| Author |
C510 & C702 Cyber-shot CCD |
PaNdaPaNda
Joined: Apr 14, 2009
Posts: 42
PM, WWW
|
@gedas
can u upload some lowlight picca?  |
|
|
gedas5
Joined: Mar 10, 2007
Posts: 380
PM |
@ PandaPanda
i hope you managed to backup your driver acording to the link i gave you and you already trying Code's driver yourself
 don't forget to share your findings and sample photos to give the idea for Code what else can be improved...he really needs good testers 
some night shot samples. keep in mind that these are not all the shots that turn out to be like this. i just selected the best ones that could be uploaded...the ones that bluried out or don't look like a keeper to me i won't upload...i know that Code knows that the night mode still needs more improvement..maybe even quite a lot as i know he said it's really hard to do it...but hopefully he'll do something about it
Note: these are selected photos and not random ones also they were taken with different modes but unfortunately i don't remember what settings...you just need to try yourself and see what best suits you 
[ This Message was edited by: gedas5 on 2009-06-02 18:51 ] |
code28h4p
Joined: Apr 24, 2008
Posts: > 500
From: Republic of Indonesia
PM |
If you need stock camdriver, I have one...just pm me...and i'll gave you for free...(c510: 2.2 and 3.3 for c702).
Next...who want manual touch?? |
gedas5
Joined: Mar 10, 2007
Posts: 380
PM |
@ Code
what is manual touch? if it's something good then i want it  |
gedas5
Joined: Mar 10, 2007
Posts: 380
PM |
@ Code
just tried Document mode under low light conditions and i think that flash firing too bring...i think LED light should be reduced a bit...some samples:
Document mode EV 0.0
Auto mode EV 0.0
Auto mode EV -1.0
if i reduce EV even more to reduce LED light time then it doesn't fire at all
i believe that in Document mode you should reduce LED time...of course normally if people take pictures of any documents od text they try to do it in natural light or under well lit conditions but what if you don't have any light and the only light is LED you see the less LED light gets on the paper the more readable it is. Or maybe you could make LED light with lower EV values than -1.0 which will produce even less light and therefore not just a bright peace of paper without any text hope you understand what i'm trying to say 
[ This Message was edited by: gedas5 on 2009-06-02 19:48 ] |
PaNdaPaNda
Joined: Apr 14, 2009
Posts: 42
PM, WWW
|
yah!
im goin to be ur tester too!
wat is EV?
3rd time asking.
xD
gedas, where should i put code camdriver?
path? |
PaNdaPaNda
Joined: Apr 14, 2009
Posts: 42
PM, WWW
|
ifs/setting/acoustic
am i correct??
xD |
gedas5
Joined: Mar 10, 2007
Posts: 380
PM |
@ PandaPanda
the location for camdriver is ifs\settings\camera replace camdriver0.dat with the new one from Code
EV is http://en.wikipedia.org/wiki/Exposure_value
you can control it with the joystic pressing to the left of to the right depending on whether you want the photo to be lighter or darker |
pakhusin
Joined: Feb 22, 2009
Posts: 277
PM |
CODE
a simple reminder for u code.
remember, C510 led light position is under the lens.
so, in macro mode, it will produce overexposed picture than a C702
if u dont believe me, try capturing macro with led with ur C702, but inverted horizontal position and you'll see the difference..
for C510 user, i suggest u when u taking macro picture, try invert ur phone (keypad on left hand side, lcd on right hand side)  |
code28h4p
Joined: Apr 24, 2008
Posts: > 500
From: Republic of Indonesia
PM |
@pakhusin
thanx for your advice...
Here some sample with simple manual focus
scene: auto, FOcus: infinity
 |
pakhusin
Joined: Feb 22, 2009
Posts: 277
PM |
now i understand.. u mean in ur newest camdriver, to get manual focus properties,
one must set SCENE to AUTO, and FOCUS to INFINITY rite?
so, after that adjust focus value with +/- EV value? Am I correct?
[ This Message was edited by: pakhusin on 2009-06-03 09:30 ] |
gedas5
Joined: Mar 10, 2007
Posts: 380
PM |
@ Code
aaaahhh...you implemented manual focus wow!!! well done!!! you see you are improving a lot!!!  just from noob modder you became almost as good as the rest well respected modders keep it up like this |
code28h4p
Joined: Apr 24, 2008
Posts: > 500
From: Republic of Indonesia
PM |
Just say thanx to witchking who have done this trick with his K850's driver. |
lucasschimdt
Joined: Dec 16, 2008
Posts: 64
PM |
On 2009-06-03 13:44:20, code28h4p wrote:
Just say thanx to witchking who have done this trick with his K850's driver.
do you believe that witchking is a modder? you are joking no
I tested this camdriver and with many errors in the photo does not work the functions and for a k850 is very poor.
Not just copy drivers from other models to be used, donīt works.
|
gedas5
Joined: Mar 10, 2007
Posts: 380
PM |
@ Code
aaa..so that was witchking who contributed to this i asked him couple of days ago to have a look in c510 camdriver as he started modding c905 camdriver...so i thought because it's the same platform then the camdriver structure should be similar and he said he'll have a look whenever he has time so probably you two can work together thats good as witchking is good in modding camdrivers |
|
|
Posted: 2009-06-02 19:32
