| Author |
K750i update service usb driver |
quaeler
Joined: Jun 23, 2005
Posts: 58
From: Paris, Bethesda, helLA
PM |
((in case anyone's as slow as i was, it's the 'c' on the phone, not the 'c' on the pc keyboard.)) |
|
|
juju66
Joined: Sep 24, 2003
Posts: 37
From: Switzerland
PM |
Unbelievable!! I'm not stupid with computer but it really wouldn't work! I always get this nice message "no usb cable found".
I restore my computer twice to the date before I installed all the stuff for the phone and I install everything from the beginning:
First: plug the phone to the pc, installation assistant appear, I pointed to the file where the downloaded driver were, all was installed fine
Second: plug the phone with the "c" trick, again the installation assistant prompt, I pointed to the file, everything ok.
Third: PCSuite installation, fine.
Fourth: update Java environment plugin
Fifth:go to se update page, click all the box, and didn't find anything. Even at the beginning the web browser wouldn't propose me to download the software from se, so I install it myself, perhaps the problem comes from this point???? When it wasn't installed, my web page stayed blanck, and now I've installed the seus_setup118.exe, it is impossible to find the usb cable!!
Anyone got an idea??? Would be very nice... |
juju66
Joined: Sep 24, 2003
Posts: 37
From: Switzerland
PM |
YES!!! I just cut my hotsync manager for palm which was trying to use a com port on my computer... It's now good BUT MY OPERATOR DOESNT ALLOW TO MAKE UPDATE... I DON'T UNDERSTAND... I'M ON ORANGE, SWITZERLAND AND HAVE NONE OF THIS STRANGE ORANGE ICONS.... And I got R1A044 EU_1... |
quaeler
Joined: Jun 23, 2005
Posts: 58
From: Paris, Bethesda, helLA
PM |
ya - i too am stuck on r1a044_eu_1(_cl), currently in france on sfr -- from talking with se representatives, the update apparently depends on both the operator and the hardware version of the phone (and supposedly that different markets have differing hardware)
oddly enough, if i try to update through the swiss section - i get the 'no usb cable' bullshit as well. usually i try through the UK site since, for whatever reason, they decided not to feature the software update link on the french version..
|
cheetah75
Joined: Jul 09, 2005
Posts: 1
PM |
Hi Guys,
I have 2 K750's, both arrived from Dubai and both had the software issue with freezing etc. Now, even though I had access to EMMA II and III, I tried to update the software on the phone via the SE support site - which I did once I got some info from you guys - THANKS.
Here is the problem:
The second K750 is not starting up properly, ie once switched on it usually stops on the "white blank screen" or the "sonyericsson logo", hence when I try to plug the USB cable (I am using the same USB cable - sic!) I receive a message from the "found new hardware" as "ERROR"??? with an attempt to load drivers. I tried with the USB software drivers - did not work. Even when after numerous attempts I get to the "Stand-by" state same error appears for the Driver signature!.
I am using 1 PC for this, first K750 updated the software properly the second can not. I even tried the "recovery" in the support site but could not do this as the second K750 is not recognised - recovery choice indicates that I can do this on the "first" K750 used for the software update.
Hence, I can not load the new software on the second K750. Any suggestions?
M. |
dts-phile
Joined: Dec 04, 2004
Posts: 189
PM, WWW
|
Does firmware update suppresses everything in the phone or is it just alright?
Thanks !
DTS-PHILE (Nice, France)
The DTS Surround Sound Passion
http://www.dts-phile.com |
manish
Joined: Oct 03, 2005
Posts: 6
From: INDIA
PM, WWW
|
While installing the "K750 Update USB driver" the Windows says that
this driver may not be apropriate for your device.
Can this be the problem that is causing failure of my firmware upgrade ("error communicating with the device" message at 53%)? |
Benson-112
Joined: Oct 11, 2005
Posts: 20
PM |
I get the same problem /\
I follwoing the instructions on SE and firs time i tried it when i held down 'c' and plugged in the cable it said "USB flash device" or something along those lines, i installed the update drivers fine for this. Then it flashed up saying "New hardware found - K750i".....now what do i need to install??? Device manager has K750 under the usb section with the big yellow ?
What am i doing wrong? |
jcpsad
Joined: Oct 15, 2002
Posts: > 500
PM, WWW
|
I agree with rambalu.. maybe i should teach the reps here what i've learned from Cherryboy... Finally R1N firmware!
www.photos.panelo.com
www.panelo.com
www.bilog.panelo.com
www.pbalive.panelo.com |
storm™
Joined: Jul 23, 2005
Posts: 12
PM |
im having the exact same problem, and have had since i got my phone, last time i used DaVinci, but im not paying again or every time an update comes out! |
dallas750
Joined: Aug 13, 2005
Posts: 64
PM |
well i've been reading all the post and still cant find the solution to my problem. i would appreciate it if you all could help me out.
the problem is that when i hold the 'c' key and connect it to my usb, my computer recognizes new hardware. so my question is, what do i do from here?
detailed instructions would be greatly appreciated.
and also, will this automatically update to the latest firmware?
thanks in advance for your help.
 |
WWJD?
Joined: Feb 13, 2003
Posts: 27
PM |
Download the Update service USB files first then, unzip it into a folder, after that turn off your phone wait till its completely off, press the c key of the phone while plugging in the USB cable- when the computer tells you it found a new USB flash device, it will look for the drivers, just point it to the folder with the unzipped files, that's it.
For God so loved the world that He qave His only begotten Son, thant whosoever believes in Him should not perish but have everlasting life. - John 3:16 |
dallas750
Joined: Aug 13, 2005
Posts: 64
PM |
well i was doing it off the SE site and following the steps through there. i had a feeling it was because my phone wasn't charged all the way so i went home and charged it all night.
this morning i did the same thing only this time when i connected my phone back to the USB it didnt recognize new hardware but it did start the update.
so i finished the update and rechecked my system info.
before i had: R1A044 w/ a 3.8 camera
now i have: R1N035 w/ a 4.5 camera
so my question is... did i finally get it updated? so far i haven't noticed any difference not even with my camera.
[ This Message was edited by: dallas750 on 2005-10-26 15:52 ] |
dallas750
Joined: Aug 13, 2005
Posts: 64
PM |
i also noticed that R1N035 is not the latest update, its R1NA005.
why was my phone not updated with the latest?
just wondering.
Thanx for you input guys. |
dallas750
Joined: Aug 13, 2005
Posts: 64
PM |
sorry for all the question guys.
i got one more. do i have to master reset my phone after i do the update for it to take effect? |
|
|
Posted: 2005-06-30 08:29
