| Author |
K800 Firmware Overview |
deadman4168
Joined: Jul 24, 2007
Posts: 64
PM |
I just updated the firmware of my K800i to the newest R8BF003 CID 52.
I used:
-MAIN: K800_R8BF003_MAIN_GENERIC_WI_RED52.mbn
but i didnt update the FS..
now i dont get the 123 option when pressing # while writing a message...
any suggestions |
|
|
centur
Joined: Jun 10, 2007
Posts: > 500
From: Bulgaria
PM, WWW
|
On 2008-07-25 09:47:21, deadman4168 wrote:
I just updated the firmware of my K800i to the newest R8BF003 CID 52.
I used:
-MAIN: K800_R8BF003_MAIN_GENERIC_WI_RED52.mbn
but i didnt update the FS..
now i dont get the 123 option when pressing # while writing a message...
any suggestions
Menu > Settings > General > Language > Writing language > mark all then click Save
|
cocico
Joined: Jun 06, 2008
Posts: 2
PM |
On 2008-06-20 21:21:11, Earect wrote:
I just updated the firmware of my K800i to the newest R8BF003 CID 52.
I used:
-MAIN: K800_R8BF003_MAIN_GENERIC_WI_RED52.mbn
-FS: K800_R8BF003_FS_S_E_EUROPE_RED52.fbn
-The finalization was done by xs++ (europe 3).
The problem is that I don't have the Dutch language anymore...
Therefore I need Europe 3 or better the Belgium-version.
(See this site: http://www.wotanserver.com/en[....]e-r8bf003-cid52-languages.html
==> Generic Trade Belgium
Languages: English, Dutch, French, German
T9: English, Dutch, French, German
or
==> Generic Europe 3
Languages: English, Dutch, French, German
T9: English, Dutch, French, German )
Does anbody know where to find these? I searced at sek750i and iprotebe, but there are only central europe files...
It may also be an older firmware version. I would appreciate it! Thanks in advance.
Has someone found that firmware with Dutch included? I still run R1ED001 and I'd like to update my K800i Allure Brown  |
thefabie
Joined: Mar 08, 2008
Posts: 83
From: Malaysia
PM, WWW
|
what generic n firmware should i choose.. i want to upgrade my phone k800i to k810 > what language
12:17:42| Baseband ID: 9900
12:17:42| Protocol Version: 3.1
12:17:42| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:K800)
12:17:42| ...using GDFS name
12:17:42|
12:17:42| Profiling SEMC phone...
12:17:42| Platform: DB2020
12:17:42| OTP CID: 51
12:17:42| EROM CID: 53
12:17:42| EROM Color: Red
12:17:42| IMEI: 35427102xxxxxx
12:17:42| Phone ID: K800
12:17:42| Region: APAC
12:17:42| CDA: CDA102568/101 R8A
12:17:42| Firmware Version: R8BF003
12:17:42| EROM: R3A022
---------------- |
niklovely
Joined: Dec 15, 2007
Posts: 16
From: India
PM |
I just wanted to remove java security as well as be able to apply some patches..
do i need to upgrade my firmware. i am using k800i r1je001 of 3 network australia unlocked.(using in india)
i really want patch that removes sms delivery report after 5 seconds..
is it available on my firmware too or i should upgrade.
( i have downloaded r8bf003 from link posted in previous page..)
please suggest. |
reggaedave
Joined: Nov 27, 2008
Posts: 82
PM |
Bin around a bit but not really posted b4.I have the old faithful k800i db2020 cid 53, still no firmware out an about yet? is that still the case....Will have to just stick to the old little far manager drag an drop style for now.mite as well go an by an iphone an mod away at this rate!!! RGA.
|
Earect
Joined: Oct 12, 2006
Posts: 3
PM |
I use XS++ to finalize my K800i. I flash it with "custpack" Europe 3. Europe 3 is the UK, Belgium, France, ... but when I want to change my language for the phone and writing, I only have English (for the phone) and some Central European languages (writing).
I used the Central Europe firmware, so I know why this is so.
But what is the point of the finalization, the flashing??? I want the Dutch language (for writing)!! |
Amos Bernar
Joined: Dec 23, 2008
Posts: 2
PM |
i have the drivers for xp but does not work and need the k800 sony ericsson for windows vista unless someone knows another way to transfer my photos from the phone please tell me?
_________________
Cosmetic dentist in Southampton
[ This Message was edited by: Amos Bernar on 2009-04-22 07:21 ] |
sathurn
Joined: Mar 24, 2003
Posts: 13
PM |
hi guys...anyone has got K800 - R8BF003 FS EUROPE 5 - RED52....i need italian language....thank you |
geminixx
Joined: Mar 15, 2008
Posts: 16
From: jamaica
PM, WWW
|
How can i get it? Im in Jamaica, dont have a credit card and SEUS telling me i have the latest firmware (RIED001) My games and applications arnt opening..... |
msyarif
Joined: Aug 25, 2009
Posts: 1
PM |
hi guys.... i love this thread.
after upgrade my firmware to R8BF003, successfull. after 3 month, anyway now... i have problem, suddenly my k800i said "no access to network" ... with icon "no call" on side of signal bar.
1. i try to switch off and on .. nothing happen
2. i try to remove baterry for while , nothing happen.
need guidences or support here...
thanks
Syarif |
suresh86
Joined: Jun 22, 2008
Posts: 201
From: Kathmandu,Nepal
PM, WWW
|
Change sim card and see if that helps, otherwise you can reset settings of the phone. |
shmm6991
Joined: Jan 27, 2010
Posts: 2
PM |
Hi everyone!
Let me start by saying that I am new to this forum. I have a problem with my SE K800i because it always gets a white screen and then reboot with it disconnected for few seconds and it happens every 5 seconds. I have my K800i about 1 years already in the closet because my SE phone sent back to me by SE and they told me it is "repaired" but it is not repaired.
Now I have tried everything to repair it but no luck.
Can someone make a special little mini-tut about how my SE k800i can get working again?
Now every time I get to read at XS++
20:21:37 | TURN OFF PHONE!
20:21:37 | Hold 'C' button on phone and connect phone NOW.
20:21:37 | You have 30 seconds ...
20:21:37 |
20:21:40 | Baseband ID: 9900
20:21:40 | Protocol Version: 3.1
20:21:40 | Warning: IMEI name does not match gdfs name (IMEI: K800 gdfs: K810)
20:21:40 | ... using IMEI name
20:21:41 |
20:21:41 | Profiling SEMC phone ...
20:21:41 | Platform: DB2020
20:21:41 | OTP CID: 49
20:21:41 | EROM CID: 53
20:21:41 | EROM Color: Red
20:21:41 | IMEI: 35570401xxxxxx
20:21:41 | Phone ID: K800
20:21:41 | Region: EUROPE_4
20:21:41 | CDA: CDA102779/78 R7A
20:21:41 | Firmware Version: R8BA024
20:21:41 | EROM: R3A022
20:21:41 | Ready for operation!
But every time I want to update R8BF003 RED 53 will I read
20:22:23 | TURN OFF PHONE!
20:22:23 | Hold 'C' button on phone and connect phone NOW.
20:22:23 | You have 30 seconds ...
20:22:23 |
20:22:26 | Baseband ID: 9900
20:22:26 | Protocol Version: 3.1
20:22:26 | Warning: IMEI name does not match gdfs name (IMEI: K800 gdfs: K810)
20:22:26 | ... using IMEI name
20:22:26 |
20:22:26 | Profiling SEMC phone ...
20:22:26 | Platform: DB2020
20:22:26 | OTP CID: 49
20:22:26 | EROM CID: 53
20:22:26 | EROM Color: Red
20:22:26 | IMEI: 35570401xxxxxx
20:22:26 | Phone ID: K800
20:22:26 | Region: EUROPE_4
20:22:26 | CDA: CDA102779/78 R7A
20:22:26 | Firmware Version: R8BA024
20:22:26 | EROM: R3A022
20:22:26 | Ready for operation!
20:22:29 | Sorry, your phone is NOT SUPPORTED
20:22:29 | Error: Can not send flash loader
20:22:29 | Error: Flashing failed
20:22:31 | Disconnected ... Unplug the phone
I know it's an old phone, but i just love the looks of it... can someone help me out? i would be really happy for it...
Mini-tut like what firmwares i need, where can i download it en with what can i install it.........
THANNNKKKKSSSS!!!! |
centur
Joined: Jun 10, 2007
Posts: > 500
From: Bulgaria
PM, WWW
|
On 2010-01-27 20:26:25, shmm6991 wrote:
Hi everyone!
Let me start by saying that I am new to this forum. I have a problem with my SE K800i because it always gets a white screen and then reboot with it disconnected for few seconds and it happens every 5 seconds. I have my K800i about 1 years already in the closet because my SE phone sent back to me by SE and they told me it is "repaired" but it is not repaired.
Now I have tried everything to repair it but no luck.
Can someone make a special little mini-tut about how my SE k800i can get working again?
Now every time I get to read at XS++
20:21:37 | TURN OFF PHONE!
20:21:37 | Hold 'C' button on phone and connect phone NOW.
20:21:37 | You have 30 seconds ...
20:21:37 |
20:21:40 | Baseband ID: 9900
20:21:40 | Protocol Version: 3.1
20:21:40 | Warning: IMEI name does not match gdfs name (IMEI: K800 gdfs: K810)
20:21:40 | ... using IMEI name
20:21:41 |
20:21:41 | Profiling SEMC phone ...
20:21:41 | Platform: DB2020
20:21:41 | OTP CID: 49
20:21:41 | EROM CID: 53
20:21:41 | EROM Color: Red
20:21:41 | IMEI: 35570401xxxxxx
20:21:41 | Phone ID: K800
20:21:41 | Region: EUROPE_4
20:21:41 | CDA: CDA102779/78 R7A
20:21:41 | Firmware Version: R8BA024
20:21:41 | EROM: R3A022
20:21:41 | Ready for operation!
But every time I want to update R8BF003 RED 53 will I read
20:22:23 | TURN OFF PHONE!
20:22:23 | Hold 'C' button on phone and connect phone NOW.
20:22:23 | You have 30 seconds ...
20:22:23 |
20:22:26 | Baseband ID: 9900
20:22:26 | Protocol Version: 3.1
20:22:26 | Warning: IMEI name does not match gdfs name (IMEI: K800 gdfs: K810)
20:22:26 | ... using IMEI name
20:22:26 |
20:22:26 | Profiling SEMC phone ...
20:22:26 | Platform: DB2020
20:22:26 | OTP CID: 49
20:22:26 | EROM CID: 53
20:22:26 | EROM Color: Red
20:22:26 | IMEI: 35570401xxxxxx
20:22:26 | Phone ID: K800
20:22:26 | Region: EUROPE_4
20:22:26 | CDA: CDA102779/78 R7A
20:22:26 | Firmware Version: R8BA024
20:22:26 | EROM: R3A022
20:22:26 | Ready for operation!
20:22:29 | Sorry, your phone is NOT SUPPORTED
20:22:29 | Error: Can not send flash loader
20:22:29 | Error: Flashing failed
20:22:31 | Disconnected ... Unplug the phone
I know it's an old phone, but i just love the looks of it... can someone help me out? i would be really happy for it...
Mini-tut like what firmwares i need, where can i download it en with what can i install it.........
THANNNKKKKSSSS!!!!
Read here: http://www.esato.com/board/viewtopic.php?topic=170737 and use these files:
K800_R8BF003_MAIN_GENERIC_WI_RED53
K800_R8BF003_FS_EUROPE_4_RED53
HB1-06_Generic_CDA102568_13_R4A_GENERIC_EUROPE_4
Firmware can download from here: http://www.esato.com/board/viewtopic.php?topic=193451#post2891032
[ This Message was edited by: centur on 2010-01-27 20:06 ] |
shmm6991
Joined: Jan 27, 2010
Posts: 2
PM |
Thank you for your fast replay, sorry for my late replay ..
I will try this as soon as possible and will replay to this forum again!
But thank you very much for the help!
edit*
centur:
Thank you for you great help!
I have the K810 firmware and my white screen+restart problem is solved! 
Thank you 1000 times!
Cheers
Edit 2*
Nevermind ...  white screen + restart is still the problem .. .:S
[ This Message was edited by: shmm6991 on 2010-02-06 21:42 ] |
|
|
Posted: 2008-07-25 09:47
