| Author |
Super camera driver for k750/w800/w810 |
the_wog29
Joined: Apr 24, 2007
Posts: 1
PM |
@ amarsidhu,
what settings did you use to take those photos of the garden at night?
thanks, |
|
|
stingjoel
Joined: Jan 24, 2005
Posts: 265
From: Indonesia
PM |
On 2007-08-09 09:22:52, DarKMaGiCiaN wrote:
@Raiderski
your driver is tested with two comment
1. focus
when you want to take a shot of something with auto focus ( in manual it needs between 1.1-2 )
the auto focus faild and range it to about (2.2-4)
2. color of the pic is little yellowish
check the pic and you'll know what I mean ^_^
compairing with DarKMaGiCiaN 0.91 with some modification (lpachuong)
^_^
_________________
Ericsson T29s>Ericsson R320>Ericsson T68 >Sony Ericsson T300>Sony Ericsson J300i>Sony Ericsson K750i>Sony Ericsson M600
...... waitting for new S type
[ This Message was edited by: darkmagician on 2007-08-09 08:37 ]
@DarKMaGiCiaN,
Raiderski's camdriver more sharper than DarKMaGiCiaN 0.91 with some modification....I can read word "UNO" in raiderski picture but not in yours.
Take a look at picture #2...at the earphone...lokk at the two holes, raiderski's picture is more sharper! 
K750i CID36 R1CA021 APAC. |
DarKMaGiCiaN
Joined: Aug 25, 2006
Posts: > 500
PM |
@stingjoel
thanks for the comment I'll try to compair more because I think these two pic were macro shots so it is hard to compair the sharpness
any way I didnt upload the comparison because I want to compair Raiderski driver with mine
I just uploaded it because Raiderski asked for comments and I did it with pics
( as I'm using my cameradiver so this is the only way I can clear what I want to say )
^_^
[ This Message was edited by: DarKMaGiCiaN on 2007-08-09 09:31 ] |
Raiderski
Joined: Jul 03, 2006
Posts: > 500
From: Poland, Hell, Mountains
PM, WWW
|
terminator17
i will never combine functions in this way. fine mode should be fine mode and nothing more. in my driver:
- spot can be enabled separately [EV +1.0, zoom 1.1]
- EM can be enabled separately [EV +0.7, zoom 1.1]
- EM can be default available in normal quality when EM_ON_NORMAL_QUALITY parameter is 01
so, why should i combine functions? about normal and fine mode... you are too much accustomed with no-supermode solutions in 6.x normal and fine is just normal and fine, nothing more 
DarKMaGiCiaN
1. do you mean close shots in normal (no-macro) mode? in this situation macro range scan (~40cm) is not available, i've explained this already but i can repeat if someone wish
2. yes but when you use CC (color correction) you forget about one important (in my opinion) thing. to remove yellow (warm) CC will balance to more blue (cold) color and this good if you always have light conditions which has more yellow. what if light conditions will be cold, for example cloudy/winter day? in this situation almost no yellow is avalable and additional CC will add more blue :/ as you can see i don't like CC at all because it isn't universal for all light conditions. my way to resolve white balance and other scene properties is in "self defined profiles". in 6.5 T3 user can modify yellow/blue and green/magenta balance, i shouldn't burden him with additional CC on which he has no influence
cheers
_________________
W800 CID36 R1BD001
www.flickr.com/photos/8469432@N06/
[ This Message was edited by: Raiderski on 2007-08-09 09:32 ] |
terminator17
Joined: Jul 04, 2007
Posts: 155
PM, WWW
|
@raiderski
i was saying that in other point of view like if some one else use my fone ,i dont need to tell them every time that go ev 0.7 n zoom 1.1
hope u understand what i am saying
4r spot
sry my mind was smwr else..i was asking about ISO ..and whats it exactly different from exposure and all?? |
DarKMaGiCiaN
Joined: Aug 25, 2006
Posts: > 500
PM |
On 2007-08-09 10:31:49, Raiderski wrote:
DarKMaGiCiaN
1. do you mean close shots in normal (no-macro) mode? in this situation macro range scan (~40cm) is not available, i've explained this already but i can repeat if someone wish
2. yes but when you use CC (color correction) you forget about one important (in my opinion) thing. to remove yellow (warm) CC will balance to more blue (cold) color and this good if you always have light conditions which has more yellow. what if light conditions will be cold, for example cloudy/winter day? in this situation almost no yellow is avalable and additional CC will add more blue :/ as you can see i don't like CC at all because it isn't universal for all light conditions. my way to resolve white balance and other scene properties is in "self defined profiles". in 6.5 T3 user can modify yellow/blue and green/magenta balance, i shouldn't burden him with additional CC on which he has no influence
cheers
1.check the pic ( it is with auto focus )
I tried to change the focus point and still same result
2. no comment because you are right ( Now it is clear for me ) ^_^
thanks
Raiderski |
ebird
Joined: Apr 01, 2007
Posts: 4
PM |
@Raiderski
I tested your 6.5 TEST 3 and it makes real good pictures but I have two suggestions for next one...
1. could you add JPEG Quality Parameters for each normal and fine mode to your driver and
2. could you change Zoom EV to -0.3 so that its not between the White Balances...
The rest is just perfect for me!!
Btw the "cloudy landscape" profile works great!!
Another cool feature maybe would be...
Auto JPEG Compression like in BLKSnaker's driver and then switching supermode on/off by changing fine/normal quality...
[ This Message was edited by: ebird on 2007-08-09 10:52 ] |
whatsucka
Joined: Feb 17, 2007
Posts: > 500
PM, WWW
|
@Raiderski
i was juz wondering can da zoom b at 16x like chengrongs driver?
is the default settin in camdriver.dat for 15 fps video recording?
|
terminator17
Joined: Jul 04, 2007
Posts: 155
PM, WWW
|
no need of 16x zoom
quality wont be that good.
but yeah raiderski try improving the quality of zoom @4x
i think BLKsnaker's zoom and sarmad(not sure) zoom pics are of better quality |
Raiderski
Joined: Jul 03, 2006
Posts: > 500
From: Poland, Hell, Mountains
PM, WWW
|
terminator17
don't share with your phone - particularly if this is your girlfriend or wife  and now seriously... i agree with your point of view. if you want EM without any EV/zoom changes then you can enable it as standard in "normal quality" (look at EM_ON_NORMAL_QUALITY description in readme.txt)
when you set low EV compensation (exposure) and above average shutter speed then ISO will be low. i almost always use this combination when light conditions are bad, sometimes i'm lazy and prefer EM/ENM which also gives great result. ISO control in 6.5 TEST4? maybe...
DarKMaGiCiaN
this kind of effect is possible only in 2 situations:
1. no autofocus but manual focus (~3.0) is used
2. macro mode is enabled <--- this is most probably in your case
when macro mode is enabled then macro range scan is only used because it's faster than full range scan (it's useless in close shots)
ebird
1. nope, now i have highest stable (i hope so) quality settings and i don't want any other modifications in this matter
2. you can do this yourself, this is very easy open code in notepad and search for "EV_M_10=". this will be in big -CUSTOMIZE- block which you can reorganize as you wish for your own preferences.
EV_sign_value, where:
sign = M for minus or P for plus
value = EV value without dot (10 = 1.0)
|
Raiderski
Joined: Jul 03, 2006
Posts: > 500
From: Poland, Hell, Mountains
PM, WWW
|
terminator17
different zoom quality is illusion. in driver we can only set method of how big zoom can be or to be precise: how big zoom step will be after zoom change by 0.1
interpolation algorithm is in firmware and it's common for all drivers
|
terminator17
Joined: Jul 04, 2007
Posts: 155
PM, WWW
|
yeah okay
but quality wise fine mode better than normal i guess...
n look on zoom matter also
i just stated |
terminator17
Joined: Jul 04, 2007
Posts: 155
PM, WWW
|
On 2007-08-09 12:17:25, Raiderski wrote:
terminator17
different zoom quality is illusion. in driver we can only set method of how big zoom can be or to be precise: how big zoom step will be after zoom change by 0.1
interpolation algorithm is in firmware and it's common for all drivers
ohh okay..u know more newaz..
hope to see ur test 4 driver soon.. |
terminator17
Joined: Jul 04, 2007
Posts: 155
PM, WWW
|
one more thing
whn shal we use manual focus at zoom 4...
wen it is exactly used |
679
Joined: Oct 05, 2006
Posts: 174
PM |
@Raiderski
I used to use 21.92 for a while. Like it for quality and simplicity. But need simplify it a little bit more...
Seems i don't need SPOT function in manual focus mode (Macro ON, Zoom 1.2-4.0) and zoom preview. Is it possible turn both it off in driver text?
THX |
|
|
Posted: 2007-08-09 09:58
