| Author |
Super camera driver for k750/w800/w810 |
alirrp
Joined: Apr 18, 2007
Posts: 12
PM |
@SPU
can u link patch for (k750 cid49 red r1bc002) to move camdrive position to other
thx |
|
|
AcidSouL
Joined: Apr 30, 2007
Posts: 18
PM |
On 2007-05-10 00:30:20, sarmadgilani wrote:
Sarmad's 5.6 driver - optimized for W810
based on 4.81 (which is based on 4.5)
special thanks to guguly and Nirodha and everyone else who gave feedback and tested and helped me on this. 
Normal mode = Faster EN/ENM - JPEG 89%
Fine Mode = Slower EN/ENM (lower ISO, more exposure) - JPEG 89%
Improved and Accurate Focus
Good Quality Color correction always on
Improved Sharpness
Auto Exposure Lock
LED white balance defaults to Flourescent for better tint
Fixed bug with white balance in LED ENM
MXE-60 Flash accessory support
Macro mode = Enhanced Mode (slightly longer exposure)
Manual Focus (use zoom keys to select focus)
1.0:autofocus, 1.1:infinity, 1.2-4.0 manual
Macro + Night = Enhanced Night Mode (longer exposure, very low noise)
Manual focus (as described above)
VIDEO RECORDING: Normal 15fps, Night 10fps, EnhancedNight 5fps
Normal mode has Smooth Zoom
Normal mode with Macro has same quality but with Manual Focus
EnhancedNight mode has Manual Focus with zoom keys
************
Download 5.6:
http://www.mediafire.com/?9vjntygkdzv
Download 5.6 Spot Edition
Ssame as 5.6, except Normal mode = JPEG 75% - Spot Off, Fine Mode = JPEG 89%, Spot On.
http://www.mediafire.com/?5vmdmzjma5c
[ This Message was edited by: sarmadgilani on 2007-05-09 23:33 ]
yeahh you are number 1 i try it tomorrow because now ..its... 2:13 am and i am gona sleep 
regards |
paparazy
Joined: Dec 04, 2006
Posts: 239
PM |
new camdriver v1.70 (end) compatible k750 red cid49 R1DB001
*** removed green night photos!!
download Topic: http://www.esato.com/board/viewtopic.php?topic=141735&forum=17 |
stingjoel
Joined: Jan 24, 2005
Posts: 265
From: Indonesia
PM |
@SPU;
How to set your driver like other driver's EM or ENM? which one must I set? please advice, because my setting with your driver always get noise
K750i CID36 R1CA021 APAC. |
kcscm
Joined: May 04, 2007
Posts: 13
PM |
@spu
please tell how to enter into supermode in your driver. |
fezzo
Joined: Apr 01, 2007
Posts: 20
PM |
@sarmadgilani
hei...can u make v.5.6 without CC? i've tried your new driver (5.6), to much red in the dark place. Not real colors 
[ This Message was edited by: fezzo on 2007-05-10 06:13 ] |
chrono[exe]
Joined: Feb 22, 2007
Posts: 7
PM |
@kcscm
heres the description for SPU's driver http://www.esato.com/board/viewtopic.php?topic=135737&p=189 ^^ |
kcscm
Joined: May 04, 2007
Posts: 13
PM |
i read the description when i press <<**<<( starting from ev 0.0). nothing happened . iam unable to see iso value settings. please help me. |
pram_zx
Joined: Mar 02, 2007
Posts: 161
From: NoWhere Island
PM |
@sarmadgilani
the BIN file doesnt work in my w810? why?
I just flash it as MAIN (344 flashblock) then stop them at 100% remove battery bla bla bla...then when I turn it ON, It doesn turn ON. DEAD PHONE, so I reflash again with my usual main f/w and now revive again. |
pakraider
Joined: Jul 25, 2003
Posts: 313
PM |
On 2007-05-10 08:10:27, pram_zx wrote:
@sarmadgilani
the BIN file doesnt work in my w810? why?
I just flash it as MAIN (344 flashblock) then stop them at 100% remove battery bla bla bla...then when I turn it ON, It doesn turn ON. DEAD PHONE, so I reflash again with my usual main f/w and now revive again.
Flash it as MAIN.. let it go to 100% and wait for about 45 seconds, remove the battery first and THEN remove the usb cable.. then place the battery back in and you're good to go. works 100%.
On 2007-05-10 07:11:51, fezzo wrote:
@sarmadgilani
hei...can u make v.5.6 without CC? i've tried your new driver (5.6), to much red in the dark place. Not real colors
if you really dont want CC then remove the line #COLOR_COR from the driver file.. then it wont be on anymore.
[ This Message was edited by: sarmadgilani on 2007-05-10 07:16 ] |
myavu
Joined: Apr 09, 2007
Posts: 73
From: New Delhi, India
PM |
On 2007-05-10 00:30:20, sarmadgilani wrote:
Sarmad's 5.6 driver - optimized for W810
based on 4.81 (which is based on 4.5)
special thanks to guguly and Nirodha and everyone else who gave feedback and tested and helped me on this.
Normal mode = Faster EN/ENM - JPEG 89%
Fine Mode = Slower EN/ENM (lower ISO, more exposure) - JPEG 89%
Improved and Accurate Focus
Good Quality Color correction always on
Improved Sharpness
Auto Exposure Lock
LED white balance defaults to Flourescent for better tint
Fixed bug with white balance in LED ENM
MXE-60 Flash accessory support
Macro mode = Enhanced Mode (slightly longer exposure)
Manual Focus (use zoom keys to select focus)
1.0:autofocus, 1.1:infinity, 1.2-4.0 manual
Macro + Night = Enhanced Night Mode (longer exposure, very low noise)
Manual focus (as described above)
VIDEO RECORDING: Normal 15fps, Night 10fps, EnhancedNight 5fps
Normal mode has Smooth Zoom
Normal mode with Macro has same quality but with Manual Focus
EnhancedNight mode has Manual Focus with zoom keys
************
Download 5.6:
http://www.mediafire.com/?9vjntygkdzv
Download 5.6 Spot Edition
Ssame as 5.6, except Normal mode = JPEG 75% - Spot Off, Fine Mode = JPEG 89%, Spot On.
http://www.mediafire.com/?5vmdmzjma5c
[ This Message was edited by: sarmadgilani on 2007-05-09 23:33 ]
@Sarmadgilani
Hi... What is the file size of the driver 5.6. It's showing 23KB... Is that right?
Regards
Xperia Ray, W760i, S500i, W810i |
myavu
Joined: Apr 09, 2007
Posts: 73
From: New Delhi, India
PM |
@Sarmadgilani
OK, I tried again and now the driver file size is 32.3 KB (33,118 bytes).
Thank you once again.
I will give the feedback in couple of days
Love & Regards
__________________________________________________________
W810i Black, R4EA031/R4ED001, 4GB Sony MS, Smellulater's Best Quality W810i Acoustic, Sarmad 5.6 Cam Driver
[ This Message was edited by: myavu on 2007-05-10 07:36 ] |
murz2005
Joined: May 02, 2007
Posts: 9
PM |
On 2007-05-10 00:30:20, sarmadgilani wrote:
Sarmad's 5.6 driver - optimized for W810
based on 4.81 (which is based on 4.5)
special thanks to guguly and Nirodha and everyone else who gave feedback and tested and helped me on this.
Normal mode = Faster EN/ENM - JPEG 89%
Fine Mode = Slower EN/ENM (lower ISO, more exposure) - JPEG 89%
Improved and Accurate Focus
Good Quality Color correction always on
Improved Sharpness
Auto Exposure Lock
LED white balance defaults to Flourescent for better tint
Fixed bug with white balance in LED ENM
MXE-60 Flash accessory support
Macro mode = Enhanced Mode (slightly longer exposure)
Manual Focus (use zoom keys to select focus)
1.0:autofocus, 1.1:infinity, 1.2-4.0 manual
Macro + Night = Enhanced Night Mode (longer exposure, very low noise)
Manual focus (as described above)
VIDEO RECORDING: Normal 15fps, Night 10fps, EnhancedNight 5fps
Normal mode has Smooth Zoom
Normal mode with Macro has same quality but with Manual Focus
EnhancedNight mode has Manual Focus with zoom keys
************
Download 5.6:
http://www.mediafire.com/?9vjntygkdzv
Download 5.6 Spot Edition
Ssame as 5.6, except Normal mode = JPEG 75% - Spot Off, Fine Mode = JPEG 89%, Spot On.
http://www.mediafire.com/?5vmdmzjma5c
[ This Message was edited by: sarmadgilani on 2007-05-09 23:33 ]
Good driver!
The only thing I did not understand is macro mode - many photos are unfocused. |
SPU
Joined: Feb 07, 2007
Posts: 131
From: Russia, SPb
PM |
stingjoel
Enter the supermode, set ISO to 100 or 200 and adjust shutter speed to get as bright picture as you want (remember that slowest shutter speeds available when Night mode is on). In this way you'll get a low noice picture but you need a very long time to get a picture (because of long exposure time) and even you can fail to get the picture if exposure time will be too long (stupid camera watchdog =( )
If you want a "fast" night shot with noice set ISO to higher values and adjust shutter speed.
It's very easy to get what you want with supermode driver =)
kcscm
Use the sequence <<**>> (not <<**<<)
Small hint: in any switching sequence starts at EV 0.0 and the end of sequence also must be at EV 0.0, if not... something wrong =)
|
fezzo
Joined: Apr 01, 2007
Posts: 20
PM |
@sarmadgilani
do u meant all this line?
COLOR_COR= $p1 01
$c1 00
#SET_REG(20, f2)
#SET_REG(21, f6)
$cl
$c1 01
#SET_REG(20, f8)
#SET_REG(21, de)
$cl
$c1 02
#SET_REG(20, f2)
#SET_REG(21, f6)
$cl
$c1 03
#SET_REG(20, f2)
#SET_REG(21, f0)
$cl
$c1 04
#SET_REG(20, f2)
#SET_REG(21, f2)
$cl
#SET_REG(20, ef)
#SET_REG(21, e9)
$cx
$cx
$cx
$cx
$cx
#COMMAND(55, 01)
#COMMAND(13, 01);
[ This Message was edited by: fezzo on 2007-05-10 08:03 ] |
|
|
Posted: 2007-05-10 01:12
