Esato

Forum > Sony Ericsson / Sony > Software, Firmware and Drivers > Hybrid Camera Driver for W800i/K750

Previous  123 ... 207208209 ... 307308309  Next
Author Hybrid Camera Driver for W800i/K750
marcpogs
W800
Joined: May 26, 2004
Posts: 89
PM
Posted: 2006-10-02 15:59
Reply with quoteEdit/Delete This PostPrint this post
hi tory!

I think e-man's 3.1 can do better macro shots than 5.5 in my opinion.

I am just waiting for the camdriver being tested by askd and his testers.
Andeo
K750
Joined: Sep 14, 2006
Posts: 52
From: Russia, Ekaterinodar
PM, WWW
Posted: 2006-10-02 16:04
Reply with quoteEdit/Delete This PostPrint this post
Analisis camera driver version 3.1:

seq_init=05 02 00 0B 90 #CMD_END 05 02 00 0C 07 #CMD_END
06 02 00 01 00 52 #CMD_END
05 02 00 18 00 #CMD_END
06 02 00 01 03 56 #CMD_END

06 02 00 01 04 56 #CMD_END
06 02 00 01 01 55 #CMD_END
#GET_SENSOR_VERSION;

Two equal parametrs of sharpness.
One set sharpness to 3 and other set it to 4. Nice.
It's real knowhow!
Probably therefore ToryXX said that it super good?
Interesting...
Do you magician Erzan?

Other line so interesting:
seq_set_prop_0=$s0 %0 $-0 0a $b0 00 5 3 06 02 00 01 $w0 06 #CMD_END;
Command $b0 00 5 3 is unnecessary...
Original driver version 5.3 does't have something similar.
Is it line from W900?
Andeo
K750
Joined: Sep 14, 2006
Posts: 52
From: Russia, Ekaterinodar
PM, WWW
Posted: 2006-10-02 16:07
Reply with quoteEdit/Delete This PostPrint this post
Recruit, some information for you:

$c0 01 id number for size 100 x 60 -- don't used
$c0 02 id number for size 160 x 120 -- used
$c0 03 id number for size 320 x 240 -- don't used
$c0 04 id number for size 640 x 480 -- used
$c0 05 id number for size 1280x 960 -- don't used
$c0 06 id number for size 1600x1200 -- don't used
$c0 07 id number for size 1632x1088 -- don't used
$c0 08 id number for size 1632x1224 -- used
ToryXX
W960
Joined: Aug 11, 2006
Posts: 495
From: Germany
PM, WWW
Posted: 2006-10-02 16:15
Reply with quoteEdit/Delete This PostPrint this post
andeo what is this with all comands...what you whant to show us????
ToryXX
W960
Joined: Aug 11, 2006
Posts: 495
From: Germany
PM, WWW
Posted: 2006-10-02 16:18
Reply with quoteEdit/Delete This PostPrint this post
andeo your cam driver 5.5a (special for r1bc) is very good ,realy because i test it now but ,yesterday in the evening when i test it ,was very hard to take a picture in the evening......i musted 10 seconds to wait till the picture was ready ....if you understand me....and if i don't wait ,then after this everything is blury
Andeo
K750
Joined: Sep 14, 2006
Posts: 52
From: Russia, Ekaterinodar
PM, WWW
Posted: 2006-10-02 16:27
Reply with quoteEdit/Delete This PostPrint this post
I made some bit changes in 5.5a and 5.5b.
It's no more blurry!
Now it really true colors.
Check it themselves.

PS: sorry for old version, I don't rework it a tiny bit...


Rapidshare links:
Version 5.5UA (Only for R1N035/R1AA008/R1BC002 firmware)
http://rapidshare.de/files/35221188/camdriver_v5.5UA.zip.html

Version 5.5UB (Only for R1СА021/R1DB001 firmware)
http://rapidshare.de/files/35221207/camdriver_v5.5UB.zip.html


Filefactory links:
Version 5.5UA (Only for R1N035/R1AA008/R1BC002 firmware)
http://www.filefactory.com/file/6e5f1f/

Version 5.5UB (Only for R1СА021/R1DB001 firmware)
http://www.filefactory.com/file/cabac3/
ToryXX
W960
Joined: Aug 11, 2006
Posts: 495
From: Germany
PM, WWW
Posted: 2006-10-02 16:31
Reply with quoteEdit/Delete This PostPrint this post
Quote:

On 2006-10-02 16:27:02, Andeo wrote:
I made some bit changes in 5.5a and 5.5b.
It's no more blurry!
Now it really true colors.
Check it themselves.

PS: sorry for old version, I don't rework it a tiny bit...


Rapidshare links:
Version 5.5UA (Only for R1N035/R1AA008/R1BC002 firmware)
http://rapidshare.de/files/35221188/camdriver_v5.5UA.zip.html

Version 5.5UB (Only for R1СА021/R1DB001 firmware)
http://rapidshare.de/files/35221207/camdriver_v5.5UB.zip.html


Filefactory links:
Version 5.5UA (Only for R1N035/R1AA008/R1BC002 firmware)
http://www.filefactory.com/file/6e5f1f/

Version 5.5UB (Only for R1СА021/R1DB001 firmware)
http://www.filefactory.com/file/cabac3/



the sharpeness is still existing yes?
ilabstudios
W880 Black
Joined: Mar 03, 2006
Posts: 213
From: London, UK
PM, WWW
Posted: 2006-10-02 16:34
Reply with quoteEdit/Delete This PostPrint this post
5.5A is alot sharper from what I gathered and colour is more vibrant and true. With 5.5B I found when taking photos that contain white it had a tinge of blue but with the 5.5A the white stayed true with no blue tint.

k750 r1ca021/w800 r1bc002|2gb msdp|menu tweak|new displaydriver/e_erzan 5.6c camdriver|w810 acoustics|playlist|no sim setup|blutooth patch|remove keylock/nosound/volume msg and many more
http://filelodge.bolt.com/profile/ilabstudios
aksd
Z610 Black
Joined: Nov 11, 2005
Posts: > 500
From: UK, India
PM, WWW
Posted: 2006-10-02 16:38
Reply with quoteEdit/Delete This PostPrint this post
Quote:

Other line so interesting:
seq_set_prop_0=$s0 %0 $-0 0a $b0 00 5 3 06 02 00 01 $w0 06 #CMD_END;
Command $b0 00 5 3 is unnecessary...
Original driver version 5.3 does't have something similar.
Is it line from W900?



That line is present in a backup I took of the 5.3 camdriver from R1CA K750. I wonder why? The phone was untocuhed, un modded etc.

Andeo what exactly is $b, also I do not think you should touch Q-Table settings.

Are you using a translator?

Regards,
Akshay
ap0lo
K790
Joined: Nov 19, 2005
Posts: 116
From: Brazil
PM, WWW
Posted: 2006-10-02 16:38
Reply with quoteEdit/Delete This PostPrint this post
And what firmware are you on Ilabstudios ?

You have to use 5.5 a OR 5.5b depending on which firmware you have.
=)
Andeo
K750
Joined: Sep 14, 2006
Posts: 52
From: Russia, Ekaterinodar
PM, WWW
Posted: 2006-10-02 16:43
Reply with quoteEdit/Delete This PostPrint this post
Quote:

On 2006-10-02 16:15:09, ToryXX wrote:
andeo what is this with all comands...what you whant to show us????


I just wanna help Erzan and Aksd correct some mistakes.
They are a very good developers.
gxg
K750
Joined: Nov 11, 2005
Posts: 270
From: Romania
PM
Posted: 2006-10-02 16:48
Reply with quoteEdit/Delete This PostPrint this post
i read a little these rusian forums... with bearly translated text in english .. (as I said to den_po: now i regret not to chosing russian as my seccond language in school).

It's painfull and i need to focus @ every post because the translations su*s.

I can say that you are the best in bussines for the moment.

maybe you can make some IMPORTANT threads in english too. because hole world can learn from there... but it's almost imposible due to translation errors.

Anyway.. what andeo is tryn to say is that YOU MESS WITH WRONG PARAMETERS.

and he's wright. now that he post the I2C commands..i can understand why.

Andeo.. can you increase the sharpnes in that driver? I think sharp is very strong in the centre of picture, but it's decreasing on extremity's. And in night mode with some suficient light (i put night mode in order to evoid the choke) the pictures are a little blue-iss - like a color filter was sudden applied. But for the claritness... it's ok...

Congrats.. i saw purple on my pictures... Now this is a breakthru in here
e_erzan
K850 Green
Joined: Aug 04, 2006
Posts: > 500
From: Singapore,Tanglin
PM
Posted: 2006-10-02 16:49
Reply with quoteEdit/Delete This PostPrint this post
Ver 3.1 with help from andeo
http://www.filefactory.com/file/a52386/
K850i(R1EA037)2GB Kingston MicroSD
Sony Ericsson Camera phones evolutions for me=>S700i(1.3m)=>K750i(2.0m)=>K800i(3.2m)=>Present K850i(5.0m)
Camera phone will never replace a camera,but at least i carry lesser things with me coz i have my
Andeo
K750
Joined: Sep 14, 2006
Posts: 52
From: Russia, Ekaterinodar
PM, WWW
Posted: 2006-10-02 16:50
Reply with quoteEdit/Delete This PostPrint this post
Quote:

, also I do not think you should touch Q-Table settings.
Regards,
Akshay


I don't change Q-Table settings, only design...
Quote:

Are you using a translator?


Yes I using it sometimes.
Quote:

Andeo what exactly is $b


Give me some time.
chling
T68 gold
Joined: Sep 02, 2006
Posts: 11
PM
Posted: 2006-10-02 16:50
Reply with quoteEdit/Delete This PostPrint this post
problem pictures from 2.441

a,some bright white place appear 'blue'
b,some obvious lines on the photo sometimes

and finally what do you think of these photos? should I keep using this driver?


a,
b,

[ This Message was edited by: chling on 2006-10-02 15:52 ]
Access the forum with a mobile phone via esato.mobi
Previous  123 ... 207208209 ... 307308309  Next
Goto page:
Unlock this Topic Move this Topic Delete this Topic