Esato

Forum > Sony Ericsson / Sony > Software, Firmware and Drivers > W810 Firmware Details and Bugs

Previous  123 ... 212223 ... 434445  Next
Author W810 Firmware Details and Bugs
joecool
W810 black
Joined: Sep 04, 2003
Posts: 57
PM
Posted: 2006-08-05 20:29
Reply with quoteEdit/Delete This PostPrint this post
I just wanted to leave an update on my issue. Wotanserver contacted me within an hour or two afterward with my login, EVERYTHING went smooth from then on. The davinci code theme crap is gone, flash lite themes work, and amr is enabled. Also its now running the generic firmware for AMERICA_1 region.

Sooo yes, wotanserver is a great service, and the w810 is a kickass phone.
bico
W810 black
Joined: May 19, 2003
Posts: > 500
From: Stockholm, Sweden.
PM, WWW
Posted: 2006-08-05 21:52
Reply with quoteEdit/Delete This PostPrint this post
Quote:
On 2006-08-03 10:13:45, DIFference wrote:
Question: Have anyone noticed that the siglan goes up and down lot? Maybe it is just my appartment. Or meybe som bug in the firmware I have? I have noticed that the phone is sensitive, it shows every little change in signal.



Yes, I have. I think it has something to do with Telia. When I am abroad, in Greece or Spain for example, the signal meter normally hardly moves at all.

_________________
/bico
http://bico.se

[ This Message was edited by: bico on 2006-08-05 20:55 ]
night_66
W980
Joined: Jul 29, 2005
Posts: 202
From: Sweden
PM
Posted: 2006-08-06 04:45
Reply with quoteEdit/Delete This PostPrint this post
Hi all

I heard there is newer version for W810 than R4DB005 in SEUS or Service points .. is it true ?
kenjibatusai
Xperia X10 Mini Black
Joined: Nov 05, 2004
Posts: 148
From: Colombia
PM
Posted: 2006-08-06 15:25
Reply with quoteEdit/Delete This PostPrint this post
hi I'm in Colombia and my SW info is this:

R4CK003
PRGCXC1250316_GENERIC_HN R4CK003

And SEUS says that I have the latest firmware BTW it is with COMCEL (operator) and the only branding that it had was a wallpaper (that I deleted immediately) and a bookmark to the operator's site

How can this be happening???

TIA
X10 mini
DIFference
W810 black
Joined: Nov 28, 2004
Posts: 41
PM
Posted: 2006-08-06 18:06
Reply with quoteEdit/Delete This PostPrint this post
Quote:

On 2006-08-05 15:23:23, BobaFett wrote:
The reception could be stronger and weaker time to time, thatswhy the bars are moving. I might be wrong, but maybe the radio apart has a bug or u need a fw upgrade.



This message was posted from a WAP device




Yeah, it seem som. As I said, i have strange signal in my appartment.

I have the latest firmware. But if there was a bug in the radio part, it feels like it should show more regularly?

[ This Message was edited by: DIFference on 2006-08-06 17:07 ]
DIFference
W810 black
Joined: Nov 28, 2004
Posts: 41
PM
Posted: 2006-08-06 18:10
Reply with quoteEdit/Delete This PostPrint this post
Quote:

On 2006-08-05 21:52:45, bico wrote:
Quote:
On 2006-08-03 10:13:45, DIFference wrote:
Question: Have anyone noticed that the siglan goes up and down lot? Maybe it is just my appartment. Or meybe som bug in the firmware I have? I have noticed that the phone is sensitive, it shows every little change in signal.



Yes, I have. I think it has something to do with Telia. When I am abroad, in Greece or Spain for example, the signal meter normally hardly moves at all.

_________________
/bico
http://bico.se

[ This Message was edited by: bico on 2006-08-05 20:55 ]



I guess it is. Outside is never a problem, except for at areas with known bad siglnal. Some guy said that w810i have had a lot of problems with bad radio parts, so that people have had to send them in on the warranty. But if that is the problem then the signal should be unstable when the phone lying still on a spot i think.

Is it common that small areas like 10x10x10 cm can have much lower signal than just outside that area?

[ This Message was edited by: DIFference on 2006-08-06 18:46 ]
docmagoo2
K800 Black
Joined: Nov 10, 2005
Posts: 52
PM
Posted: 2006-08-06 23:54
Reply with quoteEdit/Delete This PostPrint this post
have noticed the signal go up and down quite a bit on o2 uk too. SOmetimes have no signal when others do on same network in same area
DIFference
W810 black
Joined: Nov 28, 2004
Posts: 41
PM
Posted: 2006-08-07 11:02
Reply with quoteEdit/Delete This PostPrint this post
Quote:

On 2006-08-06 23:54:36, docmagoo2 wrote:
have noticed the signal go up and down quite a bit on o2 uk too. SOmetimes have no signal when others do on same network in same area



I wonder if it is a W810i issue or if it just is that it has very sensitive monitoring of the signal.
wozza
P910
Joined: May 22, 2003
Posts: 168
From: Lancs, UK
PM, WWW
Posted: 2006-08-07 15:32
Reply with quoteEdit/Delete This PostPrint this post
I have a w810i on o2 uk, often when receiving calls from people the phone's screen will go white for a few seconds or just show the background for a while before showing the incoming call alert. The phone will also randomly reboot when i try to make calls

This message was posted from a WAP device

bico
W810 black
Joined: May 19, 2003
Posts: > 500
From: Stockholm, Sweden.
PM, WWW
Posted: 2006-08-07 18:45
Reply with quoteEdit/Delete This PostPrint this post
What firmware version does your phone have?
wozza
P910
Joined: May 22, 2003
Posts: 168
From: Lancs, UK
PM, WWW
Posted: 2006-08-08 01:03
Reply with quoteEdit/Delete This PostPrint this post
R4CE012

This message was posted from a WAP device

bico
W810 black
Joined: May 19, 2003
Posts: > 500
From: Stockholm, Sweden.
PM, WWW
Posted: 2006-08-08 20:10
Reply with quoteEdit/Delete This PostPrint this post
Ok. As far as I know that particular firmware version should (normally) not cause the problems that you describe.

But an upgrade would (probably/hopefully) not hurt. Go for R4DB005.

Good luck!
glorfingal
Xperia X10 Black
Joined: Jun 10, 2006
Posts: > 500
From: Bristol,UK
PM
Posted: 2006-08-08 21:22
Reply with quoteEdit/Delete This PostPrint this post
had r4ce012 on my o2 810i orginally and only suffered from the light flashing
after it had been on for a while (30 to 60 seconds), but no call problems.
Went via wotanserver to r4db005 and light problem gone away and if any-
thing the signal is more stable - usually 4 to 5 bars all the time.
I reject your reality and substitute my own.
Morpheus
W810 black
Joined: Sep 01, 2002
Posts: 24
From: Nottingham, UK
PM
Posted: 2006-08-09 01:58
Reply with quoteEdit/Delete This PostPrint this post
FYI I updated to R4DB005 via SEUS on O2 UK last week. CDA 102494/56 R2A cxc1250324 Europe_2. The OTA (over the air) update reports R4CE012 as being the latest on O2 so you have to update via a PC.

I wish they would sort out the OTA update service as the option is a bit misleading if it always reports whatever firmware you have installed as the latest.

Morpheus
--
Phone History:-
Motorola Monte Carlo (CD920), Motorola L7089, Motorola V50, SE T68i, SE Z600, Samsung D500, SE W810i
Operator: O2 UK
eskay
T68 gold
Joined: Jun 03, 2004
Posts: 166
From: Sam king
PM
Posted: 2006-08-09 05:17
Reply with quoteEdit/Delete This PostPrint this post
I have the latest version w810 and everything works great its original unbranded .

This message was posted from a WAP device

Access the forum with a mobile phone via esato.mobi
Previous  123 ... 212223 ... 434445  Next
Goto page:
Lock this Topic Move this Topic Delete this Topic