| Author |
k700i De-Branding now possible with T28 service cable ) |
mwarner
Joined: Dec 23, 2003
Posts: > 500
From: Warwickshire, England
PM, WWW
|
@iamcrunchie
Is this the Powerakku Li-Poilymer 1100 mAh battery for £12.05? If so, have you noticed any disadvantages in using it over the standard SE battery. I was under the impression that SE phones didn't 'like' non SE batteries and went into some sort of safety mode when charging, which meant charging takes a lot longer? |
|
|
iamcrunchie
Joined: Feb 02, 2004
Posts: 90
PM |
Apparrently its been tested by SE.
It does take a little longer to charge but thats normal because its a higher capcity so it needs longer.
Its been fine so far, no problems whatsoever.
|
vee
Joined: Jun 22, 2004
Posts: 435
From: Zagreb, HR
PM |
I did it...
1. debranded one K700i
2. debranded one F500i
3. upgraded one K700i
Used the indtructions that were in program. I finally got some shitty chinese cable that worked (still no DSS support).
Ask me if you want anything!
Take care
Velimir |
kenski
Joined: Aug 15, 2002
Posts: 369
From: Philippines
PM |
@velmir, anyway i can check if the cable that i have works w/o buying a credit?...tnx 
 forever Read the FAQ before u post a new topic.. 8810->6150->3310->t68i->t610->t630->k700i  |
vee
Joined: Jun 22, 2004
Posts: 435
From: Zagreb, HR
PM |
Uhm... actually no you can not check... I checked with ComTest from B&B electronics... to see if cable is fine, but I guess you can not check if it is data or unlock cable, anymore (you could do it before in older versions with default username and password, but that is disabled now).
Take care
Velimir |
iamcrunchie
Joined: Feb 02, 2004
Posts: 90
PM |
If it works with floats mobile agent then its a data cable NOT a service cable, but you can of course convert it like it says in this thread |
Anish1905
Joined: Oct 14, 2003
Posts: 16
PM |
I just tried it and got some error starting with 2........ what can i do it asks for another credit? |
vee
Joined: Jun 22, 2004
Posts: 435
From: Zagreb, HR
PM |
@ Anish1905
hope you made a screenshot... send it to anyone you bought your credit from. Than you'll get your credit back and support from them.
Be sure your battery is full, you use the latest version (1.30) that you chose the right speed and that you follow the instructions.
Hope this helps
Velimir |
Anish1905
Joined: Oct 14, 2003
Posts: 16
PM |
i couldnt take a screenshot. I have asked them to refund the credit don't know if they will i bought another one anyway.
Is this the right way to do it on 1.30
click on repair/unbranding
select K700_R2AA003_ZONE_1.K7S
select K700_R2AA003_EU1.K7D
then flash
The question is do i do them both at the same time? |
vee
Joined: Jun 22, 2004
Posts: 435
From: Zagreb, HR
PM |
I did them together... No problems... You try first firmware and than default language - follow the instructions on http://www.totalserver.net
It will use only one credit anyway...
Be sure your battery is full and your phone is off. I didn't press the power button when it asked me I just plugged the cable in the phone - only then.
Velimir
[ This Message was edited by: vee on 2004-10-13 19:11 ] |
Anish1905
Joined: Oct 14, 2003
Posts: 16
PM |
im trying them both together as i type. hope it works. |
morak
Joined: Oct 10, 2004
Posts: 7
PM |
Just tried to do mine, both together, got:
Enabling functionalities....
Error connecting to server.
Phone dead, still got my credit though. Trying again.
Was using 1.30.
|
vee
Joined: Jun 22, 2004
Posts: 435
From: Zagreb, HR
PM |
don't type while you flash your phone  ...
No I really recommend that you don't do anything else with your computer while you flash the phone...
Which operating system you are using?
Velimir |
morak
Joined: Oct 10, 2004
Posts: 7
PM |
@vee
if that was for me, im using XP SP2.
morak |
vee
Joined: Jun 22, 2004
Posts: 435
From: Zagreb, HR
PM |
@ morak
that was the scariest part for me also... It stood there for some time, but went through luckily... Maybe problem on the serverside...
Take care
Velimir |
|
|
Posted: 2004-10-13 13:58
forever 
