| Author |
Solution to flash and change CDA of P990 at home! |
Popolou
Joined: Nov 30, 2002
Posts: 175
From: London
PM |
Quote:
|
On 2007-02-21 18:21:40, Mike.P® wrote:
Quote:
|
On 2007-02-21 18:08:41, Popolou wrote:
After a butt-clenching few seconds
|
|
Welcome to the world of phone flashing/unlocking 
That happens to me everytime I do someone elses phone.
_________________
|
Quote:
| I installed KK_client but it just wont start!!! what should've i do! |
|
I would probably try right clicking the executable, select compatibility and chose anothe OS, such as Windows 2000.
However, consider this: people are mentioning that the program gets flagged as a trojan/virus. If this is the case its likely that your AV scanner is terminating the program when started.
Try disabling the AV software, download the client once again and run it.
Regards
Popolou
[ This Message was edited by: Popolou on 2007-02-21 17:33 ] |
|
|
ksxt
Joined: Oct 23, 2006
Posts: 32
PM |
well i installed the program on my friend's labtop
for mine computer nothing happened
for his computer the program started for about 2secs then closed immedaitely
[ This Message was edited by: ksxt on 2007-02-21 17:41 ] |
japstyle
Joined: Dec 08, 2006
Posts: 18
PM |
Hi Guys maybe you can give me some info and HOPE..!!
I changed my cda on my p990i and I entered it incorrectly now I ended up with 2 CDA'S. Is it possible to redo the CDA again?
Thanks |
Popolou
Joined: Nov 30, 2002
Posts: 175
From: London
PM |
Load up another credit. In the meantime, do a full reset with the newly flashed unit and check the CDA. If it returns with a single entry then go ahead and redo the CDA change. If not, flash with SEUS to remove the dual CDA but be careful to its a valid CDA first.
I would suspect that performing a flash again via KK Client will incur a third CDA entry and this is unknown territory with the phone and SEUS.
Regards
Popolou |
my_p990i
Joined: Dec 12, 2006
Posts: 91
From: Cebu, Phils.
PM |
guys, there are few kk clients that i see on the KK site...which one should i use? please help....any step by step guide for me will be very helpful...i am still waiting for my login details since i just bought credits few hours ago...please help me prepare on what i should do...thanks again |
spectre77
Joined: Jan 28, 2007
Posts: 42
From: Malaysia
PM |
Hi guys,
This is as detail as i can be.
1) make sure battery is fully charged
2) open kkclient
3) fill in login & password details (click check account to check you credit balance)
4) format internal drive
5) master reset
6) take out simcard
7) replace battery
 check change cda box in kkclient with the CDA162007/1 typed in it
9) click flash phone
10) press c button
11) connect usb
12) when kkclient reads "phone connected", release c button
13) kkclient will read phones' info
14) cda change done!
15) for some reason, kkclient will dissappear/shut down right after (in some cases it doesn't) but this does not effect anything
16) unplug usb
17) replace simcard
18) restart phone (at this time you will see 2 cda lines)
19) master reset phone again
20) flash with seus (seus detects phone as world 1 generic)
21) done! (as for now, you will only have 1 cda line as it should be)
But i did another master reset and ran seus again just to be sure.
so there you go...hope this helps. good luck!
Edit:
Disclaimer: I will not be held responsible if it does not work for some of you. At least it did for me and for some. Just trying to lend a hand here.
[ This Message was edited by: spectre77 on 2007-02-21 18:37 ]
[ This Message was edited by: spectre77 on 2007-02-21 18:53 ] |
my_p990i
Joined: Dec 12, 2006
Posts: 91
From: Cebu, Phils.
PM |
wow...thanks a lot spectre77 |
Popolou
Joined: Nov 30, 2002
Posts: 175
From: London
PM |
Just to add to that very thorough list: -
- You will need to hit the "FLASH PHONE" button to enable the CDA change
- The software did not shutdown (in my case)
- Master reset after flash is not really necessary. Just go directly to SEUS.
Regards
Popolou |
spectre77
Joined: Jan 28, 2007
Posts: 42
From: Malaysia
PM |
Quote:
|
On 2007-02-21 19:13:15, Popolou wrote:
Just to add to that very thorough list: -
- You will need to hit the "FLASH PHONE" button to enable the CDA change
- The software did not shutdown (in my case)
- Master reset after flash is not really necessary. Just go directly to SEUS.
Regards
Popolou
|
|
Thank you for the info Popolou.
a) In case you missed it, the FLASH PHONE part is in no. 9. 
b) The software did shut down on me, although it's great if it doesn't.
c) I did a master reset just to be sure of a super clean install.
But then again, that's just me being paranoid i guess. Cheers.
|
gseh88
Joined: Jun 27, 2006
Posts: 134
From: London, UK
PM |
Well, I've managed to change the CDA on my Vodafone P990 despite having little or no idea of what I was doing! I downloaded the Client, Hermione and USB drivers but all I actually needed to do was start the Client, hold the C button and insert the USB and the Client found the phone and did its thing after I entered the new CDA number. I did not install either the USB or the Hermione drivers. I've now updated the firmware via SEUS and have no issues. I need more time to see if there has been any improvement in performance though.
A few things to point out are:
1. When updating via SEUS, the process would not get beyond holding down C and plugging in the USB. Nothing happened until I closed the KK Client application which I had left open.
2. Vodafone remnants remain scattered around the phone if you look hard enough. e.g. The Vodafone folder (containing stuff like Sport+, My Vodafone+, Entertainment+, etc) in Tools is still there as well as the locked Internet Accounts (Contract MMS, PAYT Internet, PAYT WAP, PAYT MMS, PAYT Internet, etc). I can confirm that I am on CDA162007/1 R4B03 and the Vodafone startup and shutdown have all gone. Have any others noticed this?
3. Updating the firmware has made no difference to the amount of RAM available which remains at about 14.8 mb for me. Having said that I've just checked again and it seems to have gone up to 15.2 mb.
4. It's probably unrelated but when I tried to reinstall Swiss Manager Pro and Tube 2 I got some Runtime Error message despite restarting the PC and the phone. This problem then seemed to clear itself after 20 minutes. Definitely got me worried though!!
Anyway, for all those out there like me, I would like to assure you that the process is pretty simple so take the plunge if you feel the need to have the latest firmware.
[ This Message was edited by: gseh88 on 2007-02-21 18:38 ] |
Nanu
Joined: Feb 18, 2006
Posts: > 500
From: Warrington, UK
PM, WWW
|
@gseh88
You will have vodafone rembrandts as these are on your sim, take it out they go put it back in they reappear simple!!
format your internal memory and it will increase your mb by removing non essential data etc! also a master reset should rid you of those data accounts!! but you'll still need them to connect any how!
Hope this helps
_________________
I stopped fighting my inner demons,
We're on the same side now......
[ This Message was edited by: nanu*1 on 2007-02-21 18:39 ] |
Guy H
Joined: Feb 19, 2004
Posts: > 500
From: UK
PM |
Oh dear. I think a lot of people need to read through this thread carefully before they start pressing buttons and changing CDA numbers. All the info you need is here now having been answered by those who've done it before and helped others.
Take your time people and think about what you're doing. |
gseh88
Joined: Jun 27, 2006
Posts: 134
From: London, UK
PM |
@nanu*1,
Thanks for the info. I'm not sure if the internet account stuff is on my Sim though. When Vodafone gave me the P990, it had a different Sim in it and I am now using the Sim from another phone. When this Sim is in my M600, there is no trace of the Vodafone locked internet account settings so they must actually be on my P990 somewhere.
If I reformat the phone, will I have to redo all my email accounts and shortcuts again? I backup the phone but when I restored the settings all these items were still missing which was a real pain. |
c0mm0n
Joined: Jan 14, 2003
Posts: 216
From: Paris, France
PM |
Updating in progress, thx all for your help.
I'll have credits to sell, ok for paypal mp me if interested (i'm not a reseller, just bought a few more) |
Nanu
Joined: Feb 18, 2006
Posts: > 500
From: Warrington, UK
PM, WWW
|
Quote:
|
On 2007-02-21 19:38:25, nanu*1 wrote:
@gseh88
also a master reset should rid you of those data accounts!! but you'll still need them to connect any how!
Hope this helps
_________________
I stopped fighting my inner demons,
We're on the same side now......
|
|
I know its a pain mate but its the only way to do a clean install, and alot of people here including my self would advise against restoring from a previous backup!!
|
|
|
Posted: 2007-02-21 18:31
