Esato

Forum > Sony Ericsson / Sony > Software, Firmware and Drivers > W810 Firmware Details and Bugs

Previous  123 ... 232425 ... 434445  Next
Author W810 Firmware Details and Bugs
ercm03
T610
Joined: Jun 06, 2005
Posts: 3
PM
Posted: 2006-08-19 20:40
Reply with quoteEdit/Delete This PostPrint this post
I contacted SE about this fault which I originally brought up in the expansys
forum (see http://www.expansys.com/forumthread.asp?code=129336&thread=433).

This is what I eventually got back:

"With regards to your enquiry, this issue is not a common fault on the Sony
Ericsson W810i with R4DB005 software installed.

Please try removing the picture from the contact and reapplying it.

If this does not solve the issue, please try a master reset of your handset to
help rectify the issue (information below) or Update your handset again using
the Sony Ericsson Update Service."

I've tried the remove/reapply picture and re-updating to no avail. Don't really fancy the
master reset as the hassle of setting it all up again seems greater than the loss of
the contact picture...
getagrip15
K790
Joined: Oct 03, 2003
Posts: 486
PM
Posted: 2006-08-21 05:17
Reply with quoteEdit/Delete This PostPrint this post
I also notice that pictures come up very slowly in the gallery with the newest FW. Anyone else notice that?
DIFference
W810 black
Joined: Nov 28, 2004
Posts: 41
PM
Posted: 2006-08-21 20:43
Reply with quoteEdit/Delete This PostPrint this post
Quote:

On 2006-08-19 18:37:44, MattyGB wrote:
Oh well I have discovered one new "feature" of R4DB005 and it's not a good one!

Now, when I receive a call from someone who has a picture contact in my phone, all I get is an empty space where the picture contact and caller ID should be, and their pic only appears when I answer the call! So, now, there's no Caller ID at all for any call from a pic-contact!

ALso, when making a call to someone with a pic contact, I get an empty space again while it's connecting, rather than their number and the usual graphics!

This is not good!



I don't get that. It works fine for me with that firmware.

Anyone knows if PC Suite MUST be installed when upgradeing firmware? Read that somewhere but it sounds unnecessary...

Quote:

On 2006-08-21 05:17:57, getagrip15 wrote:
I also notice that pictures come up very slowly in the gallery with the newest FW. Anyone else notice that?



Only the 2 mpix photos because they are a little bigger. But it was the same with the earlier firmware for me.

[ This Message was edited by: DIFference on 2006-08-21 19:45 ]
JAGUY85
Xperia X10 Black
Joined: Oct 17, 2003
Posts: > 500
From: Jamaica
PM
Posted: 2006-08-23 06:39
Reply with quoteEdit/Delete This PostPrint this post
You don't have to have the PC Suite installed when updating your phone.

This message was posted from a Nokia

abbafan1972
Samsung Galaxy S II
Joined: Jan 05, 2006
Posts: > 500
From: Birmingham, UK
PM
Posted: 2006-08-24 10:46
Reply with quoteEdit/Delete This PostPrint this post
2 see the clock in standby mode you need to press the volume button.
raf
W880 Silver
Joined: Feb 07, 2002
Posts: 14
From: Finland
PM
Posted: 2006-08-24 22:23
Reply with quoteEdit/Delete This PostPrint this post
... Or the Walkman button
ACCESSTEL
T68 gold
Joined: Aug 24, 2006
Posts: 1
From: USA
PM
Posted: 2006-08-24 23:44
Reply with quoteEdit/Delete This PostPrint this post
Hey Guys !!
Im trying to find this software version R4DB004; Its for my W810i
Can you help me ?

And I dont know if I need a especial program to flash my phone...

can you give me a tip!!

THANKS!!
getagrip15
K790
Joined: Oct 03, 2003
Posts: 486
PM
Posted: 2006-08-25 00:33
Reply with quoteEdit/Delete This PostPrint this post
google for wantonserver.
Walleth
W810 black
Joined: Aug 26, 2006
Posts: 1
PM
Posted: 2006-08-26 13:37
Reply with quoteEdit/Delete This PostPrint this post
Hey all,

I'm really dissapointed about the fact there is no sleep mode clock feature on my new w810i, which even the k750i had.

I don't like having to push the volume or walkman keys to see the clock and check if there are messages.. not a fan of the plain black screen in standby.

Is there any way to add the sleep mode clock feature? Is it being planned for future firmware?

Thanks for your time!
ashburyfaith
T68 gold
Joined: Aug 26, 2006
Posts: 6
From: Manila,Philippines
PM
Posted: 2006-08-26 16:04
Reply with quoteEdit/Delete This PostPrint this post
Anyone from the Philippines?

After barely two months of usage, my w810i crashed so i had it reprogrammed but then after that, the fm radio isn't working anymore. the radio menu still opens when i insert the headset but it gets no reception (as in nothing!) anymore and the frequency is stucked at 90mhz, it doesn't move further on.

i dunno if it has something to do with a problem on the software (coz of the re-programming done) or worse, a hardware problem (but after reading the posts here i think that it has to do with the software.)

the version in my fone now is R4CA026. I dunno if it's the right version.
i didn't check the previous version before it crashed so i wouldn't know if my version now is different.

i was really disappointed coz now i know that many people have the same experience on w810i crashing and all the bugs!. i used to believe that this is a great fone but then again, with all the problems it's causing me right now, i am having second thoughts about it.

jepherberich
C902 Black
Joined: Apr 25, 2006
Posts: 473
PM, WWW
Posted: 2006-08-26 16:37
Reply with quoteEdit/Delete This PostPrint this post
I AM

you get it reflashed, not reprogrammed

You say it now has R4CA? the release firmware version is R4CE, and what you have is pre-release/beta firmware and i wouldnt be surprised if more than the radio part doesnt work. try SEUS first (details of the stuff you need to download is in the first page of this thread). if that doesnt work, i can help you with davinciteam; we can prolly meet in starbucks eastwood (i work somewhere around the area) and you can bring a laptop (wifi spots abound.. wheee!)

it is a great phone. i've had mine for 4 months, dropped it thrice from 4 feet above the solid ground and had absolutely no issues with it. well, except for the exposed lens.

[ This Message was edited by: axilom on 2006-08-30 11:01 ]
ashburyfaith
T68 gold
Joined: Aug 26, 2006
Posts: 6
From: Manila,Philippines
PM
Posted: 2006-08-26 16:55
Reply with quoteEdit/Delete This PostPrint this post
Oh thank God there's you!

After browsing forums for hours now, i pretty have much more idea on how complicated this fone is. darn!

U're right, i also learned that the version i have now is the oldest there is and the technician who flashed it said that they only have two versions (the other one won't work with my fone) available, i went to him last night (@robinson's place-malate) and stayed with him for 3 hrs as he flashed my fone twice, still the radio isn't working.

One of my officemates has the DaVinci package and i texted him to ask what his version is and he said R4DB005. I want to try that software (if possible, for free). Will u really help me with it?

There is a problem with the laptop coz i don't have one but i can do it in the office(i have internet access there) if you can only show me how to do it please. I work somewhere in malate. Are u also at home right now? I can meet u tomorrow if it's convenuient for u. Thanks a lot! Btw, are u a male or a female? =) Thanks again.


ashburyfaith
T68 gold
Joined: Aug 26, 2006
Posts: 6
From: Manila,Philippines
PM
Posted: 2006-08-26 17:47
Reply with quoteEdit/Delete This PostPrint this post
@axilom, i added u to my YM. not sure if it is ur YM ID though.anyway, if it is, pls. add me. thanks.



[ This Message was edited by: ashburyfaith on 2006-08-26 16:50 ]
bish
W810 black
Joined: Sep 10, 2004
Posts: 11
PM
Posted: 2006-08-26 21:43
Reply with quoteEdit/Delete This PostPrint this post
yep, i've got the 005 fw on my orange 810 and it also does not accept caller pic until call established! oh well, more bugs!
bish
W810 black
Joined: Sep 10, 2004
Posts: 11
PM
Posted: 2006-08-26 22:16
Reply with quoteEdit/Delete This PostPrint this post
well, had the bug on my wifes 810 but not on mine(both on 005 fw) used seus to re-install 005 on her phone and now it works fine (NO master reset needed!)
Access the forum with a mobile phone via esato.mobi
Previous  123 ... 232425 ... 434445  Next
Goto page:
Lock this Topic Move this Topic Delete this Topic