| Author |
Unlock your phone for FREE! (6230, 7610, 7600, e616...) |
Leks
Joined: Jan 12, 2003
Posts: > 500
From: Sweden
PM |
|
|
|
skaroger867
Joined: Jul 09, 2004
Posts: 190
PM |
im in the states so how does this help me cause i dont see my country on the site (dont have any phones i need unlocked...but you never know when one might come into my possession) |
afterburn
Joined: Nov 07, 2004
Posts: 2
PM |
Please help me!
i want to unlock my nec e616v with the codes posted and translated here. I can't figure out what to write under "password" in #4960* password #. What should i write ... #4960* what? #
thanq in advance |
fatreg
Joined: Jul 26, 2003
Posts: > 500
PM |
No no no no!
Box serial is not individual to each Nokia phone, its indivdual to each service box, ie Nokia Neelix 3, Prodigy Box, etc! same as you should you get a version of SE fighter, not only does it identify which box is which it also tells the box with algorithm to use to generate the codes, if you try the ssme imei with different boxes it will generate loads and loads of diff codes, New prodigy is the most up to date on trycktill. but say you wanted to unlock a 3210, which is a DCT3 handset, a year ago you would have needed an LPT flasher cable and some fairly simple sw. however due toi technical advances its now possible to unlock them via codes, but id use a old griffin for a 3210. but hey ho! each to their own!
All the newer Nokias that are coming out are DCT4.5, so you have to wait a month or so after launch to get them unlocked. so whoever asked about the 6230 is a DCT4.5 handset but it can be locked!
and to whoever asked about the States on the Trycktill website, all you need to do is select other country and then input for networks 6 digit ID code which can be found:
http://www.gsmworld.com/roaming/gsminfo/index.shtml
if you arew the US though, and are on Tmob or Cingular, apparently they have lots and lots or network ids. so good luck!!
anyone has any more question feel free to ask!
fatreg
_________________
"live fast, die young"
K700i x 2, T610, T68, T39, SPV E200, SPV C500 Silver, N-Gage, 3510i X 2, 5.1 x 2, 5140, 5210, 6100, 6150, 6230, 6310i x 2, 6510, 6610 X 2, 6610i, 6820, 7210 x 2, 7250i, 7600 x 2, 8310 x 5, 9210, S55, SL55, V66, V600, V80, Z5
[ This Message was edited by: fatreg on 2004-11-07 10:00 ] |
p900 lover
Joined: Jan 08, 2004
Posts: > 500
From: London
PM |
those of u who have unlocked their 7600 tell me what happends, does it still try and took for a 3g network???? |
rajenvara
Joined: Aug 03, 2004
Posts: 12
PM |
p900 Lover: I used this site to unlock my Nokia 7600, and it works fine on all gsm networks. No problems at all. Using it on o2 at the mo. |
fatreg
Joined: Jul 26, 2003
Posts: > 500
PM |
at P900 lover,
i unlocked mine there and it still looks for a £g signal, if you bought your 7600 on 3pay, you will always have this problem unless your network turns off their 3g signal! or you have your 7600 flashed with euro software,
best bet is take it to your local CPW and tell them that because you have poor 3 signal at home, they have told you that you can flash it with euro software so it will only work on O2, then unlock it again and hey presto!
fatreg
|
MONO2GO
Joined: Nov 12, 2004
Posts: 2
PM |
I see there are a lot of questions about NEC e616v, e616. Just to clear everything. The old NEC "trix" that already have been explained in this thread works on old software versions. It will NOT work on newer versions.
Then there is a different between the old instructions for e616 (depending on software version. Many e616 are having the same software as the e616v model) and e616v. So check your version in your phone.
How to check version
*#2820# check version
If you are having the version acpu:125.56.07 ccpu:c623.r0v. Then it´s the e616v instruction you should use. If you are having ACPU:A025.63.11 CCPU:C623.R1Y.Q or ACPU:A126 00.02 CCPU: C623R2A and above (what I know) then none of the instructions will work.
|
p900 lover
Joined: Jan 08, 2004
Posts: > 500
From: London
PM |
im having problem unlocking my 7600, under the netwrok there are 3 tmobile, which 1 do i go for?
and how do i find out the box serial ????
thanks |
Leks
Joined: Jan 12, 2003
Posts: > 500
From: Sweden
PM |
I think fatreg described how to find box serial earlier in this thread 
|
MONO2GO
Joined: Nov 12, 2004
Posts: 2
PM |
To find out which boxserial to use press *#0000# then you will get a software version and a date.
This is not an "black and white" thing.
Depending on the version and the date you can choose a boxserial that hopefully will work.
If your phone are between 2003-01-12 -> 2004-01-01 then the moste common 33820 (also called v2) will work in moste cases.
//
[ This Message was edited by: MONO2GO on 2004-11-13 15:34 ]
[ This Message was edited by: MONO2GO on 2004-11-13 15:35 ]
[ This Message was edited by: laffen on 2011-01-21 03:09 ] |
p900 lover
Joined: Jan 08, 2004
Posts: > 500
From: London
PM |
thanks for that,
i will post back how it goes when i get my new sim from 3
|
wapchimp
Joined: Jun 09, 2002
Posts: > 500
From: Land of the chimps
PM, WWW
|
NEC 313 unlock is long winded.
Easy way if I remember is to put 2g sim in, diall 112 (emergency call) phone will say cannot make call in 3g mode, switch to 2g? (or similiar) then quickly hang up!
Then you can make voice calls only, not text or use wap as settings o handset are 'software locked'
[addsig] |
fatreg
Joined: Jul 26, 2003
Posts: > 500
PM |
How do me make this sticky??
it needs to be!
fatreg
|
Leks
Joined: Jan 12, 2003
Posts: > 500
From: Sweden
PM |
PM laffen  |
|
|
Posted: 2004-10-30 20:16
