| Author |
Super camera driver for k750/w800/w810 |
silverxii
Joined: Aug 26, 2007
Posts: 8
PM |
Just tested K750i CID49 with A4A7.8
full auto (still has some exposure problems... due to indoor lighting i think)
exposure set to 1.7, others auto
lpachuong:
when i focus at a spot where there is lighting somewhere near the sides/corners the image will flicker between a blue and a yellow hue. is that a problem that is fixable?
also, the cid49 version picks up a bit too much yellow currently i think. the chair in the second pic is not supposed to be so greenish. also, the floor ain't that yellow too. however, its just slight. not that noticeable unless you compare it in detail.
thanks anyway for releasing it so quickly
[ This Message was edited by: silverxii on 2007-08-29 18:13 ] |
|
|
wickedsick
Joined: Aug 16, 2007
Posts: 161
PM |
Play with EV +2.0 and zoom 1.3 then it will be fine. I'm sure. Read his manual carefully and play with it more to understand exposure. |
lpachuong
Joined: Jun 06, 2007
Posts: > 500
From: Vietnam
PM |
Yes, that right. Since CID49 catch blue very well so i lower it down by add extra yellow with will be fine for out door pictures. If you dont like the setup you can create 1 by yourself for WB_SET. Now read my instruction carefully and you will know how to do it. You will also see how difficult it is. I just try my best and try with my phone. I share all of what I know to you guys. 1 day you will be able to create 1 by yourself. Ill relax for 1 day and waiting for other comments
[addsig] |
DesMono
Joined: Aug 07, 2007
Posts: 14
PM |
Normal Mode, All Auto - A4A v7.8
Normal Mode, All Auto - Jonaugust v54.6
Macro + flash - A4A v7.8
Macro + flash - Jonaugust v54.6
__________________
Driver Jonaugust v54.6
In macro a mode of colour it is better than A4A v.7.8
*P.S. I use SE k750i (R1BC002 CID36)
[ This Message was edited by: DesMono on 2007-08-29 18:52 ] |
DesMono
Joined: Aug 07, 2007
Posts: 14
PM |
But it is pleasant to me in driver Jonaugust v54.6
•Change Zoom => macro on, Normal Mode 16x - Night Mode 6x
•effects
2.3 negative, 2.4 solarise, 2.5 sepias, 2.6 CH/B, 2.7 negative sepia, 2.8 negative ch/B |
tommymar
Joined: Aug 10, 2007
Posts: 76
PM |
Did you play with zoom 1.3 at zoom 2.0 for Led I'm sure you haven't Don't post any comment like that if you haven't tried everything out. |
wickedsick
Joined: Aug 16, 2007
Posts: 161
PM |
On 2007-08-29 19:51:07, DesMono wrote:
Normal Mode, All Auto - A4A v7.8
Normal Mode, All Auto - Jonaugust v54.6
Macro + flash - A4A v7.8
Macro + flash - Jonaugust v54.6
__________________
Driver Jonaugust v54.6
In macro a mode of colour it is better than A4A v.7.8
*P.S. I use SE k750i (R1BC002 CID36)
[ This Message was edited by: DesMono on 2007-08-29 18:52 ]
which driver of a4a did you use? |
silverxii
Joined: Aug 26, 2007
Posts: 8
PM |
Full auto
Profile1.3
Profile1.2
As we can see... there are differences in the colour depending on what conditions. Default has a balance of blue/yellow, 1.3 is blu-ish, 1.2 is rather yellow but warm. |
rolkabolka
Joined: Apr 21, 2007
Posts: 13
PM |
Hy, Could somebody upload Sarmad's 5.8 because i don't find it.
Is that the same like 5.7 beta... supermode?
I don' need supermode but if it is a simple good driver like the 5.7 was, than i want it. Please do so...
|
lpachuong
Joined: Jun 06, 2007
Posts: > 500
From: Vietnam
PM |
Read my instruction. You can edit/add/delete the colour profile. If you want Pilya profle then replace wb_set with this one:
WB_SET= $p1 01
$c1 00 #SET(20, f0) #SET(21, e4) $cl
$c1 01 #SET(20, 00) #SET(21, d4) $cl
$c1 02 #SET(20, e4) #SET(21, 00) $cl
$c1 03 #SET(20, f8) #SET(21, f0) $cl
$c1 04 #SET(20, F0) #SET(21, F8) $cl
#SET(20, 00) #SET(21, 00)
$cx $cx $cx $cx $cx #CMD(13,01);
Pilya's colour profile is not good in the late afternoon and long range pictures since WB is not suitable for CID49 sensor
Next week i go back to school, no time to play with this any more. Good bye. WIll see you around sometimes.
Now I realize how cheap and wasteful time I have spent for this one. Creating somethings for someone but they don't know how to use/improve/take advantage. How boring this world is.
_________________
To be or not to be !!! 
Please save our world. Save our world to save our lives and our generation. 
There is no place as good as your house with your family. Home sweet home. 
[ This Message was edited by: lpachuong on 2007-08-29 19:34 ] |
DesMono
Joined: Aug 07, 2007
Posts: 14
PM |
which driver of a4a did you use?
A4A - camdriver0 7.8 CID36
|
BundyRRR
Joined: Apr 27, 2007
Posts: 210
From: Poland
PM, WWW
|
@ rolkabolka
http://www.camdrivers.wz.cz/sarmad.html
enjoy  |
strong
Joined: May 18, 2007
Posts: > 500
From: Greece
PM |
On 2007-08-29 09:57:16, salambaba wrote:
@Raider and @sarmad
Very thanks because of your good camdrives .
Raider your driver is perfect in Focus and Speed of focus and the options ,
But mybe your driver have more detailes in taken pictures because of little darker pic
but in sun light scences the pictures seem darker and if anyone see those conjecture that
the pictures are taken in cloudy air conditions and also your camdriver take the photos
a little yellow wish in compare with sarmad 5.8 .
And the Sarmad driver has good focus and good real color but i dont like this options and
Focus speed . ( its only my idea )
For example in this pic that taken with 6.5 is a little darker and its seem taken in cloudy
condition .
and in this picture the raiders one seem a little yellow .
If you merg this two camdrives , we have best camdrive for W810 with this options :
All setting from 6.5TEST5 raider + color setting from 5.8 sarmad . (mybe only for me )
very very thanks
My SUPERMODMIX v1.1 has sarmads colors and Raiders exprosure
[ This Message was edited by: strong on 2007-08-29 19:46 ] |
tommymar
Joined: Aug 10, 2007
Posts: 76
PM |
On 2007-08-29 20:26:41, lpachuong wrote:
Read my instruction. You can edit/add/delete the colour profile. If you want Pilya profle then replace wb_set with this one:
WB_SET= $p1 01
$c1 00 #SET(20, f0) #SET(21, e4) $cl
$c1 01 #SET(20, 00) #SET(21, d4) $cl
$c1 02 #SET(20, e4) #SET(21, 00) $cl
$c1 03 #SET(20, f8) #SET(21, f0) $cl
$c1 04 #SET(20, F0) #SET(21, F8) $cl
#SET(20, 00) #SET(21, 00)
$cx $cx $cx $cx $cx #CMD(13,01);
Pilya's colour profile is not good in the late afternoon and long range pictures since WB is not suitable for CID49 sensor
Next week i go back to school, no time to play with this any more. Good bye. WIll see you around sometimes.
Now I realize how cheap and wasteful time I have spent for this one. Creating somethings for someone but they don't know how to use/improve/take advantage. How boring this world is.
_________________
To be or not to be !!!
Please save our world. Save our world to save our lives and our generation.
There is no place as good as your house with your family. Home sweet home.
[ This Message was edited by: lpachuong on 2007-08-29 19:34 ]
So another modder has gone |
BundyRRR
Joined: Apr 27, 2007
Posts: 210
From: Poland
PM, WWW
|
Can somebody add colors from Raiderski 6.4 and supermode to Sarmad's 5.8 ? |
|
|
Posted: 2007-08-29 19:09
