| Author |
Hybrid Camera Driver for W800i/K750 part 2 |
BLKSNAKER
Joined: Apr 22, 2006
Posts: 149
PM |
Quote:
|
On 2007-02-22 22:20:56, wizake wrote:
very nice pictures. I really like the colours and the sharpness. I decided to try it myself. I'm going on a short ski trip this weekend and I'll try it out.
You didnt put pictures taken at night .
I really like the way 8.53 takes night shots
does your driver has a super mode? a key combination or something?
or it just takes pictures?
|
|
It takes better day and night pictures than 8.53.....because 8.53 has the problem that it gest noiseless pics...but that costs not sharp at all pictures....and I know 8.53 has different modes...even a normal night mode....but 9.0 night mode beats all 8.53 night modes and adjustments. 9.0 driver always gets sharp pictures...and the noise is pretty low.
And 9.0 driver has no Super Mode...even though it beats 8.53 in all its possible modes and adjustments...and I know what I am talking about because I used 8.53 for a while...trying to get sharp noiseless pics...but it is almost imposible...and its normal night mode...is worse than 9.0 night mode. Cheers. |
|
|
BLKSNAKER
Joined: Apr 22, 2006
Posts: 149
PM |
Here you have low indoor and night outdoor pictures..
|
stingjoel
Joined: Jan 24, 2005
Posts: 265
From: Indonesia
PM |
@BLKSNAKER;
For low light, what's your camdriver setting? is it just turn on night mode or set the EV too? please advice 
Because I always get noise picture for low light indoor or outdoor...for daylight, I have no question...it's better than Zuza  |
vaziliz
Joined: Feb 22, 2007
Posts: 3
PM |
Quote:
|
On 2007-02-22 14:02:40, tranced wrote:
Quote:
|
could you please help me how could i find my CID ?
|
|
you need the davinici 13.7 to read your CID. google 13.7 and once you've downloaded it, open it then click Read CID/Test Cable tab and follow the instructions.
|
|
Hello again .....
my CID is 49 ... I didn't checked it with the davinci but with Phone XS |
Masoud57
Joined: Feb 12, 2007
Posts: 2
PM |
can i use this driver (9.0) with
k750-R1DB001-CID49
thanks.
[ This Message was edited by: Masoud57 on 2007-02-24 00:34 ] |
tranced
Joined: Jan 19, 2006
Posts: > 500
From: Santo Domingo, wonDeRland
PM |
@vaz: if so, the program you need is PHONE XS. i cant tell you how to use it as i have a cid36 phone. there's a topic regarding to this.
|
leojai
Joined: Feb 22, 2007
Posts: 1
PM |
I have installed 6.9 driver too. The focus speed is fast. The color is not bad. It is a good driver. I used 5.4 driver before. |
Rolle85
Joined: Feb 23, 2007
Posts: 10
From: Sweden
PM |
Hello! Can someone make a manual from the beginning in how to do this with what programs do I need, what file, where to click in program and so on please because I dont get a grip of this at all !
please |
charlie42
Joined: Jun 17, 2006
Posts: 8
From: czech republic
PM |
2 BLKSNAKER:
i think your photos were edited with some software - noise was reduced.. why is the date in the right bottom corner so blured? |
tranced
Joined: Jan 19, 2006
Posts: > 500
From: Santo Domingo, wonDeRland
PM |
because ESATO resizes the pics uploaded 
|
biasiman
Joined: Mar 27, 2006
Posts: 80
PM |
And also the date is always a bit blured even in original pics |
Badshah
Joined: Feb 20, 2007
Posts: 93
PM |
hey guys
can any expert look into this thread and help me out !!
http://www.esato.com/board/viewtopic.php?topic=142270
thanks in advance |
BLKSNAKER
Joined: Apr 22, 2006
Posts: 149
PM |
Quote:
|
On 2007-02-23 02:21:21, stingjoel wrote:
@BLKSNAKER;
For low light, what's your camdriver setting? is it just turn on night mode or set the EV too? please advice
Because I always get noise picture for low light indoor or outdoor...for daylight, I have no question...it's better than Zuza
|
|
In low light I just use night mode...it gets the sharpnness and almost doesnt get any noise..I jus adjust EV when light is too low...and to tell you the truth...I take many shots with some positive adjustments of EV and night mode on ( to get better focus and brightful pics in scenes which go from average to low light conditions) and the noise remains low.
here more samples...
-1.0 e.v.
-0.3 e.v.
0.0 e.v.
|
stingjoel
Joined: Jan 24, 2005
Posts: 265
From: Indonesia
PM |
@BLKSNAKER;
Just curious...what's your cellphone? is it W800i? or K750i with W800i firmware?
If the answer is "Yes"...then your driver is like ZUZA...good in W800i, but not good in K750i  |
wrecked_porsche
Joined: Jul 01, 2002
Posts: > 500
From: I'm not telling u !
PM, WWW
|
Yeah, previously I was using the stock R1BC002 driver.
I changed to 9.0 and now the pics have small little boxes in them. Happens in low light conditions @ daytime.
Pics also not as sharp.
I used cloudy and daylight WB.
Night shots have improoved somewhat though. Sharper and less noise + more brighter, and by that I mean objects that may have previously been in the dark can now be seen.
I'm using a k750i converted to w800 though.
IMHO, this is not suitable for k750 users unless they want better night shots.
Never argue with an idiot. They will drag you down to their level and beat you with experience.  I  Nokia N95 8GB and N82 |
|
|
Posted: 2007-02-23 01:16
jay0726 | 
