Esato

Forum > Sony Ericsson / Sony > Software, Firmware and Drivers > Super camera driver for k750/w800/w810

Visitors browsing this topic: 2
Add to Bookmarks
Previous  123 ... 318319320 ... 664665666  Next
Author Super camera driver for k750/w800/w810
nabelon
K750
Joined: Jun 30, 2007
Posts: 16
PM
Posted: 2007-07-13 12:11
Reply with quoteEdit/Delete This PostPrint this post

On 2007-07-13 10:13:33, Overkill wrote:
I have a normal retail w810i (i.e original from sony, unbranded) - i have a few questions about these cam drivers:

1)I have to use the CID 36 R1CA021 version right?- My software version is:
CXC1250316
R4EA031
This means my phone is CID 36 right?

2)Should i use XS++ or PhoneXS to install this driver?

3)If i backup my original camdriver , then by putting it back on and deleting this one, i can get my cam exactly the way it was if i want right?


[ This Message was edited by: Overkill on 2007-07-13 09:16 ]


1.Nope ur not using a CID36 coz all W810 is CID 49.

2.XS++

3.Yeah you could restore everything back to normal.

I'm not using w810 and i don't know too much bout the phone.But i guess you could ask around here and also drop by se-nse forum to get more info on how to replace camdriver the easy way.
murz2005
T68 gold
Joined: May 02, 2007
Posts: 9
PM
Posted: 2007-07-13 12:19
Reply with quoteEdit/Delete This PostPrint this post

On 2007-07-13 08:39:05, shouhei wrote:
Haha Aaron Kwok!

Anyway EM is still not on in the pic...

Are you using the driver I posted? All you need to do is open camera and shoot! and EM will be on..no need to change any settings!


How do you know from the pic EM is present or not? Anyway, I rolled back to 21.91. In 6.4 with EM alwais ON ISO hardly ever gets more than 125. It s very good because of little colour noise, but gives longer exposures in bad light condition which is not so good ).
lord_kin0
W810 black
Joined: Feb 21, 2007
Posts: 35
From: Romania
PM
Posted: 2007-07-13 12:29
Reply with quoteEdit/Delete This PostPrint this post

On 2007-07-13 10:13:33, Overkill wrote:
I have a normal retail w810i (i.e original from sony, unbranded) - i have a few questions about these cam drivers:

1)I have to use the CID 36 R1CA021 version right?- My software version is:
CXC1250316
R4EA031
This means my phone is CID 36 right?

2)Should i use XS++ or PhoneXS to install this driver?

3)If i backup my original camdriver , then by putting it back on and deleting this one, i can get my cam exactly the way it was if i want right?


[ This Message was edited by: Overkill on 2007-07-13 09:16 ]


your phone is CID49 for sure. You have a link below, follow that tutorial and if you say that your phone is debranded, it should be easy to change your camdriver and other things too.

Of course, it's wise to backup all your original files, and yes, if you change the camdriver back, your camera will be exactly the way it was before.


http://forums.se-nse.net/index.php?showtopic=7330

R4EA031
shouhei
K810 Blue
Joined: Apr 28, 2007
Posts: 66
PM
Posted: 2007-07-13 13:13
Reply with quoteEdit/Delete This PostPrint this post

On 2007-07-13 12:19:37, murz2005 wrote:

On 2007-07-13 08:39:05, shouhei wrote:
Haha Aaron Kwok!

Anyway EM is still not on in the pic...

Are you using the driver I posted? All you need to do is open camera and shoot! and EM will be on..no need to change any settings!


How do you know from the pic EM is present or not? Anyway, I rolled back to 21.91. In 6.4 with EM alwais ON ISO hardly ever gets more than 125. It s very good because of little colour noise, but gives longer exposures in bad light condition which is not so good ).


there shouldn't be any difference between 21.91 and 6.4 according to Raider...

How to tell EM is on? Just take pics in low light with and without EM and you will see the difference
murz2005
T68 gold
Joined: May 02, 2007
Posts: 9
PM
Posted: 2007-07-13 13:26
Reply with quoteEdit/Delete This PostPrint this post

On 2007-07-13 13:13:43, shouhei wrote:

On 2007-07-13 12:19:37, murz2005 wrote:

On 2007-07-13 08:39:05, shouhei wrote:
Haha Aaron Kwok!

Anyway EM is still not on in the pic...

Are you using the driver I posted? All you need to do is open camera and shoot! and EM will be on..no need to change any settings!


How do you know from the pic EM is present or not? Anyway, I rolled back to 21.91. In 6.4 with EM alwais ON ISO hardly ever gets more than 125. It s very good because of little colour noise, but gives longer exposures in bad light condition which is not so good ).


there shouldn't be any difference between 21.91 and 6.4 according to Raider...

How to tell EM is on? Just take pics in low light with and without EM and you will see the difference


There IS difference, especially if with EM ON you are trying to shoot something in low light, because if you (not meaning YOU ) have shaky hands it is impossible to get steady pictures.
shouhei
K810 Blue
Joined: Apr 28, 2007
Posts: 66
PM
Posted: 2007-07-13 13:41
Reply with quoteEdit/Delete This PostPrint this post
Sorry I meant there wasn't any difference between both drivers in EM mode..

If you want EM and a quick shot then you will just have to use a real camera

I haven't seen any drivers that can take QUICK low to no noise pictures in low light...

mursay
T68 gold
Joined: Jun 08, 2007
Posts: 18
PM
Posted: 2007-07-13 13:45
Reply with quoteEdit/Delete This PostPrint this post

Hi. I want 21.91 driver pls. can u help me?
murz2005
T68 gold
Joined: May 02, 2007
Posts: 9
PM
Posted: 2007-07-13 14:06
Reply with quoteEdit/Delete This PostPrint this post

On 2007-07-13 13:41:37, shouhei wrote:
Sorry I meant there wasn't any difference between both drivers in EM mode..

If you want EM and a quick shot then you will just have to use a real camera

I haven't seen any drivers that can take QUICK low to no noise pictures in low light...




For good pictures I already have a digital camera
Just want to get decent pictures with my 810. I already tested a lot of drivers but perfection has no limits and I still searching for the best driver
Still, I change drivers very often
Randolph
K750
Joined: May 21, 2007
Posts: 115
PM
Posted: 2007-07-13 14:13
Reply with quoteEdit/Delete This PostPrint this post
Here some Pics shot with K750 r1db001 CID49 with CID36 cam module.
All done with Sarmadīs 5.7 Photometry support sharpness 5 normal quality macro on, focus infinite:









lengstreet
K770 Beige
Joined: Apr 18, 2007
Posts: 92
From: Thailand
PM
Posted: 2007-07-13 14:29
Reply with quoteEdit/Delete This PostPrint this post
@Randolph
Some Noise But Nice Pics!

_________________
http://www.flickr.com/photos/lengstreet

[ This Message was edited by: lengstreet on 2007-07-13 13:29 ]
Overkill
W810 black
Joined: Jul 13, 2007
Posts: 15
PM
Posted: 2007-07-13 16:42
Reply with quoteEdit/Delete This PostPrint this post
So which is better, these drivers or Sarmad's drivers..
If sarmad's is better, what is the latest version and where can i get them?

Thanks for all the help on my previous post guys

Also, which is a good acoustic driver to use? Do they make much of a difference?

Oh yeah.... What exactly do flash menus do??

And.... any other mods that are really worthwhile for my phone besides cam driver and acoustic?

After this stuff is replied to, ill be ready to flash my phone with a cam driver, and maybe some other stuff(like acoustic drivers and flash menus)

[ This Message was edited by: Overkill on 2007-07-13 15:52 ]
lord_kin0
W810 black
Joined: Feb 21, 2007
Posts: 35
From: Romania
PM
Posted: 2007-07-13 18:16
Reply with quoteEdit/Delete This PostPrint this post

On 2007-07-13 16:42:19, Overkill wrote:
So which is better, these drivers or Sarmad's drivers..
If sarmad's is better, what is the latest version and where can i get them?

Thanks for all the help on my previous post guys

Also, which is a good acoustic driver to use? Do they make much of a difference?

Oh yeah.... What exactly do flash menus do??

And.... any other mods that are really worthwhile for my phone besides cam driver and acoustic?

After this stuff is replied to, ill be ready to flash my phone with a cam driver, and maybe some other stuff(like acoustic drivers and flash menus)

[ This Message was edited by: Overkill on 2007-07-13 15:52 ]



hey, don't you want me to customize your phone for you?

http://www.4shared.com/networ[....]searchmode=2&searchName=sarmad - Sarmad's drivers
R4EA031
lord_kin0
W810 black
Joined: Feb 21, 2007
Posts: 35
From: Romania
PM
Posted: 2007-07-13 18:30
Reply with quoteEdit/Delete This PostPrint this post
Sorry for the offtopic, but is there any k750 R1db001 user around here? i just want the original acoustic pack for this firmware... sefstool doesn't work on k750 firmwares and i can't find it anywhere.

it would be much appreciated...
R4EA031
ptkstep
K790
Joined: May 28, 2007
Posts: 52
PM
Posted: 2007-07-13 18:54
Reply with quoteEdit/Delete This PostPrint this post
@Overkill & All
If you want to find acoustic pack for your se phone, try Black Ice WoW II acoustic's pack. I think his acoustic is the best one for me. ^_^

http://forums.se-nse.net/index.php?showtopic=9628

Sorry for off topic.

[ This Message was edited by: ptkstep on 2007-07-13 17:56 ]
lengstreet
K770 Beige
Joined: Apr 18, 2007
Posts: 92
From: Thailand
PM
Posted: 2007-07-14 02:45
Reply with quoteEdit/Delete This PostPrint this post

On 2007-07-13 18:54:37, ptkstep wrote:
@Overkill & All
If you want to find acoustic pack for your se phone, try Black Ice WoW II acoustic's pack. I think his acoustic is the best one for me. ^_^

http://forums.se-nse.net/index.php?showtopic=9628

Sorry for off topic.

[ This Message was edited by: ptkstep on 2007-07-13 17:56 ]


@All
BLK Ice acoustic it's better for k750i w800i 'n w810i Cheer!!
i still in wowII on my k750i phone i really love it.

Sorry for off topic too

_________________
http://www.flickr.com/photos/lengstreet

[ This Message was edited by: lengstreet on 2007-07-14 12:01 ]
Access the forum with a mobile phone via esato.mobi
Previous  123 ... 318319320 ... 664665666  Next
Goto page:
Lock this Topic Move this Topic Delete this Topic