| Author |
K750 / W800 Firmware Overview |
zeus_hunt
Joined: Nov 09, 2005
Posts: 8
PM |
I recently changed my motherboard...
I had MSI ATI X200 chipset...and had Invalid Parameter iss after upgrade to 008...
I recently a Gigabyte nvidia 430 geforce 6100 mboard
And the iss with Invalid Parameter is gone...
So it is an iss which also conserns the mboard.. and the firmware update |
|
|
Dan_Aykroyd
Joined: Sep 13, 2005
Posts: > 500
PM |
Once again...please someone; how can I know which version will be flashed to my phone using SEUS II? Do I get a chance to pull out the cable (like on SEUS I the unplug-plug.with.C.button) to check the files downloaded?
Thanks.
|
rockygali
Joined: Nov 21, 2005
Posts: > 500
From:
PM, WWW
|
Dan it all depends on what version is available for your current firmware.
SEUS II decides which files to flash on your fon... perhaps the newer one in its server taht fits your fon's CID stuff like that... SEUS II can evaluate all of these.
and about the unplug-plug thing... uummm havent tried it in SEUS I, and i know i dont need to do it in SEUS II either. i have probs with SEUS I before so i didnt bother to go on updating further via that service, so i choosed Davinci. then after awhile tried updating SEUS II the very first time it became available and luckily my update went thru without a glitch.
_________________
"only those who will risk going too far can possibly find out how far they can go..."
[ This Message was edited by: rockygali on 2006-01-19 01:41 ] |
mongoose3800
Joined: Nov 29, 2005
Posts: 416
From: Australia
PM |
To zeus_hunt - I doubt the parameter incorrect will be chipset specific. I can dupicate the problem on 3 different computers with 3 different chipsets (intel, sis and Via) regardless of USB1 or USB2. Being an unpredictable error it will probably come and bite you again just when you think it is gone.
|
rockygali
Joined: Nov 21, 2005
Posts: > 500
From:
PM, WWW
|
yes i think i believe mongoose...
this invalid parameter thing just shoots whenever it wants to without warning even tho you know you had a good setting for the phone and your PC. its prolly a bug which has sumthing to do with interrupts? with port communications.. what do you think?!
"Darkness is the absence of light.. and not the opposite..." |
babakgh
Joined: Jan 19, 2006
Posts: 6
PM |
hi all,
my k750 firmware is r1l002 and i am using latest seus but it says "you have the latest version and no need to upgrade"
why ? |
Dan_Aykroyd
Joined: Sep 13, 2005
Posts: > 500
PM |
I know that SEUS will update to my CDA but, what I meant is if I can CHECK for the files downloaded before it flashes them. That's why I asked if there is a pause between downloading and flashing where I would have to re-plug the phones, so I could go and check the files for their version. This is cause I don't want to go from R1L... to R1N... instead I'd like to go to R!A..
Easy question... 
|
chowkb
Joined: Dec 04, 2005
Posts: 40
PM |
Quote:
|
On 2006-01-19 11:25:05, rockygali wrote:
yes i think i believe mongoose...
this invalid parameter thing just shoots whenever it wants to without warning even tho you know you had a good setting for the phone and your PC. its prolly a bug which has sumthing to do with interrupts? with port communications.. what do you think?!
|
|
I think they should rollback to the R1L version of the file transfer (USB) function and be done with it (Assuming the functions are modular). I believe I had no problems in R1L for my W800i after transfering zillions of times =P |
mr_wizard
Joined: Jul 03, 2003
Posts: 32
From: Stockport, England
PM |
Does any one know if there is new software for o2 users? I an on R1AA008 and just checked the Update service and it started downloading new software. I stopped it cos I wasnt sure what software was going to go on. I thought I would have got a message saying I was up-to date? |
new666
Joined: Dec 28, 2005
Posts: 33
From: USA
PM |
@babakgh
Use Davinci team's client to check the color of your phone... if it is Brown SEUS will NOT upgrade it and you'll have to use DaVinci to flash and/or change you CID. |
faultymonkey
Joined: Sep 17, 2005
Posts: 29
PM |
Ok bit of a sticky here...
I recently upgraded my phone to R1N035 using SEUS and everything is fine. But I now need to upgrade to R1AA008. I've tryed to upgrade like I did before and it seems to do it but when it has finished I check the software version and it is still R1N035. I have the latest SEUS (i think) on the installation package it says 2.2.11b but once installed the program itself says 2.2.12.2 ....huh? My phone still works perfectly but I was just wanting to get the newest stuff.
Any help would be great! |
Hesky
Joined: Oct 23, 2005
Posts: 101
From: England
PM |
@ faultymonkey
1.The install package you have is 2.2.11b, but the program automaticly updates it's self to the latest version on launching it. (currently 2.2.12.2). SE have just not updated all the links on there site (selecting different phone models shows different software versions)
2. The program no longer tells you if you have the current firmware version. It will just download the one you already have and install it again if no newer one is available.
[ This Message was edited by: Hesky on 2006-01-19 19:00 ] |
faultymonkey
Joined: Sep 17, 2005
Posts: 29
PM |
So how would i get the newest version (R1N008)? |
Dan_Aykroyd
Joined: Sep 13, 2005
Posts: > 500
PM |
You'll have to wait it get approved for your operator... |
babakgh
Joined: Jan 19, 2006
Posts: 6
PM |
Quote:
|
On 2006-01-19 17:00:56, new666 wrote:
@babakgh
Use Davinci team's client to check the color of your phone... if it is Brown SEUS will NOT upgrade it and you'll have to use DaVinci to flash and/or change you CID.
|
|
checking with davinci, mine is red ... . still confused |
|
|
Posted: 2006-01-18 22:32
