| Author |
FAR plugin for internal file system access using DCU-60! |
dinho666
Joined: Jun 07, 2006
Posts: 103
From:
PM |
Quote:
|
On 2006-06-19 21:32:46, zerocool2207 wrote:
hey
i think i just bricked my phone:s
Earlier i posted that my phone would not connect to K750flasher.
i decided to install everything on my notebook.
it finally worked. my phone was being flashed, i went away for 5min but i had forgotten to plug in my notebook to the electricity===> notebook shutdown during the flashing of my cellphone. Now my cell phone wont start:s
is there a way to recover my cellphone?
ZeRoCooL
|
|
bro,
put your phone to charge....
wait about two hours, remove the batteries, give it a 30 seconds, and put the battery again. open Davinci 13.7 and try to test the cable
if it works, put the right files and flash your phone again...
i will need to get FAR+ darkmens plugin. Look for the thread and download the custom.rar, extract everything to a folder that you want.
Go to custom folder, delete drm folder from there, open the customize. xml using a notepad, and put the right CDA, and default language that you want, save the file. Copy everything to the custom folder, then create the drm folder again. finalize FAR, remove your phone, and well done... your phone will work again!!!
if after two hours your phone didnīt reconized by the davinci, give more time.... it will work, but donīt forget... give the full charge for your phone before it...
Who Wanna Live Forever???
*|No Hissing| 7.12(e_erzan edited) camdriver |menu icons edited |media player skin| Slim Fonts|W810 AcousticsR1BC002 AMERICA 2 |Unlimited SMS capacity |
-"W750" mooded, K850 full debranded |
|
|
datx
Joined: Dec 15, 2004
Posts: 130
From: Portugal
PM, WWW
|
tasty boy whats the big difference between portuguese and brasilian portuguese, nao consegues perceber? |
zerocool2207
Joined: Dec 11, 2005
Posts: 8
PM |
i cant connect it to the pc. it says to me "usb unknown device" , it won't install the drivers:s |
dinho666
Joined: Jun 07, 2006
Posts: 103
From:
PM |
Quote:
|
On 2006-06-19 22:27:33, zerocool2207 wrote:
i cant connect it to the pc. it says to me "usb unknown device" , it won't install the drivers:s
|
|
SO, access topsony members area and download the usb drivers to your pc, and then try it...
or try it on your laptop. But try to download the usb drivers...
Who Wanna Live Forever???
*|No Hissing| 7.12(e_erzan edited) camdriver |menu icons edited |media player skin| Slim Fonts|W810 AcousticsR1BC002 AMERICA 2 |Unlimited SMS capacity |
-"W750" mooded, K850 full debranded |
ShaniLa
Joined: Jun 14, 2006
Posts: 6
PM |
If I customize my "customize.xml," will I still be able to update VIA SEUS? Thanks! |
dchky
Joined: Dec 20, 2005
Posts: 18
PM, WWW
|
So long as you don't swap out your firmware for another phone model, then yes, you will still be able to update.
Quote:
|
On 2006-06-19 23:21:45, ShaniLa wrote:
If I customize my "customize.xml," will I still be able to update VIA SEUS? Thanks!
|
|
|
ayejatt
Joined: Dec 15, 2005
Posts: > 500
From: Hong Kong
PM |
there was a tread with many default file collection of different phones we can use straight away... cant seem to find it now  |
gsq
Joined: Dec 27, 2004
Posts: 1
PM |
Quote:
|
On 2006-06-19 19:41:16, kingcool88 wrote:
Darkmen wrote this:
"We have only 2 possibilities to brake CID49 security
1.To brake cert's key. It wil take about 20000 years of brutforce attack.
2.To scan all CID49 signed stuff for bugs and errors."
Does this mean that its almost impossible to make this plugin avaible for CID 49 phones such as W900, and W810 ?:(
|
|
Probably so, unless there are very competent SE programmers here, your other bet would be to buy commercial tools such as SETool or Cruiser which is able to do it for such phones... and almost ALL SE phones...  although its not too cheap just to change some menus or tweak cam drivers... not sure if davinci or TMS does support FS operations...
Bottom line at the moment is, for CID49 phones, you'll have to pay...
|
mongoose3800
Joined: Nov 29, 2005
Posts: 416
From: Australia
PM |
I've updated my R1BC camera software a couple of times. The 1st time resulted in no camera. But, I think this was caused by me using a lowercase F when I edited camdriver0.dat . After that Ive had no problems changing the settings. Anyway, I have tested images taken before and after increasing the jpeg compression value and the only outcome I can see is larger image file size. I really can not see any noticeable improvement in image quality and can not see the benefit of using more precious memory than necessary for images. So, I've reverted back to the original camdriver0.dat . Perhaps with the MXE flash it's more noticeable and worth while. I'd like to know if anyone has really noticed a worth while increase in photo quality with normal (non flash) photos? Would anyone care to post before and after photos that show a clear improvement on the same firmware? |
coolfriend07
Joined: Aug 29, 2005
Posts: 34
PM |
Has anyone replaced r1bc cam driver with modified r1ca driver? |
mongoose3800
Joined: Nov 29, 2005
Posts: 416
From: Australia
PM |
Well I might have answered my own question. I downloaded the original unmodified 5.3 driver. Took some shots. Then I manually changed the 5.3 driver and compared it to orig 5.3 images. I do think that there may be a slight increase in picture quality. i.e less graininess. But as it is getting dark and Im stuck inside at work it's a bit hard to do proper comparisons. One interesting thing I do notice about the 5.3 driver is the "GET_SENSOR_VERSION=" section. This is not in 4.5. I wonder if this has anything to do with how picture quality is handled? Or, if it has anything to do the different sensors in the similar W700? It must be checking for some reason. Perhaps there are different sensors in existing K750/W800's - depending on when and where they were made. |
Athlon
Joined: Aug 06, 2004
Posts: 10
PM |
I want to upgrade my eplus K750i to the latest R1CA021 using the method described on page 2. On TopSony the flashfiles have .mbn- and .fbn-format. How Do I use these files with Davinci? Or can I use the Davinci .dvt-Files?
Do I need another Tool besides Davinci and FAR + plugin for flashing and debranding? |
Shnoob
Joined: Jul 30, 2005
Posts: 15
From: Belgium
PM |
Quote:
|
On 2006-06-20 10:59:21, Athlon wrote:
I want to upgrade my eplus K750i to the latest R1CA021 using the method described on page 2. On TopSony the flashfiles have .mbn- and .fbn-format. How Do I use these files with Davinci? Or can I use the Davinci .dvt-Files?
Do I need another Tool besides Davinci and FAR + plugin for flashing and debranding?
|
|
Files are fine, ignore the extension and just load the files in the right section, main in main, fs in fs. Works fine. |
Shnoob
Joined: Jul 30, 2005
Posts: 15
From: Belgium
PM |
Can someone please post the K750 R1CA021 EU2 or EU3 firmware, I still have no access to topsony.com. Tried to register but have not recieved any info yet. |
Mike2
Joined: Feb 04, 2005
Posts: 322
From: Thessaloniki, Greece
PM, WWW
|
Just wondering, can I use this tool to increase the playback volume of MP3s/AMRs/Midis on a K750?
Thanks  |
|
|
Posted: 2006-06-19 22:01
