| Author |
Super camera driver for k750/w800/w810 |
fezzo
Joined: Apr 01, 2007
Posts: 20
PM |
@deadball @cassanova
aku di jogaj  pada pake camdrive apa nih? aku sih pake 21.91 hasilnya di w810 paling bagus menurut aq. |
|
|
SPU
Joined: Feb 07, 2007
Posts: 131
From: Russia, SPb
PM |
Raiderski
1. May be i can't make such photos (with the lower quality value) =)))
So after all i have only one question: if the cammodule is so clever to reduce the quality if it goes out of the size limit why we can't set quality to 100% and live without crashes? =) I know the answer, but this didn't help. And i know how to get a really fixed quality, but this is not a good idea, because it will produce too many crashes.
2. You are right about sharpness, i'll change it back to 04, but... my driver is very flexible, anyone can adjust it for themself without any knowledge of programming. That's why i made the config section. Anyone can make their own settings and just copy paste this config from older version of a driver to a new one. You only need to check a driver for a new options and don't overwrite them.
3. I'm also a programmer with an experience (15 years of programming starting from Zilog Z80 asm and so on) 
Btw, there is no term "quality" in JPEG standart. So the the utility you're linked gives only some approximation in it's own way... which isn't connected with the quality in the driver and the last one uses "nonstandart" quantization tables. I quoted "nonstandart", because there is only recommended examples of this tables in the official documentation.
Did you ever try to change quantization tables in the driver?
PS: PM is a good place for discussion =)
[ This Message was edited by: SPU on 2007-05-13 11:45 ] |
amon'
Joined: May 10, 2007
Posts: 8
PM |
guys, i would like you to stay and discuss here, because some of us can learn something new with it and use it in further. think about all the noobs, and let them become men finally. |
Raiderski
Joined: Jul 03, 2006
Posts: > 500
From: Poland, Hell, Mountains
PM, WWW
|
@amon'
ok as you wish. everyone is here for everyone  SPU check that (this is behaviour about which i mentioned in PM)
i was trying to make high detailed snapshot...
1. snapshot - crash
2. snapshot - crash
3. snapshot - crash
4. snapshot - crash
5. %@#*&$?!
6. completly different low detail snapshot - success
7. high detail snapshot (without camera restart after [6]) - success
8. again (without cam restart) high detail snapshot - success
9. again (without cam restart) high detail snapshot - success
miracle after low detail snapshot? definetly yes, and the best one... this sh!t works almost (80% cases) every time when i have problem with crashes with too much tuned driver :/
|
SPU
Joined: Feb 07, 2007
Posts: 131
From: Russia, SPb
PM |
Raiderski
This is not working for me. If it crashes it crashes in any case... I use a macro shot of LCD display with a lot of text to test. |
Rossini
Joined: May 13, 2007
Posts: 1
PM |
Paparazy eu sei que vc é brasileiro e entendi desse negocio de modificar driver,queria te pedir um grande favor sera que vc poderia modificar esse driver para mim é de uma cam Vga do w300i se possivel abilitar o zoom na foto grande e se der pra melhorar alguma coisa na qualidade blz tbm aí vai o link para vc fazer o download do driver original do w300i http://www.4shared.com/file/15842141/6e1bdecf
se der para me mandar o driver depois que vc modificar meu e-mail é aldo-rossini@hotmail.com
flw irmão! |
biasiman
Joined: Mar 27, 2006
Posts: 80
PM |
Hi I'm impressed by 21.91 driver but I wonder how it would be retaining the "zuza mistake" for lower pics size. I was using Mladen 9.01(with zuza mistake) and I can get the same enanched pictures with about 2/3 pic size. The real advantage for me is that 21.91 does enanched pics automatically and it is right most of the time but I'm not convinced that setting jpeg compression to 87% makes better pics than zuza approach as in some dark areas(expecially on brown) I've the same little horizontal lines with both drivers... (perhaps I could try to change compression lines with zuza's ones myself and see what happens) |
Raiderski
Joined: Jul 03, 2006
Posts: > 500
From: Poland, Hell, Mountains
PM, WWW
|
@SPU
i forgot to tell that if you pump % too much then it won't work it works for me at 91%
|
F-Lexx
Joined: May 09, 2007
Posts: 163
From: Romania
PM |
On 2007-05-13 01:09:20, Raiderski wrote:
@SPU
hmm... doesn't work on mine R1BD001 (after camera open it is closed immediately) :/ i will look closer to this tommorow... need sleep... bzzz... bzzz...
SPU 1-3-b2 did the same to me on a K750i with W800i R1BC002 firmware.. The camera was closing as soon as i was trying to open it. I tried to put another driver instead (Sarmad's 4.81) but id did the same, and after that i had an error while patching the phone (i'm using XS++ and it's FSX feature, but i've never had an error using it) and the phone died ) I had to reflash the Main and now it works.
[ This Message was edited by: F-Lexx on 2007-05-13 15:39 ] |
alirrp
Joined: Apr 18, 2007
Posts: 12
PM |
In the name of god
Drive maker read only !
I think u can make any drive but u don’t know which is best so I suggest this drive:
This is just idea not camdrive (yet !)
Effect menu ==> all cc mode (change sharpness, brightness, Saturation)
- Off => cc off
- B & W => cc vivid
- Negative => cc k800 kopritis
- Sepia => cc sarmad
- Solarize => manual cc
o Ev -0.7 = sharpness (1.0 4.0 )
o Ev -0.3 = brightness(1.0 4.0 )
o Ev 0.0 = Saturation (1.0 4.0 )
o When we select manual cc joystick and +/- use for this mode until we press half shatter and save selection to manual cc.
White balance menu
- Auto
- Day light manual WB
o When we select manual WB it waits change color in center to white when its ok press half shatter to save and M WB remained until we select it in menu again
- Cloudy
- Fluorescent
- Incandescent
Picture quality menu
- Normal
- Fine active reduction noise filter in high iso and high exposure
In mod I still add manual mod replace day night mod
On night mod => nmanual mod
- VE used for change iso (-2.0 2.0 ) iso(80 1600)
- +/- key use for exposure time (1.0 4.0 ) exposure ( 1/6400 2s)
- For manual focus , focus in anther mode then back to manual mod
• Manual WB is very important because when we have just two color in pic automatic WB mistake.
• Can any body make filter for reduction noise of high iso?
• In high exposure we have noise too because of bad pixel in sensor or dust some of reduction noise filter take a photo whit close shutter presently after the original photo to find the light pixel and correct in original photo. But it used in mechanical shutter in this camera we want take a photo when the cover closed and use of all reduction noise algorithm.
• Is any correction for shaky photo in high exposure time? What is the Flicker correction?
• I think zoom and spot is unuseful
• I think the 2 s for maximum exposure is not hardware limit and relation the main FW because in 1.3 spu in 4.0 for exposure time I see photo in monitor but when take camera fail .can any body make path to unlimited it?
• Dose cc like vivid overlap to WB?
• I like exact auto focus and manual focus whit preview zoom like kriomag drives
If u can't make this drive plz learm me how u make drive I try it.
Thanks to read all
[ This Message was edited by: alirrp on 2007-05-14 12:06 ] |
F-Lexx
Joined: May 09, 2007
Posts: 163
From: Romania
PM |
After reflashing the Main, I patched the FS with better acoustics and I gave SPU's 1.3.b2 another chance, but it gave me the same error as before.. The patching went with no errors, I'm sure of that. The acoustics work as expected, however the camera won't open (it closes as soon as try to open it).
The funny thins is that after installing SPU's 1-3-b1, the camera works again. I guess the b2 just isn't made for me... |
deadball
Joined: Apr 17, 2007
Posts: 20
PM |
On 2007-05-13 16:39:48, alirrp wrote:
In the name of god
Drive maker read only !
I think u can make any drive but u don’t know which is best so I suggest this drive:
This is just idea not camdrive (yet !)
Effect menu ==> all cc mode (change sharpness, brightness, Saturation)
- Off => cc off
- B & W => cc vivid
- Negative => cc k800 kopritis
- Sepia => cc sarmad
- Solarize => manual cc
o Ev -0.7 = sharpness (1.0 4.0 )
o Ev -0.3 = brightness(1.0 4.0 )
o Ev 0.0 = Saturation (1.0 4.0 )
o When we select manual cc joystick and +/- use for this mode until we press half shatter and save selection to manual cc.
White balance menu
- Auto
- Day light manual WB
o When we select manual WB it waits change color in center to white when its ok press half shatter to save and M WB remained until we select it in menu again
- Cloudy
- Fluorescent
- Incandescent
Picture quality menu
- Normal
- Fine active reduction noise filter in high iso and high exposure
In mod I still add manual mod replace day night mod
On night mod => night mod
- VE used for change iso (-2.0 2.0 ) iso(80 1600)
- +/- key use for exposure time (1.0 4.0 ) exposure ( 1/6400 2s)
- For manual focus , focus in anther mode then back to manual mod
• Manual WB is very important because when we have just two color in pic automatic WB mistake.
• Can any body make filter for reduction noise of high iso?
• In high exposure we have noise too because of bad pixel in sensor or dust some of reduction noise filter take a photo whit close shutter presently after the original photo to find the light pixel and correct in original photo. But it used in mechanical shutter in this camera we want take a photo when the cover closed and use of all reduction noise algorithm.
• Is any correction for shaky photo in high exposure time? What is the Flicker correction?
• I think zoom and spot is unuseful
• I think the 2 s for maximum exposure is not hardware limit and relation the main FW because in 1.3 spu in 4.0 for exposure time I see photo in monitor but when take camera fail .can any body make path to unlimited it?
• Dose cc like vivid overlap to WB?
• I like exact auto focus and manual focus whit preview zoom like kriomag drives
If u cant make this drive plz learm me how u make drive I try it.I
Thanks to read all
nice combine bro.... krio,sarmad,kopri,paparazz,SPU we waiting for u |
paparazy
Joined: Dec 04, 2006
Posts: 239
PM |
Camdriver PaParazy v1.70 k750/w800/w810
Download 3 mirrors: http://www.esato.com/board/viewtopic.php?topic=147234&forum=17
// Update 3: Saturation Colors 6 (SPU), full removed green!
// by paparazy compatible k750 red cid49 r1db001:add Color correction, add AE, fix slow enhanced, fix time green night cid49 red, add sharpness, small jpg size, led wb auto
##Guide## (folder sound/Display tunned)
Macro mode = Manual Focus (use zoom keys to select focus) 1.0:autofocus, 1.1:infinity, 1.2-4.0 manual
Macro + Night = Enhanced Night Mode (longer exposure, very low noise), Manual focus (as described above)
Normal mode = Smooth Zoom
VIDEO RECORDING: Normal 15fps, EnhancedNight 5fps
Normal mode with Macro has same quality but with Manual Focus
EnhancedNight mode has Manual Focus with zoom keys |
Raiderski
Joined: Jul 03, 2006
Posts: > 500
From: Poland, Hell, Mountains
PM, WWW
|
@alirrp
"I think zoom and spot is unuseful"
zoom - agree
spot - definetly useful if you know how to use it
|
paparazy
Joined: Dec 04, 2006
Posts: 239
PM |
Boa tarde amigo
Já verifiquei e é como imaginava seu driver é totalmente diferente dos modelos que usamos... ou seja você mesmo teria que alterar.. testar (nos hackeamos fazendo testes sempre...)
uma idéia! use o XS++ e converta seu celular para o k750 (firmware) se possível... pelo que sei já converteram o k700 em w800...
mas cá entre nos que deus lhe ajude... risos
Ajuda enhanced night abaixo:
LedEM= $p1 07
$c1 01
05 01 00 23 01 $f $r2 1 1
$m0 1 $/0 28
$c0 00
$m0 1 $/0 03
$c0 00
$cl
$s0 35 $-0 r1 // fix PaParazy
06 02 00 01 $w0 04 #CMD_END
$cx
$cx
$cl
05 01 00 23 01 $f $r2 1 1
$m0 1 $/0 28
$c0 00
$m0 1 $/0 03
$c0 00
$cl
$s0 35 $-0 r1 // fix PaParazy
06 02 00 01 $w0 04 #CMD_END
$cx
$cx
$cx;
EM= $p1 0d
$c1 00
$p1 0e
$c1 00
05 01 00 23 01 $f $r2 1 1
$m0 1 $/0 28
$c0 00
$m0 1 $/0 03
$c0 00
$cl
$s0 39 $-0 r1 // fix PaParazy
06 02 00 01 $w0 04 #CMD_END
$cx
$cx
$cx
$cx;
ENHANCED_SHOT=$c7 00
$s7 01
#EMPTY_EVENT_FIFO
#COLOR_COR
$z0 $-0 re
06 02 00 01 01 01 #CMD_END // fix paparazy
$c0 00
06 02 00 01 01 01 #CMD_END
$cl
$p0 0d
$c0 01
$p0 01
$c0 00
#LED_WB_SET
#LedEM
$cx
$cx
#EM
06 02 00 01 01 $ze
$ce 09 33 $cl 32 $cx $f
#WAIT_FOR_MODE_TRANSITION
#WAIT_FOR_CAPT_START
$cx
$t0020
$cx;
seq_ss_take= $p2 09
$c2 00
#DEFAULT_SHOT
$cl
#ENHANCED_SHOT
$cx
$s6 00;
On 2007-05-13 14:45:02, Rossini wrote:
Paparazy eu sei que vc é brasileiro e entendi desse negocio de modificar driver,queria te pedir um grande favor sera que vc poderia modificar esse driver para mim é de uma cam Vga do w300i se possivel abilitar o zoom na foto grande e se der pra melhorar alguma coisa na qualidade blz tbm aí vai o link para vc fazer o download do driver original do w300i http://www.4shared.com/file/15842141/6e1bdecf
se der para me mandar o driver depois que vc modificar meu e-mail é aldo-rossini@hotmail.com
flw irmão!
|
|
|
Posted: 2007-05-13 10:48
