| Author |
Modded Camera Driver for k800i/k810i |
amarsidhu
Joined: Mar 09, 2004
Posts: 361
PM |
even its good if you are watching the vdo from far away and full screen its quite ok.
keep it up kopritis
[addsig] |
|
|
juming
Joined: Dec 11, 2001
Posts: 141
From: Indonesia
PM, WWW
|
Here revised camdriver, it's set back all compression and buffer size to default, slightly enhanced sharpening, 30 FPS video (with small glitch on zoom while record on normal mode), no problem at bestpic
http://rapidshare.com/files/53316303/camdriver0.zip.html |
fraseyboy
Joined: May 05, 2007
Posts: 26
PM |
On 2007-09-04 10:10:45, IceCarpediem wrote:
Hi all,
I'm new to this modding thing. I saw the 2.9 cam drivers and the photo quality is AMAZING!
I've downloaded the driver, but how do I install it into my K800?
Also, is it possible to flash a K800 to become K810 using Waton service?
Here http://www.esato.com/board/viewtopic.php?topic=153863&start=0 |
kimot01
Joined: Jul 06, 2007
Posts: > 500
From:
PM |
flashing with seus will make my phone's camera driver back to 2.5??
you can always find one if you know where to look i  myself |
juming
Joined: Dec 11, 2001
Posts: 141
From: Indonesia
PM, WWW
|
On 2007-09-04 12:24:19, kimot01 wrote:
flashing with seus will make my phone's camera driver back to 2.5??
Yes. SOL. |
Raiderski
Joined: Jul 03, 2006
Posts: > 500
From: Poland, Hell, Mountains
PM, WWW
|
K800 modders
if someone have camera crash because of too high (95%) quality try this:
below cam_ss_sync=5;
add line cam_ss_retries=5;
then modify:
seq_set_prop_5_9 = $"3M_low_comp"
#SET_REG(19,5F) // (95%)
#SET_REG(1A,5F) // (94%)
#SET_REG(1B,55) // (85%)
#SET_REG(13,84) #SET_REG(14,03)
#SET_REG(17,20) #SET_REG(18,03)
#SET_REG(15,58) #SET_REG(16,02);
before you check this in your phone rememeber to set 3MP and Fine quality 
K800 drivers can take only one snapshot. if you set quality at too high value then camera will crash. to avoid this more snapshots should be taken (cam_ss_retries) to find compression % which isn't problem for 900kb buffer. second problem: flash will fire only at first snapshot and if first snapshot will fail then next snapshot will be taken but without the flash! you should check flash on/off state before you take snapshot and if flash is enabled then original compression settings should be used to prevent snapshot retakes. this works wonderful in modded K750/W800/W810 drivers
_________________
W800 CID36 R1BD001
www.flickr.com/photos/8469432@N06/
[ This Message was edited by: Raiderski on 2007-09-04 13:03 ] |
rockygali
Joined: Nov 21, 2005
Posts: > 500
From:
PM, WWW
|
kopritis ver 3 camdriver doesnt crash...
but it has issues on BestPic™ the focus is a bit delayed... and the viewfinder jiggles.....
i guess an esatonian pointed that one out... that the Bestpic takes refuge on the video specs side... thats why this 35fps is overdone...
is this what the 30fps have corrected?
"Darkness is the absence of light.. and not the opposite..." |
Raiderski
Joined: Jul 03, 2006
Posts: > 500
From: Poland, Hell, Mountains
PM, WWW
|
On 2007-09-04 14:14:53, rockygali wrote:
kopritis ver 3 camdriver doesnt crash...
did you tested this in forest or in other high detailed scenery?
|
juming
Joined: Dec 11, 2001
Posts: 141
From: Indonesia
PM, WWW
|
On 2007-09-04 14:14:53, rockygali wrote:
kopritis ver 3 camdriver doesnt crash...
......
is this what the 30fps have corrected?
Yes kopritis can crash, try set an macro mode. best pic already corrected in above link. |
juming
Joined: Dec 11, 2001
Posts: 141
From: Indonesia
PM, WWW
|
On 2007-09-04 13:53:17, Raiderski wrote:
K800 modders
K800 drivers can take only one snapshot. if you set quality at too high value then camera will crash. to avoid this more snapshots should be taken (cam_ss_retries) to find compression % which isn't problem for 900kb buffer. second problem: flash will fire only at first snapshot and if first snapshot will fail then next snapshot will be taken but without the flash! you should check flash on/off state before you take snapshot and if flash is enabled then original compression settings should be used to prevent snapshot retakes. this works wonderful in modded K750/W800/W810 drivers
_________________
W800 CID36 R1BD001
http://www.flickr.com/photos/8469432@N06/
[ This Message was edited by: Raiderski on 2007-09-04 13:03 ]
Thanks Raiderski, but I think some case the problem will occurs over and over again, I do much in macro mode, and I have some angle to take photo which is ALWAYS reset the camera if I take an snapshot, no matter what compression (beside original of course), I already try 95 and it's crash, try retake several time (3-4 times) and all failed, so I decrease to 92%, and this time also 4 of 4 times failed, so I get back default and it's never failed, and guess what, that file size is average at 905-906 KB in size with default setting (90), so no wonder it always failed if i decrease compression, cause it will give more than 909 KB (101% of handling capacity).
Your suggestion is good, maybe later I will try it, but in mean time the much reliable setting still 90% only, best pic already fixed so it can incorporate with video recording set at 30 FPS. |
gprsman
Joined: Aug 28, 2006
Posts: 269
PM |
@ juming
I have problem with rapidshare ,please other link thanks.
[ This Message was edited by: gprsman on 2007-09-04 18:08 ] |
kopritis
Joined: Mar 11, 2007
Posts: 295
From: Loutsa-Greece
PM |
What firmware do you have all of you, at your phones???
i have k810i fw:r6bc002 cid52 and i dont take crash even with hex 64 (100%)!!! except for the problem with video rec in zoom....
[ This Message was edited by: kopritis on 2007-09-04 19:12 ] |
[c3]
Joined: Aug 18, 2004
Posts: 181
From: Kuwait
PM |
r1gb001 with 3.0 cam driver and 35fps. no prob whatso ever. |
testuser9
Joined: Aug 27, 2007
Posts: 20
PM |
can u uplaod the 100% version kopris? |
pedrops
Joined: Jan 30, 2007
Posts: 181
PM |
@Juming
I'm gonna test your driver too =]
@Kopritis
K800i R1KG001 and never crashed with any driver.. yours, number1... |
|
|
Posted: 2007-09-04 10:46
myself
