| Author |
Super camera driver for k750/w800/w810 |
SPU
Joined: Feb 07, 2007
Posts: 131
From: Russia, SPb
PM |
On 2007-05-15 20:20:24, Raiderski wrote:
SPU has two things which I do not have:
1. sunlight
2. the surgeon stable hand
that's enough 
Yes, but the sun is not a good thing for a phone camera, because of a limited ISO... ISO 50 or 64 is more adequate choice for a sunny weather. I always tries to make a shadow when shooting macro to avoid over/under exposure.
W800i CID36 R1BD001 |
|
|
tyko_04
Joined: May 26, 2006
Posts: 16
PM |
On 2007-05-14 23:05:04, norbi_nw wrote:
i was gone for 4 days, and i've tested krio's 21.9 to the limit! (took 500 pix )
All was ok, but unstable (when took a pic of the sun behind a tree... had to decrease EV to -2.0) but hope this 21.91 better, no crashes. pic is sharp in the middle.
forgot to mention, sometimes i have a focus problem with 21.9. 
[ This Message was edited by: norbi_nw on 2007-05-14 22:08 ]
I had the same problem with krio´s 21.9 and 21.91 too... I hope Krio could fix this bug in his next version...
However, this camdriver is great!!! Thanks krio... Look this pics
[ This Message was edited by: tyko_04 on 2007-05-15 20:02 ]
[ This Message was edited by: tyko_04 on 2007-05-15 20:05 ] |
kopritis
Joined: Mar 11, 2007
Posts: 295
From: Loutsa-Greece
PM |
Beta new mod
Ver7.2 beta Based on the Original 5.3 camdriver from Sony
1. Very Fast Focus at normal light conditions
2. Sharp images at day and night with EN or ENM
3. 75% compression at normal mode and 89% compression at fine mode
4. 15fps video recording at day light an normal conditions and ~8fps with nightmod on
5. ENHANCE MODE when you "turn ON the Macro"
6. ENHANCE NIGHT MODE when you have "Macro On and Nightmode On"
7. Manual Focus [Macro ON: 1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0 with Zoom preview]
8. VIVID Colors
9. Led not supported yet in EN and ENM
http://www.rogepost.com/n/8436163342 (without vivid)
http://www.rogepost.com/n/8667454959 (with vivid)
Instructions for Manual Focus:
-----------------------------------------------------------------------------------------------------------------------------------------------------
(Macro ON).
When in range 1.2-4.0 (+/-) click half-shutter for preview with zoom (you can ON/OFF zoom preview by clicking half-shutter)
now (when zoom is on) you can adjust focus very precisely (+/-)
when picture is most sharp click half-shutter again (the zoom will go off and EV will be corrected)
and now press shutter to take picture.
P.S. Test my new mod and send me notes or problems
[ This Message was edited by: kopritis on 2007-05-15 20:45 ] |
kopritis
Joined: Mar 11, 2007
Posts: 295
From: Loutsa-Greece
PM |
Samples from 7.2 without vivid
Photo was taken with k750I cid49 R1DB001
Macro on: Manual Focus ev0.0 (day)
Macro on: Auto Focus ev0.0 (midday)
Macro on: Focus to Infinity ev0.0 with EN (night)
(This is a house very far away from my house...)
[ This Message was edited by: kopritis on 2007-05-15 20:56 ] |
hellvy
Joined: Jan 19, 2007
Posts: 42
PM |
On 2007-05-15 21:01:11, kopritis wrote:
Beta new mod
Ver7.2 beta Based on the Original 5.3 camdriver from Sony
1. Very Fast Focus at normal light conditions
2. Sharp images at day and night with EN or ENM
3. 75% compression at normal mode and 89% compression at fine mode
4. 15fps video recording at day light an normal conditions and ~8fps with nightmod on
5. ENHANCE MODE when you "turn ON the Macro"
6. ENHANCE NIGHT MODE when you have "Macro On and Nightmode On"
7. Manual Focus [Macro ON: 1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0 with Zoom preview]
8. VIVID Colors
9. Led not supported yet in EN and ENM
...
Hi kopritis,
What's happen with your 5.3 /w k800 code driver? I just thought that's a good spin off :| |
kopritis
Joined: Mar 11, 2007
Posts: 295
From: Loutsa-Greece
PM |
On 2007-05-15 21:16:01, hellvy wrote:
Hi kopritis,
What's happen with your 5.3 /w k800 code driver? I just thought that's a good spin off :|
Niaaa... it's totaly failure Sorry! |
F-Lexx
Joined: May 09, 2007
Posts: 163
From: Romania
PM |
Can someone tell me what is the following effect called? I took the photo today using the "Manual effect" feature from Jonaugust_69's Professional camera driver. I'm pretty sure it's not Negative, because there was also the standard Negative among the effects, together with sepia, solarize, black and white and another one which seemed like a negatived black and white.
 |
kopritis
Joined: Mar 11, 2007
Posts: 295
From: Loutsa-Greece
PM |
On 2007-05-15 22:00:58, F-Lexx wrote:
Can someone tell me what is the following effect called? I took the photo today using the "Manual effect" feature from Jonaugust_69's Professional camera driver. I'm pretty sure it's not Negative, because there was also the standard Negative among the effects, together with sepia, solarize, black and white and another one which seemed like a negatived black and white.
Photo it's like a ghost
[ This Message was edited by: kopritis on 2007-05-15 21:05 ] |
SPU
Joined: Feb 07, 2007
Posts: 131
From: Russia, SPb
PM |
F-Lexx
It's a negative sepia. There is a bug or feature in cammodule... in some cases you can combine negative with some other effects.
W800i CID36 R1BD001 |
F-Lexx
Joined: May 09, 2007
Posts: 163
From: Romania
PM |
SPU, what bug are you refering to?
I really love the idea of combining the effects and right now I was thinking if I could do this with your driver... If not, I'm going to try and include some code from Jonaugust_69's driver into yours. But most likely I'll mess it up.  |
SPU
Joined: Feb 07, 2007
Posts: 131
From: Russia, SPb
PM |
F-Lexx
I can't test this right now... may be this effects are on 5 and 6. I know one thing, once i got negative picture with sepia over it via standart effects menu, but i can't repeat this anymore =(
_________________
W800i CID36 R1BC002
[ This Message was edited by: SPU on 2007-05-15 21:43 ] |
leadtek81
Joined: Sep 05, 2006
Posts: 3
PM |
SPU sher this driver cam 1.3 . pls |
F-Lexx
Joined: May 09, 2007
Posts: 163
From: Romania
PM |
I'll copy/paste the part of Jonaugust_69's code that seems to be responsible for Manual Effects:
$cl $c6 06 $p8 09 $c8 00
$s0 %0 $-0 0a
#COMMAND(53,$w0) //EV -1,0 =Manual effect
where COMMAND was previously defined like this:
COMMAND= 06 02 00 01 !1 !0 $f $d0005; |
SPU
Joined: Feb 07, 2007
Posts: 131
From: Russia, SPb
PM |
leadtek81
http://nwamdclub.nktb-kristall.ru/camdriver0.dat
http://nwamdclub.nktb-kristall.ru/camdriver_spu_1_3_b2.rar
http://nwamdclub.nktb-kristall.ru/camdriver_spu_1_3_b2.zip
F-Lexx
It's just starts from 0 (Zoom 1.0) and ends with 30 (zoom 4.0), so everything after Zoom 1.4 is nonstandart. Or there is nothing on Zoom 1.5 - 4.0?
W800i CID36 R1BD001 |
leadtek81
Joined: Sep 05, 2006
Posts: 3
PM |
10x SPU |
|
|
Posted: 2007-05-15 20:48
