| Author |
Super camera driver for k750/w800/w810 |
pakraider
Joined: Jul 25, 2003
Posts: 313
PM |
On 2007-07-21 22:19:49, kopritis wrote:
I think but i'm not sure, Vertical lines is the refresh rate of camera module. 50Hz, 60Hz an the automode function. You can disable it from the driver...
[ This Message was edited by: kopritis on 2007-07-21 21:21 ]
Those usually show up as horizontal "beams" when there is flourescent light (thats why the 50Hz and 60Hz comes into play, depending on the frequency of the voltage in the light).. but I think people here are referring to seemingly random lines that show up especially in night modes.. on my W810 R4EA031 firmware I have never had this problem but have seen other phones exhibit this bug. It might be the camera sensor, I'm not sure.
moved on to the Nexus One..  needs a better Android  |
|
|
amarsidhu
Joined: Mar 09, 2004
Posts: 361
PM |
is there any easy way to change camdriver for the w810.
[addsig] |
pakraider
Joined: Jul 25, 2003
Posts: 313
PM |
On 2007-07-22 05:31:21, amarsidhu wrote:
is there any easy way to change camdriver for the w810.
you can use the customize_upgrade.xml shortcut trick ... here's a tutorial for it: http://forums.se-nse.net/index.php?showtopic=12232
moved on to the Nexus One.. needs a better Android |
amarsidhu
Joined: Mar 09, 2004
Posts: 361
PM |
thanks frnd
I have read somewhere a driver with sharpness 7
is this possible???
[addsig] |
whatsucka
Joined: Feb 17, 2007
Posts: > 500
PM, WWW
|
im starting to love Raiderski 6.4
i cant believe this driver can take these pics... although they are very noisy
door closed, totally no light at all except those grow in dark stars on my ceiling, i noe is very noisy but i can see the stars pretty bright
EV +0.7 set to max and night mode is on
this one have low noise but i can barely see the stars
EV +0.7 set to default and night mode is on
this one have low noise but i can still see the stars a bit
EV +0.3 set to 3.0, EV +0.7 set to max and night mode is on
|
whatsucka
Joined: Feb 17, 2007
Posts: > 500
PM, WWW
|
room with no light juz fone light and night mode
default settings
in restaurant
in my room
on bus
_________________
download PSP Stuff here
[ This Message was edited by: whatsucka on 2007-07-22 08:17 ] |
amarsidhu
Joined: Mar 09, 2004
Posts: 361
PM |
this is a good driver
but low light pics without night mode or phone light has a lot of noise.
[addsig] |
Raiderski
Joined: Jul 03, 2006
Posts: > 500
From: Poland, Hell, Mountains
PM, WWW
|
amarsidhu
not for me  it's only matter of using EM for satisfying result. standard EM noise level isn't higher than other drivers have and when using manual shutter & exposure control noise can be full minimized (ISO100) even on extremely wrong light conditions
|
radicalgel
Joined: Oct 06, 2006
Posts: 98
PM, WWW
|
@Raider
Hey how do you set ISO level in your driver. Is there a way to mod it so that i can have the ISO set at 80 all the time for my w810?
-----------------------------------------------
http://www.flickr.com/photos/radicalgel/ |
pimppenner
Joined: Mar 01, 2007
Posts: 2
PM |
@ Sarmad
Hey Sarmad! Im using your cam driver with SPOT for some time now and am still reading older posts within this thread to get to know the driver and its functions better. Im confused about one thing; the NORMAL and the FINE mode - you once mentioned that in FINE mode the SPOT function is activated, in NORMAL its not, then again you say NORMAL and FINE are just different in exposure time. What does relate to which driver version (SPOT driver or no SPOT driver)?
Do you have a complete manual for the SPOT driver?
One further question: When Im in MACRO mode and INFINITY zoom (MACRO + 1.1) and Im pressing the shutter half it focuses, the rectangle becomes green and when I then release the shutter only the part which was in the rectangle is displayed. I can adjust the sharpness with the ZOOM keys. When I hen press the shutter again fully it is taking the picture.
Is that a normal behaviour?
My phone is a k750i, CID 36, R1CA021 - would there be have any advantage to upgrade it to a w800 in terms of camera driver? Might the quality be better then or colours or whatever?
Regards, pimpenner |
pakraider
Joined: Jul 25, 2003
Posts: 313
PM |
On 2007-07-22 15:21:27, pimppenner wrote:
@ Sarmad
Hey Sarmad! Im using your cam driver with SPOT for some time now and am still reading older posts within this thread to get to know the driver and its functions better. Im confused about one thing; the NORMAL and the FINE mode - you once mentioned that in FINE mode the SPOT function is activated, in NORMAL its not, then again you say NORMAL and FINE are just different in exposure time. What does relate to which driver version (SPOT driver or no SPOT driver)?
Do you have a complete manual for the SPOT driver?
One further question: When Im in MACRO mode and INFINITY zoom (MACRO + 1.1) and Im pressing the shutter half it focuses, the rectangle becomes green and when I then release the shutter only the part which was in the rectangle is displayed. I can adjust the sharpness with the ZOOM keys. When I hen press the shutter again fully it is taking the picture.
Is that a normal behaviour?
My phone is a k750i, CID 36, R1CA021 - would there be have any advantage to upgrade it to a w800 in terms of camera driver? Might the quality be better then or colours or whatever?
Regards, pimpenner
I really really regret making the Spot Photometry driver now since I think most people don't know what its for.. not pointing fingers at you, but just overall I get a lot of questions about it.
Spot Photometry is a VERY special case where you only want to use the center of the image for the purpose of adjusting exposure.. there are very few times that you would actually need to do this, and I don't support it anymore. Fine mode turns Spot on, and Normal turns it off if I remember correctly, but I do not recommend you use the Spot version of the driver, use the regular one.
When macro mode is on, and you tap the shutter half way, then you get a Zoom Preview that lets you adjust the focus until it's just right.. (the zoom keys in Macro mode adjust the focus). This is normal but only needed if you really need to fine-tune the focus. In most cases, you can use Autofocus or use the zoom keys to adjust the manual focus from the regular preview image.
As for your phone... I envy you for having a k750 CID36.
moved on to the Nexus One.. needs a better Android |
pimppenner
Joined: Mar 01, 2007
Posts: 2
PM |
hahaha ) thanks for complimenting my phone and thanks a lot for your reply!
I read some stuff about photometry and I noticed that most of the newer camera phones have this feature included or at least support it, too. That is why I came to the conclusion the SPOT function could be needful to take nice pictures more easily.
Especially this sample pictures (down at METERING) gave me the impression SPOT is helpful to take well lit pictures. But I think I will go for your advice and use the standard driver.
Greetings, pimppenner |
pram_zx
Joined: Mar 02, 2007
Posts: 161
From: NoWhere Island
PM |
@All who use SPU driver
Im now trying SPU drivers. this driver is good. but I dont know how to take picture with low noise in this driver. Im use the supermode and change the iso to 1.1 and increase the shutter speed 1.7, but the picture that Im taken is still have a noise and overexposure. How do you guys take night shot with SPU driver with low noise?
teach me please...what is your details setting?
W810i Black with W800 back cover, modded camdriver, Own mix acoustic driver, Unbranded phone, Adding new flash menu's. W810i It's Rock...! |
massgeorge
Joined: Mar 15, 2007
Posts: 25
PM |
@pram_zx
To take low noise pics with SPU's driver in night mode first set the ISO to 100 (zoom 1.1) then set the AE lock ( starting at EV 0.0; right to +03,left to 0.0, right +03, left 0.0.) There should be a slight pause after the last left to let you know it's activated) After the AE lock is on set the Shutter speed with EV -1.0.
to remove the AE lock repeat the sequence or turn the camera,not the phone  ,off then on
It's a quick explanation, sorry if it not clear
Rogers network black w810i |
Badshah
Joined: Feb 20, 2007
Posts: 93
PM |
327 pages to read :faint:
I have k750i CID36
can somebody post a small summory about the drivers which have been updated so far...
I know all the drivers are best at their own ... but I want to select on for a long time and then try next one rather than changing so many drivers (OMG, there are so many)
can sombody help and reply something
Thanks in advance |
|
|
Posted: 2007-07-22 01:12
needs a better Android 
