| Author |
Super camera driver for k750/w800/w810 |
lpachuong
Joined: Jun 06, 2007
Posts: > 500
From: Vietnam
PM |
Hello 
[addsig] |
|
|
Power_VANO
Joined: Jun 02, 2007
Posts: 144
From: Georgia
PM, WWW
|
My modded Sarmad 5.8 failed the stability tests halfly 
When i tested it in bathroom, it was definitely more stable than the original, but now I tested it with my camdriver stability test room and it is just as unstable as the original
But I wonder if the slow viewfinder can cause this stability problems. I dont know where is this code, so lpachuong can you edit Sarmad 5.8 with A4A viewfinder code now if it doesnot need much time?
I do it from behind...
Permanent CamDriver Download Location:
http://downloads.wow-info.net/se/drivers/camera/ |
lpachuong
Joined: Jun 06, 2007
Posts: > 500
From: Vietnam
PM |
How is it now, Power_Vano?
amarsidhu , have you found your phone?
Raiderski, where are you, Mast** ? Are you going to sell your w800i CID36 I'm just joking.
I'm bored
********************************
[addsig] |
lpachuong
Joined: Jun 06, 2007
Posts: > 500
From: Vietnam
PM |
 I think I will be banned
[addsig] |
Power_VANO
Joined: Jun 02, 2007
Posts: 144
From: Georgia
PM, WWW
|
lpachuong
I have tested A4A 6.3 and...
It is OK when using Fine Quality+EM, camera crashed 2 times out of 15, but...
When I added LED, camera crashed 10 out of 15 times.
With Nightmode (no LED) crashed 11 out of 15 times.
With Nightmode+LED crashed 15 out of 15 times.
So the result is (if you only chaged compression settings) that new compression settings are unstable. I think this maybe the issue with sarmad's drivers too.
But I will test your edited with fast viewfinder first.
Can you also edit original Sarmad's 5.8 and my edited Sarmad 5.8 with A4A 6.2 compression and quantizier code?
I do it from behind...
Permanent CamDriver Download Location:
http://downloads.wow-info.net/se/drivers/camera/ |
Coquito
Joined: Mar 28, 2007
Posts: > 500
From: Moca, Rep.Dom
PM, WWW
|
hello guys, i change my phone k750i cid 49 to w810i, and i notice the diference, w810i take better pictures, i m using BLKsnaker 9.22 is a very good driver for day shots and chenrong 8.53 for night shot, thanks BLKsaker and chenrong
|
lpachuong
Joined: Jun 06, 2007
Posts: > 500
From: Vietnam
PM |
On 2007-08-21 19:35:29, Power_VANO wrote:
lpachuong
I have tested A4A 6.3 and...
It is OK when using Fine Quality+EM, camera crashed 2 times out of 15, but...
When I added LED, camera crashed 10 out of 15 times.
With Nightmode (no LED) crashed 11 out of 15 times.
With Nightmode+LED crashed 15 out of 15 times.
So the result is (if you only chaged compression settings) that new compression settings are unstable. I think this maybe the issue with sarmad's drivers too.
But I will test your edited with fast viewfinder first.
Can you also edit original Sarmad's 5.8 and my edited Sarmad 5.8 with A4A 6.2 compression and quantizier code?
Thanks Power_VANO. I tested 6.3 outdoor with daylight and it is fine so far (with new compression, I have 7 600kb+ and all 500kb+). I will be able to test nightshot next 3 hours But from what you said, I think I get some idea for it now. And you are right. The compression is the big problem. About the code, you can edit my code if you want It doesn't matter. I am really happy if there are more testers and modders that can make our phones worthy
On 2007-08-21 19:40:13, coquito wrote:
hello guys, i change my phone k750i cid 49 to w810i, and i notice the diference, w810i take better pictures, i m using BLKsnaker 9.22 is a very good driver for day shots and chenrong 8.53 for night shot, thanks BLKsaker and chenrong
What do you mean by changing your phone? You meant the firmware?
----------
I forget. I'm using k750i cid49 @ w800i r1bd001 cid49
_________________
To be or not to be !!! 
W800i/K750i driver: A4A - 4.5 11/08/2007
http://www.freewebs.com/ict2006_2007/A4A_4.5.RAR
[ This Message was edited by: lpachuong on 2007-08-21 18:45 ] |
Power_VANO
Joined: Jun 02, 2007
Posts: 144
From: Georgia
PM, WWW
|
lpachuong
Thanks Power_VANO. I tested 6.3 outdoor with daylight and it is fine so far (with new compression, I have 7 600kb+ and all 500kb+). I will be able to test nightshot next 3 hours But from what you said, I think I get some idea for it now. And you are right. The compression is the big problem. About the code, you can edit my code if you want It doesn't matter. I am really happy if there are more testers and modders that can make our phones worthy
Yes, daylight is not a problem
But I have got an idea:
What if you code Normal Quality with absolutely same settings as Fine Quality but use A4A 6.2 compression settings in Normal Quality and new settings for Fine Quality? the only difference between Normal and Fine should be compression. So, at night we will use Normal, at daylight - Fine.
And we wont get that stability issues
I will try to mod Sarmad 5.8 with 6.2 compression settings now...
What do you mean by changing your phone? You meant the firmware?
nop. I guess he bought w810 as it is not possible to flash k750 with w810 firmware.
_________________
I do it from behind...
Permanent CamDriver Download Location:
http://downloads.wow-info.net/se/drivers/camera/
http://picasaweb.google.com/powervano
[ This Message was edited by: Power_VANO on 2007-08-21 18:51 ] |
Coquito
Joined: Mar 28, 2007
Posts: > 500
From: Moca, Rep.Dom
PM, WWW
|
i sold my k750i and bought a w810i.
other thing i notice is that w810i take less time to save the picture than k750i
@lpachuong: as you say that you driver is for k750 cid 49, it will work fine in w810i?
sorry for my english
_________________
Dont You Wish Life Had Background Music To Go With It?  
[ This Message was edited by: coquito on 2007-08-21 19:07 ] |
lpachuong
Joined: Jun 06, 2007
Posts: > 500
From: Vietnam
PM |
You are right that the compression in normal quality is lower than in fine quality. And I think that is a good idea for A4A Actually I used to think about it but I wasn't successful. I thought like this: Fine quality and normal quality have the same settings and with EM already when macro on. Macro of for EM off. Fine quality for dayshot, outdoor shot. Normal quality for indoor shot and night shot and MXE-60. And I tried with this idea but sometimes EM didn't work so I ended it However, when my current version is done, I will go back to this idea. Now i just have problems after I changed the compression and fixed the locked-autofocus from the previous versions. I really appreciate your help.
[addsig] |
Power_VANO
Joined: Jun 02, 2007
Posts: 144
From: Georgia
PM, WWW
|
coquito
Yep, it will work fine in w810
and w810 has a bit better processor and camera module than k750
I do it from behind...
Permanent CamDriver Download Location:
http://downloads.wow-info.net/se/drivers/camera/ |
Power_VANO
Joined: Jun 02, 2007
Posts: 144
From: Georgia
PM, WWW
|
lpachuong
I have tested 6.4. It is very unstable. Even more unstable than 6.3. It craches very often even when I use only Fine Quality+EM+Macro on
And YEEEEEEEESSSS!!!! I succeeded! I've modded original Sarmad 5.8 with A4A 6.2 compression settings and it works like a charm at my stability test environment. It hasnot crashed even once! and I took about 30 pics with different settings including LED, Nightmode, ENM+LED...
So you have got new camdriver modder even though I dont understand those codes well
In a minute I will upload edited camdriver and post a link to it.
_________________
I do it from behind...
Permanent CamDriver Download Location:
http://downloads.wow-info.net/se/drivers/camera/
http://picasaweb.google.com/powervano
[ This Message was edited by: Power_VANO on 2007-08-21 19:25 ] |
Vipera ammodytes
Joined: Sep 22, 2004
Posts: > 500
From: Serbia
PM |
Hi guys.
What is best SPU driver?? and any tutorial how ti use?
OnePlus 8 |
Power_VANO
Joined: Jun 02, 2007
Posts: 144
From: Georgia
PM, WWW
|
See http://downloads.wow-info.net/se/drivers/camera/ or http://www.camdrivers.wz.cz you will find SPU drivers and tutorial there.
I do it from behind...
Permanent CamDriver Download Location:
http://downloads.wow-info.net/se/drivers/camera/ |
Power_VANO
Joined: Jun 02, 2007
Posts: 144
From: Georgia
PM, WWW
|
Sarmad 5.8 with lpachuong A4A 6.2 Compression Settings by Power_VANO
http://downloads.wow-info.net[....]rmad_5.8_edited_Power_VANO.dat
First of all, I modded Sarmad 5.8 because of its stability issue on k750/w800 phones at night/low light shots. With A4A 6.2 Compression Settings Sarmad 5.8 works like a charm on my K750 CID49 at night/low light (have not tested it at daylight).
All the settings work like original Sarmad 5.8.
Have fun,
Power_VANO
Fine Quality+EM+LED+Nightmode+Self Timer (See how stable this driver is )
But these settings are not needed for good quality. You will get better quality with only Fine Quality+EM (and maybe +LED in very low/no light).
Sarmad
As you see, the main reason of unstable work of 5.8 was compression settings again. So now as you know the issue, you can mod your 5.8 for k750/w800
lpachuong
Are you here, friend?
_________________
I do it from behind...
Permanent CamDriver Download Location:
http://downloads.wow-info.net/se/drivers/camera/
http://picasaweb.google.com/powervano
[ This Message was edited by: Power_VANO on 2007-08-21 19:51 ] |
|
|
Posted: 2007-08-21 19:00
