already surfed a lot of forums in whichever site you name but I didn get any forum that K750i mediaplayer can be as loud as W550i loudspeaker.If you kno u can just write in 1 line yes or no.
|
tranced
Joined: Jan 19, 2006
Posts: > 500
From: Santo Domingo, wonDeRland
PM |
On 2007-03-15 16:58:06, djsquare wrote:
thanks gxg but i had already surfed a lot of forums in whichever site you name but I didn get any forum that K750i mediaplayer can be as loud as W550i loudspeaker.If you kno u can just write in 1 line yes or no.
w550 has two speakers
|
djsquare
Joined: Sep 01, 2006
Posts: 47
PM |
On 2007-03-15 17:10:08, tranced wrote:
On 2007-03-15 16:58:06, djsquare wrote:
thanks gxg but i had already surfed a lot of forums in whichever site you name but I didn get any forum that K750i mediaplayer can be as loud as W550i loudspeaker.If you kno u can just write in 1 line yes or no.
w550 has two speakers
Thanks Trance.
I dont think it does matter its just for surround its the output driver which makes the diffrence.Have you listened to Nokia Ngage loudnes even it has 1 Speaker so sounds more loud then K750 may be not clear as K750 right.
|
gxg
Joined: Nov 11, 2005
Posts: 270
From: Romania
PM |
there are some drivers to modd the sound. 4-5 versions for the acustics.
I never heard that SE loudspeaker...so.. I cannot compare... but for SE HW that K750i have... it's more than stock... this is for sure.
Now is my turn to ask why this 9.0 doesnt work in my phone.
even superdriver based on 7.7
Why for the name of the lord.. i get blurry pics??? |
guguly
Joined: Jan 12, 2007
Posts: 120
PM |
On 2007-03-15 22:42:14, gxg wrote:
there are some drivers to modd the sound. 4-5 versions for the acustics.
I never heard that SE loudspeaker...so.. I cannot compare... but for SE HW that K750i have... it's more than stock... this is for sure.
Now is my turn to ask why this 9.0 doesnt work in my phone.
even superdriver based on 7.7
Why for the name of the lord.. i get blurry pics???
my guess is that it's not suited for your phone. i have a w810i. i also get mostly blurry pics with 9.0 but with 7.7, pics are okay (although not that sharp).
gxg, i know you're not a fan of supermode but wouldn't it be great if you could incorporate your zuza49, w/c as you mentioned is still under testing, with supermode? at least, zuza49 with enhanced nightmode? |
BLKSNAKER
Joined: Apr 22, 2006
Posts: 149
PM |
On 2007-03-15 22:42:14, gxg wrote:
there are some drivers to modd the sound. 4-5 versions for the acustics.
I never heard that SE loudspeaker...so.. I cannot compare... but for SE HW that K750i have... it's more than stock... this is for sure.
Now is my turn to ask why this 9.0 doesnt work in my phone.
even superdriver based on 7.7
Why for the name of the lord.. i get blurry pics???
There are some phones wich maximum sharpness value is 5...9.0 camdriver uses 6 as maximum...which is the value my phone and many others take as maximum in sharpness...so...in phones wich maximum value is 5...9.0 camdriver will give blurry pics...the solution is simple...edit the sharpness line of the driver and youll get great pictures.
More samples...
Cute drops...
Kind of low light (+0.3EV)...
Low light Macro (No EV correction)...
 |
spinky
Joined: Dec 27, 2005
Posts: 45
PM |
w810 with original camera driver
[ This Message was edited by: spinky on 2007-03-16 00:49 ] |
stingjoel
Joined: Jan 24, 2005
Posts: 265
From: Indonesia
PM |
Have you try paparazy camdriver? if you aren't satisfy with your choosen camdriver, just try it in here: http://www.esato.com/board/viewtopic.php?topic=141735
P.S. I am not paparazy or his friend or his family  I just like his camdriver  |
dragonball75
Joined: Jul 02, 2006
Posts: 32
PM |
On 2007-03-16 00:30:24, BLKSNAKER wrote:
There are some phones wich maximum sharpness value is 5...9.0 camdriver uses 6 as maximum...which is the value my phone and many others take as maximum in sharpness...so...in phones wich maximum value is 5...9.0 camdriver will give blurry pics...the solution is simple...edit the sharpness line of the driver and youll get great pictures.
I'm thinking you're right on this , so please could you tell me how I change my sharpness value to 5 ? Thanks in advance dude |
guguly
Joined: Jan 12, 2007
Posts: 120
PM |
On 2007-03-16 07:48:06, dragonball75 wrote:
I'm thinking you're right on this , so please could you tell me how I change my sharpness value to 5 ? Thanks in advance dude
in your camdriver.dat, there are these lines:
seq_init=05 02 00 0B D0 #CMD_END
05 02 00 0C 07 #CMD_END
06 02 00 01 00 52 #CMD_END
05 02 00 18 00 #CMD_END
06 02 00 01 04 56 #CMD_END // Sharpness 4
06 02 00 01 01 55 #CMD_END;
in this example, the setting is set at 4 (04). simply change that to 05 |
gxg
Joined: Nov 11, 2005
Posts: 270
From: Romania
PM |
thank you for your answers... I already did that sharpness trick in my last 2 drivers.
that post was an almoust retoric one... because I cannot understand why SE released some HW for max sharp 5 and the rest with 6.
it's crazynesss...
Anyway.. nice pics...
BUT consider that the quality of the pics is also constrained by compresion and the ammount of info in that pic. ( I'm not refering to old disscusion which one is best? 200k or 600k picture).
Is what you allow(by driver) to senzor to "see" and what you allow to imprint in picture.
|
|
|
Posted: 2007-03-15 12:52
jay0726 | 
