| Author |
C905 CamDriver Modded |
DarKMaGiCiaN
Joined: Aug 25, 2006
Posts: > 500
PM |
@masada1971,necoo,4ever09,eeeyaaan,mauasca,luhccas-k790
thanks for the help ^_^
so now I can say that the only problem with the 1.6 right now is the indoor shots with the flash ... CORRECT !!
( question is this in Auto sence ?)
for people who tested my 1.6 test driver ( I uploaded it yestrday and deleted the link )
did you face the same problem with the test driver or not !!
no phone yet so I depend on you guys ...
[ This Message was edited by: DarKMaGiCiaN on 2009-04-20 22:15 ] | |
|
eeeyaaan
Joined: Apr 11, 2009
Posts: 60
PM |
i don't know how to check for the iso of the pictures i took.. but i just wanted to say that problems i found were in auto mode, with flash, shot indoors  just too dark.. other than that.. i think it's a nice driver colors and pictures taken without flash are great i just wanted to compliment you on that keep it up  i'll be waiting for your update |
necoo
Joined: Dec 31, 2007
Posts: 29
PM |
When you use flash the iso is on 100 i that is good for shot's indore wiht sunlight... but in totaly dark so the iso needed to be 200 300... and the color gets to much when the iso in only 100.. and i dont use auto.. |
lucasschimdt
Joined: Dec 16, 2008
Posts: 64
PM |
On 2009-04-16 20:42:04, luhccas-k790 wrote:
On 2009-04-16 15:03:03, lucasschimdt wrote:
luhccas-k790
Hey Mr.luhccas-k790 about your acoustics?? any new?
I'm back
Off topic:
Sabia que não iria passar muito tempo longe
Quanto aos acoustics estão "prontos" há um bom tempo,não foram divulgados prq estou sem o k850 pra testá-los com os fones mais comuns(os originais,hpm-64 e os hpm-70).
Eu relacionei os valores e as respectivas funções dos wbxml,agora é só "brincar"...
Ex:
HK.AUX01 e HK.AUX02 = Volume
Ex.: Entre eles você irá encontrar letras(J e G normalmente se o drive não for modificado).
HK.BEARN e HK.BEARP = Responsáveis pelo playback(mexer aqui altera a forma que você reproduz o arquivo de audio... Melhor deixar quieto)
HK.SPKRN e HK.SPKRP = Responsável pela intensidade do som e pelo reforço de graves.(o HK.SPKRP necessita de outros valores)
GK.NoiseReduction = Como o nome quase se identifica,redução de ruído ou post processing de frequencia.
GK.DRS e HK.RX = O primeiro é o maldito DRC e o segundo é o que complica toda a historia ¬¬'(precisa fazer uma combinação "mágica" pra conseguir anular toda a compressão de frequencias)
HK.RXFILTER = Filtro,influencia na qualidade principalmente em arquivos de bitrate baixa.
HK.RXDPGA = Outro volume,mas aqui o noise começa a dar as caras literalmente se exagerar.
HK.RXDPGA34 e HK.RXFILTER = Influencia na qualidade tambem mas pode produzir "hoarseness",quanto mais valor mais aparente...
Sabendo desses valores tudo pode ser feito mas nos novos Sony's a pasta acoustic da tpa/preset/custom é a "mão-na-roda" do som.
Obs.:Sou capixaba,moro em Fortaleza prq me pagam melhor aqui(deveria pesquisar sobre o ramo imobiliário desta cidade antes de chamar de pequena.Ah!E que por acaso é destaque no setor têxtil,apiculturista,frutos do mar,turismo,agricultura e várias outras áreas),nunca trabalhei em operadora e tenho absoluta certeza de que você não faz idéia do tamanho do meu conhecimento na área... Não é exposto feito quadro por se tratar de um mundo nocivo,a exemplo dos seus ataques sem sentido no orkut.(ou vai me dizer que você falou aquilo pra ajudar?Menosprezo não é ajuda... Críticas apontando o que está errado,sim)
Pois bem,eu ajudo como posso e quando o tempo deixa.Afinal não sou nenhum desocupado procurando confusão na internet 
======================================================
Welcome back,hope you calm down now...
With a Westone um2 and a Fiio e5 head-amp who need to change acoustics?:D
For k850 i've finished the v2 but i don't have it in my hands now for test with default headphones.(broken display)
And now looking at vol_emp_eq_on.csv and vol_eq_off.csv...
This is basically volume control but make a big difference.
luhccas-k790 relax
I don´t want to know of your life or where you live, because it interests me not only want to know if you can make a tutorial of acoustics for A2 like as this topics below.Because actually the audio is very low and wanted to use the audio higher with and without heardphone and bluetooh.
Thanks!
Tutorial For Modding A2 Acoustics, A Tutorial
http://forums.se-nse.net/inde[....]8&pid=500543&st=0&#entry500543
http://forums.se-nse.net/index.php?showtopic=36661
[ This Message was edited by: lucasschimdt on 2009-04-21 15:12 ] |
DarKMaGiCiaN
Joined: Aug 25, 2006
Posts: > 500
PM |
@eeeyaaan
so indoor + flash = dark
that is the problem !!!
greate because it is easy to solve ^_^
@necoo
yes you are correct
I set the ISO to be 100 when the flash is used
that why I asked if the problem was with just flash shots or in all indoor and what is the ISO of the shots
hight ISO = more noise
but on the other hand
low ISO = less brightness
for me I'm happy with the low ISO even the shot become dark
^_^
so all of you guys are not happy with the low ISO
and you want more brightness in indoor shot with flash
OK I'll fix the driver ^_^
|
necoo
Joined: Dec 31, 2007
Posts: 29
PM |
On 2009-04-21 14:37:57, DarKMaGiCiaN wrote:
@eeeyaaan
so indoor + flash = dark
that is the problem !!!
greate because it is easy to solve ^_^
@necoo
yes you are correct
I set the ISO to be 100 when the flash is used
that why I asked if the problem was with just flash shots or in all indoor and what is the ISO of the shots
hight ISO = more noise
but on the other hand
low ISO = less brightness
for me I'm happy with the low ISO even the shot become dark
^_^
so all of you guys are not happy with the low ISO
and you want more brightness in indoor shot with flash
OK I'll fix the driver ^_^
yeah that is ISO NOISE . but like i say i dont know try to set iso to 150. when flash is use and when U USe the FLASH the COLOr'S of that person get To MUCH if u have msn i can send u a pic u can see all that on..
and i tink you use u cam more to take Pic of Things not that much pelpo right:D? that why u like low iso . and overbosted Color right? but that Dont work well on face shots:D
High ISO number (ISO 400, 800, 1600):
# Fast shutter speeds made possible
# More light-sensitive
# Grain image
# Very useful for sports events and billedtagning people on the move
# Between ISO number (ISO 100, 200):
# Suitable for general use, preferably outdoors
# Clear and detail-rich images
# Low ISO numbers (ISO 25, 50):
# Slow shutter speeds require / allow
# Less light-sensitive
# Good for static subjects where you might. have a tripod
# Very clear and detail-rich images
# Very suitable for portrait photography in studio and macro photography with artificial
i hope that that well help u but the PROBLEm for Me and i tink ohters is that the color's get over bosted when u use Flash..
[ This Message was edited by: necoo on 2009-04-21 14:26 ] |
mauasca
Joined: Oct 04, 2007
Posts: 196
From: Pavia (Italy)
PM, WWW
|
@DarKMaGiCiaN
Look at the quality of the macro, saturation, and colors are fantastic o_0
Good work friend, and excellent CamDriver ^ _ ^ '
DarKMaGiCiaN 1.6:
S.E.C905_R1FA035_Modded
Satio U1 Black R2KA006 hack O_O
X10i White Android 2.1 Rooted no brand_MW600
|
Luhccas-U1a
Joined: Mar 24, 2008
Posts: > 500
PM, WWW
|
Off:
The tutorial to mod wbxml and .csv archives what i've seen are on topse.ru
The second link is a study of values and parameters,and they are quite freeze...
The bluetooth files i have posted on acoustic modding thread.The "how to" is what i said.Now,left the experts work alone... I will not waste my time with people who do not help me when i needed.
If you don't wanna "know" of my life don't talk about it and don't be a d**n regional racist offending me with foolishness .
And don't quote me anymore,keep distance,you're advised.
[ This Message was edited by: luhccas-k790 on 2009-04-21 17:35 ]  is a lifestyle! |
vrwarp
Joined: Apr 20, 2009
Posts: 3
PM |
edit: deleted top half (not worth it)
@darkmagican
cool work, keep up the good job =)
[ This Message was edited by: vrwarp on 2009-04-22 08:20 ] |
Luhccas-U1a
Joined: Mar 24, 2008
Posts: > 500
PM, WWW
|
"vrwarp
Joined: Apr 20, 2009
Posts: 1"
Nothing more to say.
Someone?God Jesus!This guy is sick!
Don't spam the topic like your friend.If you have nothing to say or do,just don't bother...
==============================================================================
@DarkMagician,try to make something like this for example:
NOT_DOC_MODE =
#COM_EVENT(02,XX)
#COM_EVENT(55,XX)
#COM_EVENT(56,XX)
#COM_EVENT(06,XX)
#SET_REG(95,XX)
#WB_ISOXXX
#FLASH_LIMIT_AUTO
;
For scenes:
SCENE_FLASH =
#COM_EVENT(02,XX)
#COM_EVENT(55,XX)
#COM_EVENT(56,XX)
#COM_EVENT(06,XX)
#SET_REG(95,XX)
#WB_ISOXXX
#FLASH_LIMIT_SCENE
;
Scene without flash:
SCENE =
#COM_EVENT(02,XX)
#COM_EVENT(55,XX)
#COM_EVENT(56,XX)
#COM_EVENT(58,XX)
;
Then in Property 16 for example;
seq_set_prop_10_1 = // Portrait
$sa 09
#TO_DRAFT
#SET_REG(64,XX)
#SET_REG(22,XX)
#COM_EVENT(51,XX)
#UPDATE_WB
#SCENE_FLASH
==============================
seq_set_prop_10_2 = // Landscape
$sa 09
#TO_DRAFT
#SET_REG(64,1E) // SCENE_SLOW_SHUTTER = 30, 1/6
#SET_REG(22,0F) // DRAFT_MIN_FRMRATE 7.5 fps
#COM_EVENT(51,06) // Landscape scene
#UPDATE_WB
#SCENE
[ This Message was edited by: luhccas-k790 on 2009-04-22 06:42 ] is a lifestyle! |
vrwarp
Joined: Apr 20, 2009
Posts: 3
PM |
edit: deleted post (not worth it)
@Emelianenko
Sorry about that, respecting the forum should indeed come first. =)
[ This Message was edited by: vrwarp on 2009-04-22 08:20 ] |
Luhccas-U1a
Joined: Mar 24, 2008
Posts: > 500
PM, WWW
|
If someone wants to left the default saturation and boost colors using a effect(solarize) here's the code:
In Property 8;
// Property 8, Effects
//---------------------------------------------------
// 0 => normal, 1 => negative, 2 => Vivid Colors, 3 => sepia
// 4 => black&white
seq_set_prop_8_0 = #COM_EVENT(53,00)
#COM_EVENT(58,00);
seq_set_prop_8_1 = #COM_EVENT(53,01)
#COM_EVENT(58,00);
seq_set_prop_8_2 = #COM_EVENT(53,00)
#COM_EVENT(58,XX); <------------
seq_set_prop_8_3 = #COM_EVENT(53,03)
#COM_EVENT(58,00);
seq_set_prop_8_4 = #COM_EVENT(53,04)
#COM_EVENT(58,00);
==========================================================
We can use forced flash and control the flash shutter speed using EV+red eye reduction(for some situations,of course).Tonight i'll post the code 
[ This Message was edited by: luhccas-k790 on 2009-04-22 15:44 ] is a lifestyle! |
Goldmen
Joined: Oct 07, 2007
Posts: > 500
From: Bulgaria
PM, WWW
|
On 2009-04-22 16:39:52, luhccas-k790 wrote:
If someone wants to left the default saturation and boost colors using a effect(solarize) here's the code:
..............................................................
Worked well in K800,btw...
|
masada1971
Joined: Jun 05, 2008
Posts: > 500
PM |
still waiting or the corrected 1.6 camdriver from Darkmagician... |
DarKMaGiCiaN
Joined: Aug 25, 2006
Posts: > 500
PM |
@masada1971
WAIT FEW SECs ..... | |
|
Access the forum with a mobile phone via esato.mobi
|
Posted: 2009-04-20 23:13
is a lifestyle!
