Author |
Tip for cleaning the fastport connector |
rion Joined: May 14, 2009 Posts: 1 PM |
I found the isopropyl alcohol and tootbrush trick worked MUCH better than rubbing the contacts with the lead from a mechanical pencil (which is an appropriately small 0.5mm wide). All working well again with charger and handsfree. But I didn't have any green stuff, which sounds like copper oxide, thankfully. |
|
monbrye Joined: May 08, 2008 Posts: 1 PM |
may I know where to buy spare fastport connectors? or is there any? |
mallaccra Joined: Oct 01, 2007 Posts: > 500 PM |
"Perhaps what mallacra's refering to is probably using a needle to scrape off any residue that may have collected and hardened with humid air in between the pins on the fastport connector. Forgot to mention that works too, may sound a bit brutal but that's how SE technicians get rid of tough residues in between the pins, works like a charm every time"
quoted by mode
give a try, it works 
[ This Message was edited by: mallaccra on 2009-10-09 20:47 ] mallaccra®  Xperia Z2 |D6503|4.4.2|  Xperia Z1 |C6903|4.4.2|  Xperia Z |C6603|4.2.2|  Xperia ZL |C6502|4.2.2|  Xperia TX |LT29i|4.1.2|  Xperia Ion |LT28h|4.0.4|  Xperia P |LT22i|4.1.2|  Xperia J |ST26i|4.1.2|  Aino |
satanic_dude Joined: Oct 12, 2008 Posts: 15 PM |
I use a toothbrush. It works!
satanic_dude |
Kuchiyose Joined: Mar 05, 2010 Posts: 15 PM |
Where is the fastport connector? |
goarthur77 Joined: Apr 17, 2009 Posts: 47 PM |
kuch, it's the charger connector for all se phones.  |
Kuchiyose Joined: Mar 05, 2010 Posts: 15 PM |
Ah, thank you for the info. |
goarthur77 Joined: Apr 17, 2009 Posts: 47 PM |
I use wd40. |
xxambad4fellaxx Joined: Mar 02, 2010 Posts: 124 PM |
thanks for these useful tips!:) |
opexblue Joined: Jan 18, 2006 Posts: 226 From: Manado, North Celebes, INA. PM |
On 2008-10-30 13:30:58, vivicav wrote:
Toothpicks is excellent!
I use that too, until now I never had any problem  |
VLADISLAUS Joined: May 26, 2010 Posts: 176 From: Jogjakarta, ID PM |
I always clean the fastport using like liquid balm or cajuput oil (what is it in english? i said 'minyak kayu putih' in indonesian)
Pour a piece of cajuput oil at the fastport (better use a cotton to put the oil to the fastport) then brush it slowly using toothbrush until they're look shiny
After that, clean the residue of cajuput oil in the phone casing using unused cloth (can make a corrosive if u don't clean it up)
Taraaa... The fastport is now clean
"i guess destiny is not the path given to us.. but the path we choose for ourselves.." -megamind- |
rochel.o8 Joined: May 31, 2010 Posts: 17 From: Caloocan City Philippines PM, WWW
|
Im Using needle.
"I love Walking in the rain, so nobody see me crying"
jHoncEL_04 |
yoyoatw Joined: Jun 07, 2010 Posts: 6 PM |
this is kinda off topic, but this might relate. My phone (w580i) used to connect to my comp fine. Then after a couple months, my computer started giving me this error: "Usb device has malfunctioned" . I tried different computers and different usb cables (all Sony Ericsson brand) , and it gives me the same error. I think its a problem with the fastport connector, will cleaning it make it work again or will i have to replace my phone? |
mriley Joined: Oct 03, 2009 Posts: > 500 From: UK PM |
On 2010-06-07 23:29:44, yoyoatw wrote:
this is kinda off topic, but this might relate. My phone (w580i) used to connect to my comp fine. Then after a couple months, my computer started giving me this error: "Usb device has malfunctioned" . I tried different computers and different usb cables (all Sony Ericsson brand) , and it gives me the same error. I think its a problem with the fastport connector, will cleaning it make it work again or will i have to replace my phone?
It says this all the time for me, just keep re-connecting and try tips here will fix it.
Esato's Newbie of the year and Most Helpful Member 2010!  ------------------- Life is just a ride, enjoy it while you can |
yoyoatw Joined: Jun 07, 2010 Posts: 6 PM |
On 2010-06-08 00:06:03, mriley wrote:
On 2010-06-07 23:29:44, yoyoatw wrote:
this is kinda off topic, but this might relate. My phone (w580i) used to connect to my comp fine. Then after a couple months, my computer started giving me this error: "Usb device has malfunctioned" . I tried different computers and different usb cables (all Sony Ericsson brand) , and it gives me the same error. I think its a problem with the fastport connector, will cleaning it make it work again or will i have to replace my phone?
It says this all the time for me, just keep re-connecting and try tips here will fix it.
thanks man. what specifically did u do to fix your fastport? |
|