| Author |
Super camera driver for k750/w800/w810 |
679
Joined: Oct 05, 2006
Posts: 174
PM |
IMO, EN or EM must not too bright...this EN/EM adopt Chengrong's Enhanced Night scene which not too bright.
If this EN/EM is brighter, it will like ENM, so I think this EN/EM is good 
Realy I mean only viewfinder brightness - not pictures brightness. EN pictures are OK. But i want viewfinder be brighter in EN. And BTW it is strange, but in EN and low light autofocus can't work (white frame on screen). Pictures can be blured, but pictures brightnes is OK. Of course i can turn on ENM, but very often pics are overexposed and blured coz of cam shaking durinng VERY long exposure. |
|
|
pakraider
Joined: Jul 25, 2003
Posts: 313
PM |
i think my problem is indeed a scratched up lens..  i know its just the transparent cover as someone mentioned, but i looked at old photos from when i got the phone, so of course stock drivers. and they were nice and SHARP.. now, even with stock drivers or any others, its always blurry/blotchy.. not at all like it used to be..
is there any way to replace the lens? or am i out of luck
@679: maybe try this.. turn on macro and night so you have a bright viewfinder.. use the manual focus to get a nice focus.. then turn off the night mode and take the shot.. and you'll have a nice EM picture 
[ This Message was edited by: sarmadgilani on 2007-04-19 08:52 ] |
Kriomag
Joined: Dec 20, 2006
Posts: > 500
From: Poland
PM, WWW
|
On 2007-04-19 09:51:22, sarmadgilani wrote:
is there any way to replace the lens? or am i out of luck
buy new camera module on ebay |
679
Joined: Oct 05, 2006
Posts: 174
PM |
@Kriomag
BTW which line in 21.8 driver can be changed to get max zoom 4 (not 16) in VR normal mode. I don't like 16X zoom
|
Kriomag
Joined: Dec 20, 2006
Posts: > 500
From: Poland
PM, WWW
|
On 2007-04-19 09:50:42, 679 wrote:
IMO, EN or EM must not too bright...this EN/EM adopt Chengrong's Enhanced Night scene which not too bright.
If this EN/EM is brighter, it will like ENM, so I think this EN/EM is good
Realy I mean only viewfinder brightness - not pictures brightness. EN pictures are OK. But i want viewfinder be brighter in EN. And BTW it is strange, but in EN and low light autofocus can't work (white frame on screen). Pictures can be blured, but pictures brightnes is OK. Of course i can turn on ENM, but very often pics are overexposed and blured coz of cam shaking durinng VERY long exposure.
EM is just enhanced normal mode so it has max exposure time 1/2 sec, so the brightness of picture is similar to normal mode, if you want brighter picture use ENM (-1EV) or regular night mode |
Kriomag
Joined: Dec 20, 2006
Posts: > 500
From: Poland
PM, WWW
|
On 2007-04-19 11:00:59, 679 wrote:
@Kriomag
BTW which line in 21.8 driver can be changed to get max zoom 4 (not 16) in VR normal mode. I don't like 16X zoom
just replace entire "ADVANCED_ZOOM" macro with this:
ADVANCED_ZOOM=$s0 %0 $c0 0a
06 02 00 01 00 61 #CMD_END $s8 00
$cl
$s0 0a $<0 6 $s1 %0 $>1 1 $+0 r1 $/0 %0 06 02 00 01 $w0 61 #CMD_END $s8 01
$cx; |
679
Joined: Oct 05, 2006
Posts: 174
PM |
@Kriomag
Thx... |
guguly
Joined: Jan 12, 2007
Posts: 120
PM |
On 2007-04-19 09:51:22, sarmadgilani wrote:
and they were nice and SHARP.. now, even with stock drivers or any others, its always blurry/blotchy.. not at all like it used to be..
probably an effect of too many and too much camdriver testing? 
but, yes, i think it's your scratched lens cover. try using a lens cleaner or you can buy a backplate cover from ebay or cnn. |
679
Joined: Oct 05, 2006
Posts: 174
PM |
@sarmadgilani
You can remove back panel http://forums.se-nse.net/index.php?showtopic=870 - but OPEN shutter slider before! And just make some shoots to compare if scratched protection glass was the reason... |
leon12
Joined: Feb 28, 2007
Posts: 15
PM |
kriomag
21.8 rocks! but.. i dont use normal night mode, so it would be nice that when "7" is pressed em is on, and when "7+4" (night+macro) is pressed then ENM is on. its just for faster use, faster then normal-fine switching what do you think, is it possible? |
nV
Joined: Mar 22, 2007
Posts: 47
PM |
@All
Did anyone try those Telescope lenses from Ebay? They are rather cheap and you get a 6x optical zoom. I am considering to buy one... |
679
Joined: Oct 05, 2006
Posts: 174
PM |
just replace entire "ADVANCED_ZOOM" macro with this:
ADVANCED_ZOOM=$s0 %0 $c0 0a
06 02 00 01 00 61 #CMD_END $s8 00
$cl
$s0 0a $<0 6 $s1 %0 $>1 1 $+0 r1 $/0 %0 06 02 00 01 $w0 61 #CMD_END $s8 01
$cx;
@Kriomag
You mean replace ALL long blok from "ADVANCED_ZOOM=" up to "NORMAL_SHOT= $c7 00"
with this one you pointed? |
jonaugust_69
Joined: Mar 31, 2007
Posts: 83
From: Greece
PM, WWW
|
@Kriomag
How we could have more contrast for pictures, with who command it is determined?
Thanks, Great work.
|
Kriomag
Joined: Dec 20, 2006
Posts: > 500
From: Poland
PM, WWW
|
On 2007-04-19 14:28:31, 679 wrote:
just replace entire "ADVANCED_ZOOM" macro with this:
ADVANCED_ZOOM=$s0 %0 $c0 0a
06 02 00 01 00 61 #CMD_END $s8 00
$cl
$s0 0a $<0 6 $s1 %0 $>1 1 $+0 r1 $/0 %0 06 02 00 01 $w0 61 #CMD_END $s8 01
$cx;
@Kriomag
You mean replace ALL long blok from "ADVANCED_ZOOM=" up to "NORMAL_SHOT= $c7 00"
with this one you pointed?
"ADVANCED_ZOOM= ......
.......
.....
..
......
..............;"
replace advanced zoom macro which ends with ";" |
ionutph
Joined: Dec 31, 2006
Posts: 7
PM |
driver wanted:
- base driver : 7.7f, 9.0, 4.5 or something good for w810i
- JPEG 89% (for Normal & Fine Picture Quality)
- smooth preview on screen
- color corected (on fine quality)
- 3 VR Modes (NormalMode=15fps, NightMode=10fps, EnhanceNightMode=5fps)
- profiles:
. 1.0 normal
. 1.1 Nightscene (1.4 from 8.54) (faster exposures selectable from ev value)
. 1.2 Manual Exposure Scence (1.8 form 8.54) (longer exposures selectable from ev value)
. 1.3 Sports (for very fast pictures)
- AE Lock
- Enhanced Modes Support WB Profiles (also with LED)
- Super Manual Focus (Macro ON + Night : 1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0 with Zoom preview)
- Advanced Zoom (Macro ON):
....- 12x smoothly zoom for DAY photos and NormalMode VR
....- 12x normal zoom at Night photos and NightMode VR
It will be like an updated 8.54 with CC, smooth preview, Wb for ENM,led , preview for manual focus, reduced zoom to 12.
For me will be perfect . The 1 button can't be configurated? key 1 is for setings but we have another key for setings.
[ This Message was edited by: ionutph on 2007-04-19 13:43 ] |
|
|
Posted: 2007-04-19 09:50
