| Author |
Raider camera driver for K790, K800 and K810 (v6.6.5) |
hfmls
Joined: Mar 17, 2008
Posts: 489
PM |
are you serious!! that brand, has it's main factory like 1km away from my house 
leica | |
|
Micha1982
Joined: Sep 27, 2008
Posts: 18
PM |
Heyho 
Sorry for my bad english 
I installed the Raiderski 6.4 a few days ago....can someone tell me, how to setup for good settings?!
Pictures i taken are sometimes very blurry (espacially when its getting a bit darker)...already changed sharpness between 1 and 10, now i set it to 5 and will test it the next days...
What can i do against that blurry-effects?
How to set Jpeg-compression?Leave it at 91% or set up to 95 or 100%?
How can i set ISO manually?
And what is a good OSD-menu, how can i install them??
My phone is a K810i with R8BF003 from K800i CID53!
Thanx for your answers!
Attached one of my best pics i taken the last days
 |
bbest
Joined: Sep 18, 2008
Posts: 33
From: Russia
PM |
On 2008-10-02 16:24:11, hfmls wrote:
are you serious!! that brand, has it's main factory like 1km away from my house
leica
steal photo matrix from them and insert it in your phone camera. You will be have greate photos after that |
hfmls
Joined: Mar 17, 2008
Posts: 489
PM |
lol how don't know how to do it. |
Micha1982
Joined: Sep 27, 2008
Posts: 18
PM |
Good morning
Yesterday i set the jpeg-compression to 64 (that should match 100%, or not?) and now size of my pics is smaller than before *wonder*.....
Can anyone pls tell me what im doing wrong?!
Here are some examples (all auto):
Size is only 770kb, think it looks very bad:
Size is only 766kb, should they not be much larger at 100% compression?
|
Micha1982
Joined: Sep 27, 2008
Posts: 18
PM |
On 2008-09-30 18:00:31, hfmls wrote:
compression 100%
2MP pictures: MIN: 860kb AVG:880kb MAX:901kb
pictures taken with these settings and at 2 mega pixels.
size 792kb 1st:
[ This Message was edited by: hfmls on 2008-09-30 17:05 ]
My pics are taken in 3,2Mp, but why is my filesize much smaller??Something must be wrong...pls tell me what |
hfmls
Joined: Mar 17, 2008
Posts: 489
PM |
there's nothing wrong, i've put the compression value at 64 (100%) and then edited the values to:
860 min 880 avg and 901 max |
Micha1982
Joined: Sep 27, 2008
Posts: 18
PM |
On 2008-10-03 12:13:17, hfmls wrote:
there's nothing wrong, i've put the compression value at 64 (100%) and then edited the values to:
860 min 880 avg and 901 max
Which values you edited??
How/where to set them for 3,2Mp?? |
hfmls
Joined: Mar 17, 2008
Posts: 489
PM |
search for JMIN in camdriver.dat
then there's a list of min avg max, the last one in 3.2 FINE |
bennywei1664
Joined: Sep 06, 2008
Posts: 65
From: Taiwan Taipei
PM |
This in what I see in camdriver.dat (not Eng.?)
// ====================================== kompresja jpeg
JMIN= #SET(15,!1) #SET(16,!0);
JMAX= #SET(13,!1) #SET(14,!0);
JAVG= #SET(17,!1) #SET(18,!0);
seq_set_prop_5=
$s0 %0
$c0 02 #JQ_NORMAL #JMIN(00,0a) #JMAX(00,96) #JAVG(00,37) $cl
$c0 03 #JQ_FINE #JMIN(00,0a) #JMAX(00,96) #JAVG(00,50) $cl
$c0 04 #JQ_NORMAL #JMIN(00,3c) #JMAX(01,90) #JAVG(00,c8) $cl
$c0 05 #JQ_FINE #JMIN(00,96) #JMAX(01,90) #JAVG(01,2c) $cl
$c0 06 #JQ_NORMAL #JMIN(00,96) #JMAX(02,58) #JAVG(01,90) $cl
$c0 07 #JQ_FINE #JMIN(01,90) #JMAX(02,58) #JAVG(01,f4) $cl
$b0 00 1 7
$c0 00 #JQ_NORMAL #JMIN(01,90) #JMAX(03,20) #JAVG(02,58) // dla 00/08
$cl #JQ_FINE #JMIN(02,bc) #JMAX(03,84) #JAVG(03,3e) // dla 01/09
$cx
$cx $cx $cx $cx $cx $cx
#SET(19,$w5);
Raider: Excuse me can you CAMDRIVER.DAT inside the Polish into English? Because my computer seems above would be like this ..... garbled grateful ^ ^"
// ===================================== operacje focusa
// 0 = zatrzymaj AF i utrzymaj pozycj?(klawisz nacii皻y i AF zako鎍zony)
// 1 = rozpocznij AF (klawisz nacii皻y)
// 2 = zatrzymaj AF i ustaw na niesko鎍zono (klawisz zwolniony)
_________________
K800i R8BA024 CID52
[ This Message was edited by: bennywei1664 on 2008-10-03 12:46 ] |
Micha1982
Joined: Sep 27, 2008
Posts: 18
PM |
On 2008-10-03 12:35:56, hfmls wrote:
search for JMIN in camdriver.dat
then there's a list of min avg max, the last one in 3.2 FINE
Please not too detailed....
-----------------------------------
JMIN= #SET(15,!1) #SET(16,!0);
JMAX= #SET(13,!1) #SET(14,!0);
JAVG= #SET(17,!1) #SET(18,!0);
seq_set_prop_5=
$s0 %0
$c0 02 #JQ_NORMAL #JMIN(00,0a) #JMAX(00,96) #JAVG(00,37) $cl
$c0 03 #JQ_FINE #JMIN(00,0a) #JMAX(00,96) #JAVG(00,50) $cl
$c0 04 #JQ_NORMAL #JMIN(00,3c) #JMAX(01,90) #JAVG(00,c8) $cl
$c0 05 #JQ_FINE #JMIN(00,96) #JMAX(01,90) #JAVG(01,2c) $cl
$c0 06 #JQ_NORMAL #JMIN(00,96) #JMAX(02,58) #JAVG(01,90) $cl
$c0 07 #JQ_FINE #JMIN(01,90) #JMAX(02,58) #JAVG(01,f4) $cl
$b0 00 1 7
$c0 00 #JQ_NORMAL #JMIN(01,90) #JMAX(03,20) #JAVG(02,58) // dla 00/08
$cl #JQ_FINE #JMIN(02,bc) #JMAX(03,84) #JAVG(03,3e) // dla 01/09
$cx
$cx $cx $cx $cx $cx $cx
#SET(19,$w5);
-----------------------------------
Thats what I found in my camdriver0.dat
-----------------------------------
$c0 02 #JQ_NORMAL #JMIN(00,0a) #JMAX(00,96) #JAVG(00,37) $cl
$c0 03 #JQ_FINE #JMIN(00,0a) #JMAX(00,96) #JAVG(00,50) $cl
Thats for 1Mp, right?
$c0 04 #JQ_NORMAL #JMIN(00,3c) #JMAX(01,90) #JAVG(00,c8) $cl
$c0 05 #JQ_FINE #JMIN(00,96) #JMAX(01,90) #JAVG(01,2c) $cl
That must be 2Mp....
$c0 06 #JQ_NORMAL #JMIN(00,96) #JMAX(02,58) #JAVG(01,90) $cl
$c0 07 #JQ_FINE #JMIN(01,90) #JMAX(02,58) #JAVG(01,f4) $cl
And that is 3,2Mp...
And what is the rest?
$b0 00 1 7
$c0 00 #JQ_NORMAL #JMIN(01,90) #JMAX(03,20) #JAVG(02,58) // dla 00/08
$cl #JQ_FINE #JMIN(02,bc) #JMAX(03,84) #JAVG(03,3e) // dla 01/09
$cx
$cx $cx $cx $cx $cx $cx
#SET(19,$w5);
-----------------------------------------------
These settings i have to change you say:
$c0 06 #JQ_NORMAL #JMIN(00,96) #JMAX(02,58) #JAVG(01,90) $cl
$c0 07 #JQ_FINE #JMIN(01,90) #JMAX(02,58) #JAVG(01,f4) $cl
But how?
JMIN(00,96) for example, what means the 00 and what means 96??
When i change 96 from hex to dec it is 150, when i change the JMAX 58 from hex to dec it is 88?? That sounds very unlogical for me!
|
Micha1982
Joined: Sep 27, 2008
Posts: 18
PM |
And is it possible to install something like that with FARmanager to my CID53-phone? |
hfmls
Joined: Mar 17, 2008
Posts: 489
PM |
there are 00,00
you use the last 3 numbers, so it's like this:
_0,00 they are in hex. use windows calculator |
Micha1982
Joined: Sep 27, 2008
Posts: 18
PM |
But i dont understand these settings....
Then i calculate:: (fine settings)
1Mp min: 00,0a -> 10
1Mp max: 00,96 -> 150
1Mp avg: 00,50 -> 80
2Mp min: 00,96 -> 150
2Mp max: 01,90 -> 400
2Mp avg: 01,2c -> 300
3mp min: 01,90 -> 400
3mp max: 02,58 -> 600
3mp avg: 01,f4 -> 500
---------------------------------
But when i take photos, filesize is betwenn 700 and 900kb....can u please explain me a bit more detailed??
Dont wanna change anything wrong
And for what are these settings:
$b0 00 1 7
$c0 00 #JQ_NORMAL #JMIN(01,90) #JMAX(03,20) #JAVG(02,58) // dla 00/08
$cl #JQ_FINE #JMIN(02,bc) #JMAX(03,84) #JAVG(03,3e) // dla 01/09
$cx
$cx $cx $cx $cx $cx $cx
#SET(19,$w5);
Thanks
[ This Message was edited by: Micha1982 on 2008-10-03 13:56 ]
[ This Message was edited by: Micha1982 on 2008-10-03 13:58 ] |
Micha1982
Joined: Sep 27, 2008
Posts: 18
PM |
im gettin crazy.....
now i increased settings...but nothing happens!
3,2mp fine is now:
min: 500
max: 700
avg: 600
took 3 pictures, filesize is only 724kb,848kb and 747kb...
JQ-quali (fine) is 64 (100).....
where is my mistake?? | |
|
Access the forum with a mobile phone via esato.mobi
|
Posted: 2008-10-02 16:24
