| Author |
msi usb bluetooth key (MS-6967) |
phroz3n
Joined: Feb 27, 2002
Posts: 28
From: Cyprus
PM, WWW
|
I got the latest software and upgraded to the latest firmware. I paired my phone with the thing and added a serial connection port 1 on virtual com port 5. However when i run FMA and set it on port 5 max speed and the 2 other options disabled and i try to connect the serial connection in My Bluetooth Places is disconnected and FMA doesnt connect! I dont understand what the hell im supposed to do! Help! |
|
|
Funky-Fish
Joined: May 17, 2002
Posts: 23
PM, WWW
|
ok here is the deal: i just got the MSI usb bluetooth key (MS-6967) .
First of all i got to say that i dont have a clue in configuring this device ( i tryed to configure it as shown @ the pamplet.... no good)
Second, i have thses problems:
my MSI is installed correctlly ( as shown by the Device manager )
1) my computer does not find my T68i even though that the T68 is in " Discoverable mode" , in the "Add a bluethooth place" wizard.
2) my T68i DOES find the computer but i cant send/recive any files or data....
3) when they both find each other (not all the time) i cannot setup a "File Transfer" connection to my T68i , all i can setup is a "Serial Port" connection. when i do so, my devices could be connected but when they are connected, i cant do any thing ( cannot Send/Recive files...)
where did i go wrong? is the "Serial Port" connection is good enough to transfer data? or i could do so only when i setup a "Transfer Files" account??
plz help me out, i cant wait to work with it!!
thnx alot,
Liron
OK, hot news:
when i go to the BT icon at the task bar (near the computer clock) and right click it, going to "Services" and than goto "File transfer" and than to "Find devices" it does find my T68 but after a few seconds a msg pops up,the title is: "BTTray" and in the msg is writen: "Service File Transfer is not found on the device T68" .....what is that mean?
[ This Message was edited by: Funky-Fish on 2002-09-09 17:33 ] |
619
Joined: Jun 19, 2002
Posts: > 500
From: if you dont like my posts, IGN
PM |
U cannot transfer file using msi n t68. What u shld do is to download softwares like SE MYPICTURE for file transfer and package 3 of se to be used together with mypic or FLOAT MOBILE AGENT for sms sending and recieving.. U can use ur msi n t68 for gprs connection, just look for the dial-up
This post was posted from a T68i |
619
Joined: Jun 19, 2002
Posts: > 500
From: if you dont like my posts, IGN
PM |
The transfer file of msi is to be used to transfer files between 2 msi equipt computers
This post was posted from a T68i |
Funky-Fish
Joined: May 17, 2002
Posts: 23
PM, WWW
|
Well i guess im just that dumb......
Could some1 plz help me out with this 1?
OK, i have formated my Computer..... now what? should i install the Software that came with the MS-6967 ? or should i use another program? or should i install them both?
my main interest is to Download Themes and ring tone to my T68i from my Computer Via that BT device....
im not that good with those things so i hope that some1 will have enough patience for me ( dont worry i get things fast.. ).
All i need is a step by step instructions in plain English (not like that shitty pamplet i got with my device cause i didnt understand nothing from there......)
thnx alot i really apretiate this....
619 : thnx for the explanation!! but i didnt understood much , i mean, i havent found that Floating Mobile Agent, and the MYPICTURES program didnt even found my BT device....but thnx for the effort!!! |
GOwin
Joined: Jan 17, 2002
Posts: > 500
From: .uʍop ǝpısdn s&
PM, WWW
|
@619 re file transfer. That's inaccurate. File transfer can be done with other bluetooth devices that support ftp - not limited to msi only.
This post was posted from a T68i |
Funky-Fish
Joined: May 17, 2002
Posts: 23
PM, WWW
|
GOwin : any idea how can i d/l themes to my Cell? what soft. would i need, what about the supplied drivers and soft. by MSI ? and how can i actually do this? |
funks
Joined: Aug 28, 2002
Posts: 162
From: Nandoon, Sa Tabe
PM, WWW
|
Quote:
|
On 2002-09-10 00:13, Funky-Fish wrote:
GOwin : any idea how can i d/l themes to my Cell? what soft. would i need, what about the supplied drivers and soft. by MSI ? and how can i actually do this?
|
|
You need a stack that supports OBEX (object exchange).. It's currently not fully supported in the WidCOMM stack. |
GOwin
Joined: Jan 17, 2002
Posts: > 500
From: .uʍop ǝpısdn s&
PM, WWW
|
@Funky-Fish
I use Float's Mobile AGent's (FMA) upload facility, and have also tried the sendfile utility from christersson.org.
The FMA can be downloaded from eflame.com/fma (there's also an existing thread at the software forum about FMA.
Christersson's website is www.christersson.org . see the software section. |
K3|
Joined: Aug 29, 2002
Posts: 12
From: Manila, Philippines
PM |
sup!
m gonna get my msi bt today! yey! is there any checklist for this one for a smooth and flawless operation? i.e. (install r4a packge...etc.) or sumtyn like wat is funky fish is askin you guys.
@gowin,
tnx for ur help and welcomin' me here in esato bro!
 ... I LIKE! |
619
Joined: Jun 19, 2002
Posts: > 500
From: if you dont like my posts, IGN
PM |
i use sony ericsson's MYpicture to transfer themes, edited pics from pc to t68. of course, SE mypic needs the MPM w/c is included in the r3a software. .. all can be found at the software topic.. |
Funky-Fish
Joined: May 17, 2002
Posts: 23
PM, WWW
|
GOwin: THNX for the soft.!!! really seams like a good 1! but hellz, i cant get my devices paird.... nothing aint finding nothing.....when i do a serach from the computer, he is not finding my Cell, and when i do from the Cell he is not finding the computer.... (i didnt forgot to put the Cell on "Discoverable" ).
i dont know what to do.... i am sooooo frustrated.... (usually i aint the suck with electric devices and stuff....) |
GOwin
Joined: Jan 17, 2002
Posts: > 500
From: .uʍop ǝpısdn s&
PM, WWW
|
hmm ... have you verified if your adapter is working? (the blue LEDs should be blinking. If it isn't, just pull it out and put it back again. There's an issue about MSI-6967 adapters not working properly if they're inserted while the PC is booting up, maybe you should take note of that)
|
619
Joined: Jun 19, 2002
Posts: > 500
From: if you dont like my posts, IGN
PM |
or reboot your phone, sometimes the bt of t68 is not functioning well. |
Funky-Fish
Joined: May 17, 2002
Posts: 23
PM, WWW
|
ok, after booting up like 619 said.. i did manage to pair my devices... now when i go to "My Bluetooth Places" i can see "T68 Serial Port 1"
ok, now what? i got all the programs installed : MPM, MFA, MYPIC ...it seems though that without the SE MPM, nothing could work...so i installed it, but a problem was abserved (WoW!! theres a shock!!), when i try to open the MPM software, it gives me a msg telling: "No Modem with HSCSD Capabilities installed" .... i tryed it in every status : when the connection with my cell is active inactive... every thing he just gimme that msg, and when it goes into the software, everythink is in gray ( Unavailible ) .... |
|
|
Posted: 2002-09-09 14:31
... I LIKE!
