| Author |
K700 online update service is back up! |
Fjodis
Joined: Dec 16, 2004
Posts: 6
From: Eskilstuna
PM |
@hazart
@Rex
No I'm not a SE employee.
I saw these warning lines too and you made me doubt my
math skills, so I've counted the frames 10 times now and they are still 21 and I haven't found anything else wrong with the phone, yet....
------------------------------------------------
If I save time when do I get it back? |
|
|
juleyah
Joined: Aug 24, 2004
Posts: 21
From: Stockholm
PM |
Hi! I have FW R2AA003. Should I update?
Have heard that the update service online is malfunctioning. Is that still the case?
Jules
[ This Message was edited by: juleyah on 2004-12-18 11:12 ] |
FuricTrax
Joined: Jan 31, 2002
Posts: 261
From: West Midlands, UK
PM |
@juleyah
From what I have heard R2AA003 is a fairly recent unbranded firmware. I have heard of R2AE though...
SE started @ R2A...and when thru the alphabet....and now they have been round once thus the second A.
@vanquish
I think the latest Orange Firmware is R2Y.
[ This Message was edited by: FuricTrax on 2004-12-18 11:59 ] |
heppell2k
Joined: Aug 27, 2002
Posts: 164
PM |
Is the O2 firmware available or not? Mycfurrent firmware is R2L001. Can this be updated |
hazart
Joined: Nov 09, 2004
Posts: 187
From: London, U.K.
PM, WWW
|
@Rex:
I think what the warning lines in the log mean is a key to the problem because they are the only bits in the log that look abnormal.
@Fjodis:
Sorry, Fjodis; we were just kidding.  BTW, is every single frame OK on your phone? Because I have 21 frames but two of them are corrupted.
@juleyah:
Congratulations! Your phone FW is newer than that on SEUS! Yes, SEUS is still buggy and we are trying to make some conclusions. |
kenski
Joined: Aug 15, 2002
Posts: 369
From: Philippines
PM |
has someone had an errorless log generated by the SEUS?
 forever Read the FAQ before u post a new topic.. 8810->6150->3310->t68i->t610->t630->k700i  |
Matt P
Joined: Dec 12, 2004
Posts: 6
PM |
"<>From what I have heard R2AA003 is a fairly recent unbranded firmware. I have heiard of R2AE though..."
I've got R2AA003 factory installed on my K700i, which is branded (T-Mobile UK).
It's really annoying, a pink bar above the right button. Looks rubbish and mucks up the themes. And it's pink.
Matt |
brandon7
Joined: Dec 18, 2004
Posts: 6
PM |
Well hello friends !! i would like to tell you my story. Well i tried to update my K700 through the online site of SE ! So everything was going fine, the java applet was open it closes my phonem, it made initialization and said to me that : Your mobile is already up to date.
I have R2AA and i am trying to put R2L in my phone.
Here is the strange thing. I read many forums and i read that after that point the online system asks the user if he is sure that he wants R2L although he has R2AA !!
So ... nothing happens after that !! The program closes normally and the site is taking me to a place where says:
------------------------------------------------------------------------------
No need to update
Your device already has the latest software. We look forward to assist you again soon.
Thank you for using Sony Ericsson Update Service!
----------------------------------------------------------------------------
Is there something new??Sony ericsson change the updater ?? And why ?? Anyone have a clue ?? I am putting the log if anyone wants to help me !! Thx and sorry for my bad english
05.04.19:181 2 Info Device IMEI number: (by) homeflash.jd
05.04.20:763 3 Info Device IMEI number: (by) homeflash.jd
05.04.22:526 4 Info Battery: +CBC: 0,92 (by) homeflash.jd
05.04.22:976 5 Info Turn Off: (by) homeflash.jd
05.04.26:151 6 Info Rev: R2AA003 R2AA003 prgCXC125821_EU_1_C (by) homeflash.wd
05.04.26:151 7 Info CDA: CDA102286/10 (by) homeflash.wd
05.04.38:048 8 Info ScriptVersion = R2AA003 R2AA003 prgCXC125821_EU_1_C (by) homeflash.jd
05.04.38:048 9 Info DeviceVersion = R2AA003 R2AA003 prgCXC125821_EU_1_C (by) homeflash.jd
05.04.38:058 10 Info Software up to date (by) homeflash.wd
05.05.34:950 11 Info Update aborted due to up to date SW (by) homeflash.wd
|
FuricTrax
Joined: Jan 31, 2002
Posts: 261
From: West Midlands, UK
PM |
@brandon7
Isn't R2L older firmware than R2AA??
@Matt P
Oops!!! I have an Orange branded R2L installed! Isn't there a customisation file that they also have on the phone to add stuff like that?
[ This Message was edited by: FuricTrax on 2004-12-18 23:32 ] |
brandon7
Joined: Dec 18, 2004
Posts: 6
PM |
yeap it is older but i think i have the version that SE pull back during some problems !! that's why i want to get back to R2L ! |
Fjodis
Joined: Dec 16, 2004
Posts: 6
From: Eskilstuna
PM |
@hazart
The frames looks alright on the screen anyway, or do you get the "corruptness" in a actual photo? |
hazart
Joined: Nov 09, 2004
Posts: 187
From: London, U.K.
PM, WWW
|
@Fjodis:
If I preview the Angel frame, only the top bit of it will display. If I select this frame and shoot with it, the picture will come out without any frame.
|
Inkydinkydink
Joined: Oct 05, 2004
Posts: 2
PM |
Hi, not sure if this is supposed to be here or not, but i've tried to update my SE phone, and it goes through all the procedure, but right after it downloads and installs the file 'seus_setup115' that they need, it sit there with that webpage 'Download and installing Client app, After completing the installation you will be automatically redirected to the correct web page, Do not close this page'. It just sits there for a long time. I turned off Firewall, i've stopped all programs from running, and i tried everything that i could to get it to work, but it just wont upgrade. I got it to work once, but my harddrive broke and i couldnt do it again. I'm using the DSS-20 that i borrowed, and everything is charged up. Please help or direct me to where i can read up on this problem. Thanx. |
Rex
Joined: Nov 01, 2004
Posts: 52
PM |
Quote:
|
On 2004-12-18 15:36:22, hazart wrote:
@Rex:
I think what the warning lines in the log mean is a key to the problem because they are the only bits in the log that look abnormal.
|
|
@hazart
I'm not so sure in this any more. Maybe if someone shows me a log to R2L update without warning lines... Besides it doesn't make no sense. If the fw was corrupted, why it comes before turn off? Does it run a test on fw within 4sec before it turns the mobile off? And if the fw is damaged, why does it perform the update, continue the process? |
Rex
Joined: Nov 01, 2004
Posts: 52
PM |
@brandon7
I think there is no possibility to downgrade by SE US. It supports the update process. What you need is a reflash. Go to the first SE Service point and ask them... |
|
|
Posted: 2004-12-18 12:01
forever 
