| Author |
Hybrid Camera Driver for W800i/K750 |
Magicnet2
Joined: Nov 13, 2006
Posts: 59
From: Slovakia
PM |
@gprsman
All right. After a little time thinking about the SETool and so, I decided to try it with this. So if you are still in the mood of guiding me through the SETools scripts to change the camdriver, it would be SOOOOOOOOOOO gooood. 
Wanna try the ZUZA 2 driver. Quite keen on the photos. |
|
|
DarkChild
Joined: Sep 25, 2005
Posts: 68
PM |
Zuza 3 has the same compression as Zuza or Zuza 2? |
gxg
Joined: Nov 11, 2005
Posts: 270
From: Romania
PM |
You force me to be rought!
@ DARK
DID I MENTION ANYTHING IN CHANGES ?
CAN YOU QUOTE 1 of MY POST WHERE I SAY THAT ZUZA 3 HAVE OTHER COMPRESION?
CAN YOU READ AGAIN FROM PAGE 298 TO 301 TO FIGURE IT OUT?
CAN YOU SEE THAT I WROTE ONLY " Fps Improved"?
PLease, but PLease... reply and tell me... because... if another hurry poster read also in hurry .. I have to anwer to 20 questions similar to yours..
AND WRILY IS NOT THE CASE !!!!!!!!!!!!!!!
I have the bad habbit to anounce the changes.... so read man.. don't hunt gor drivers and then ask questions.
PLeaase man.. will all respect: READ CAREFOUL!! PAY ATENTION!!! |
gprsman
Joined: Aug 28, 2006
Posts: 269
PM |
Quote:
|
On 2006-11-17 06:05:17, Magicnet2 wrote:
@gprsman
All right. After a little time thinking about the SETool and so, I decided to try it with this. So if you are still in the mood of guiding me through the SETools scripts to change the camdriver, it would be SOOOOOOOOOOO gooood.
Wanna try the ZUZA 2 driver. Quite keen on the photos.
|
|
Excuse my english I have made the translation with my guide the Italian are of haste, only SEtool to us + dongle:
Guide scripts SEtool:
all it is made through script and acting within the file system, obviously it wants the new one camdriver0.dat modified, you to us of are many I I put those heads from me We begin first step backup of the camdriver0.dat that later on we will eliminate. To execute all the scripts in txt putting in misc file and click write script, the read to end in the directory ph_out within the SEtool.
chdir:/ifs/settings/camera/ listfiles:
readfile:camdriver0.dat
readfile camdriver0.dat Hour we remove from directory ph_out the camdriver0.dat read and save it elsewhere. Hour we eliminate the camdriver0.dat from the telephone with this script:
chdir:/ifs/settings/camera/ listfiles:
deletefile: camdriver0.dat
Hour we put in directory ph_out within the modified new SEtool the camdriver rename camdriver0.dat (as it originates it them) Last step we go to write the camdriver0.dat with this script:
wrfile: ph_out camdriver0.dat, /ifs/settings/camera/camdriver0.dat
[ This Message was edited by: gprsman on 2006-11-17 07:37 ]
[ This Message was edited by: gprsman on 2006-11-17 07:40 ] |
G-Izzat
Joined: Nov 15, 2006
Posts: 482
From: MY
PM |
darkchild,
this is the changes in zuza 3 - viewfinder fps improved.
gxg,cool down,man.
woozah. |
2uk3y
Joined: Jul 12, 2006
Posts: 214
From: Visit Malaysia 2007
PM |
Quote:
|
On 2006-11-17 08:34:46, G-Izzat wrote:
darkchild,
this is the changes in zuza 3 - viewfinder fps improved.
gxg,cool down,man.
woozah.
|
|
ur name look familiar la hehehehe  
  800i R1BC002 |
jiji
Joined: Nov 04, 2006
Posts: 30
PM |
gprsman i don't want to offend you or something.. but.... can you discuss the Dongle in private or on another thread ?
And my advice to the Daring man who have dongle is that to buy or lend a service cable. An debranding or any other operation SE tool will never work over Blue Tooth or something.. EXCEPT service cable. 
If you allowed me... can you move the discusion / tutorial on www.se-nse.com there is a fountain of inspiration.
Ask Den-Po there... He's the man!
NOw... we can go back to subject in discussion?
Anybody who asked for more fps in viewfinder..... is it better? |
osfcross
Joined: Nov 16, 2006
Posts: 9
PM |
Sorry for the late reply. I had to go to school.
No, i didn't work. The fps didn't improve at all.
You modified Andeo's 7.7 final right? There's something in that driver that made the camera have a great viewfinder fps rate.
[ This Message was edited by: osfcross on 2006-11-17 14:55 ]
[ This Message was edited by: osfcross on 2006-11-17 15:00 ] |
RENOSJ
Joined: Sep 16, 2006
Posts: 14
PM |
Hi jiji,
thanks for your work on increasing frame rates, but unfortunately there is no change. I see your driver so genial - it seems that zuza has its own life and keep denying any changes from the author |
DarkChild
Joined: Sep 25, 2005
Posts: 68
PM |
@ gxg
LOOK, I"M ASKING A LEGITIMATE QUESTION. I DON"T KNOW IF THIS DRIVER IS IMPROVED FROM THE ORIGINAL ZUZA OR ZUZA 2.
YOU JUST PUT IT AS ZUZA 3.
ZUZA AND ZUZA 2 HAVE DIFFERENT COMPRESSION RIGHT? IF I'M NOT MISTAKEN, THIS IS WHAT I UNDERSTOOD FROM THIS POST ;
Quote:
|
On 2006-11-12 21:58:03, jiji wrote:
means that macros have to be close, not used for distance shoots. By definition of macros, you'll have to take it from close distance.
And for all is ZUZA not Zuzu yogurt.
Everyone who can improve this cam driver code is welcome.
This driver came accidentally and it seems to work just fine.
The balance is found, it's only to find the details who will make the differnece.
And it's up to you ppl.
Glad that you like it.
here is zuza 2 (i lowered the compresion) ..for the pps!
http://www.4shared.com/dir/1265980/88343429/zuza_2.html
[ This Message was edited by: jiji on 2006-11-12 21:03 ]
|
|
I KNOW THE FPS IS IMPROVED BUT IS ZUZA 3 AN IMPROVEMENT OVER ZUZA OR ZUZA 2?!? DOES IT HAVE ZUZA OR ZUZA 2 COMPRESSION?!? I'M NOT ASKING IF THE COMPRESSION HAS BEEN IMPROVED. IS THAT SO MUCH TO ASK?!? SOME PEOPLE PREFER THE COMPRESSION FROM ZUZA COMPARED TO ZUZA 2.
SO, WHEN YOU ASK ME TO "READ CAREFOUL!! PAY ATENTION!!!" LOOK IN TO THE MIRROR WHEN YOU SAY THAT. I BELIEVE IT'S YOU WHO DOESN'T READ PROPERLY.
By the way, since you have so much time in you hand to be rude, why don't you use some of that time to learn some english, or should I say, "engrish". I come from a small country called Malaysia and even I type and undertand english better than you.
[ This Message was edited by: DarkChild on 2006-11-17 19:22 ]
[ This Message was edited by: DarkChild on 2006-11-17 19:26 ] |
DarkChild
Joined: Sep 25, 2005
Posts: 68
PM |
Quote:
|
On 2006-11-17 08:34:46, G-Izzat wrote:
darkchild,
this is the changes in zuza 3 - viewfinder fps improved.
gxg,cool down,man.
woozah.
|
|
G-Izzat,
I know the only changes made in Zuza 3 are the improved FPS.
What I want to know is what Zuza 3 is based on, the original Zuza or the Zuza 2 with the changed compression. It's not stated in any of the posts right?
Cheers for trying to help me out.
[ This Message was edited by: DarkChild on 2006-11-17 19:15 ] |
gxg
Joined: Nov 11, 2005
Posts: 270
From: Romania
PM |
Quote:
|
On 2006-11-16 20:58:37, gxg wrote:
here is zuza 3 aka 5.3 (as original)
- viewfinder fps improved... i think! anyway.. wait your opinions
http://www.4shared.com/dir/1298297/73243026/zuza3.html
once again.. i'm sorry.. i don't have too much time to reply to every post in particular.. so.. I'll gather some infos.. and reply 2 all in 1.
Quote:
|
On 2006-11-16 20:50:27, gprsman wrote:
Question, the w810 has the camdriver0.dat in the file system like in the k750/w800? a my friend would want that you changed camdriver with mine setool + to it dongle… someone has tried?
thanks.
|
|
man.. is the same driver.. except that occasion when you want to put in W810 an modded driver...
[ This Message was edited by: gxg on 2006-11-16 20:01 ]
|
|
read again.. i will sell my K-W750 and i will forget this forum if you tell me where in the hell is written in my post about compresion or anything else except VIEWFINDER.
man u have issues!
i'm coming from a small country called romania.
And when i'm nervous i don't pay attention to spelling. And I saw worse english than mine. And this is the only forum where I'm posting in a crazy speed. so.... relax, just chill and read close to monitor.. pay atention..watch the black signs... can you understand?
As i remember someoane requested FSP improvent in viewfinder mode... so I said that "i can do this" and to be good fellow .. I posted zuza driver only with "viewfinder fps impoved " that's it!
and I don't want to be rude... i only want some attention from you before shoot questions .. and if you have questions other than subject in disscution ... put it in PM. not in the forum...
From Dracula country for Darkchild .... George!
P.S. I think I would have mentioned ( For DeeeDeeDeee People)... if the new driver was based on zuza2 or zuza... as in your case .. ZUZA is only 1 .. the rest are variations on a given theme... OK?!
further questions?
[ This Message was edited by: gxg on 2006-11-17 19:29 ] |
DarkChild
Joined: Sep 25, 2005
Posts: 68
PM |
@ gxg,
I have issues?!?! Look, you're the one who started this. I asked a simple question and all you had to do was give me a simple answer.
YOU made it complicated.
I KNOW the only changes made to Zuza 3 is the FPS! How many times do I have to say this?!? If you read my post you would understand that. It's very simple, look for it in my 2006-11-17 11:08 post ;
Quote:
| On 2006-11-17 11:08 DarkChild wrote :
"I KNOW THE FPS IS IMPROVED" but is Zuza 3 and improvement over Zuza or Zuza 2?!? |
|
If you had just said it's based on Zuza, wouldn't it have been much easier? It would have saved you so much time being rude and typing all this crap?
Geeze... |
flintolino
Joined: Dec 30, 2005
Posts: 59
PM |
Quote:
|
On 2006-11-17 20:25:25, gxg wrote:
Quote:
|
On 2006-11-16 20:58:37, gxg wrote:
here is zuza 3 aka 5.3 (as original)
- viewfinder fps improved... i think! anyway.. wait your opinions
http://www.4shared.com/dir/1298297/73243026/zuza3.html
once again.. i'm sorry.. i don't have too much time to reply to every post in particular.. so.. I'll gather some infos.. and reply 2 all in 1.
Quote:
|
On 2006-11-16 20:50:27, gprsman wrote:
Question, the w810 has the camdriver0.dat in the file system like in the k750/w800? a my friend would want that you changed camdriver with mine setool + to it dongle… someone has tried?
thanks.
|
|
man.. is the same driver.. except that occasion when you want to put in W810 an modded driver...
[ This Message was edited by: gxg on 2006-11-16 20:01 ]
|
|
read again.. i will sell my K-W750 and i will forget this forum if you tell me where in the hell is written in my post about compresion or anything else except VIEWFINDER.
man u have issues!
i'm coming from a small country called romania.
And when i'm nervous i don't pay attention to spelling. And I saw worse english than mine. And this is the only forum where I'm posting in a crazy speed. so.... relax, just chill and read close to monitor.. pay atention..watch the black signs... can you understand?
As i remember someoane requested FSP improvent in viewfinder mode... so I said that "i can do this" and to be good fellow .. I posted zuza driver only with "viewfinder fps impoved " that's it!
and I don't want to be rude... i only want some attention from you before shoot questions .. and if you have questions other than subject in disscution ... put it in PM. not in the forum...
From Dracula country for Darkchild .... George!
P.S. I think I would have mentioned ( For DeeeDeeDeee People)... if the new driver was based on zuza2 or zuza... as in your case .. ZUZA is only 1 .. the rest are variations on a given theme... OK?!
further questions?
[ This Message was edited by: gxg on 2006-11-17 19:29 ]
|
|
You still get nervous over some dude asking something you don't really have to answer? And do you really have to argue everytime someone ask something stupid? I'd rather see a nice answer than another of your freak out posts dude.. seriously.. I'm starting to think it's not the drivers that got issues... it's you.
Why don't you just do your fking job and shut the f**k up? This post was much better before you bring your sexual frustration to it.
I'm starting to agree with wiser... I too think you're some kind of f**ked up kid who wants to rule this topic but lives a mediocre life out of it.
Please... read this "CAREFOURLY"... I don't give a shit if you're a good driver modder or not... I'm sick of your attitude and I'm not the only one.. you should consider changing it.
I'd rather use a useless bugged to death driver than deal with a chubby virgin gangsta wannabe again ... "WRILLY".. get a f%king life dude!
And before you bring that "what is your contribution" bullshit again, I've been testing drivers way before you get here... and it would be much better if you just shut your mouth instead of starting another 10 pages argument over some stupid "noob", as you love calling them. That would be a great contribution.. maybe even better than your drivers since we wouldnt have to scroll 10000 useless pages back to find something useful.
By the way.. you don't like my reply? I don't give a shit.
Grow a fking dick and stop crying.
@everyone else
Im really sorry about this reply, I had never written anything like this here before and I thought I'd never have to, but looks like ppl are too tired licking his a$$ because of his drivers to remember we are dealing with humans here, and humans ask, humans are curious and humans are lazy.... yet... humans should still be respected.. This is a forum.. not his house.
[ This Message was edited by: flintolino on 2006-11-18 05:25 ] |
Xema
Joined: Dec 27, 2005
Posts: 108
From: Barcelona
PM |
C'mon boys, just relax and take it easy!
We are taking about cam drivers, there is no need to take things personally! |
|
|
Posted: 2006-11-17 06:05
800i R1BC002
