| Author |
C902 camdriver |
Pensive
Joined: Sep 25, 2008
Posts: 1
PM |
It's hard to tell because they have been resized.
Surely a camera mod mainly increases the JPEG picture quality, reducing the lossy compression...?
Most of the artefacts of lossy jpeg compressions are halos and poor edges, which of course are significantly reduced and/or hidden by resizing bicubically in photoshop....?
Or am I wrong? | |
|
brazzuka's
Joined: Nov 14, 2007
Posts: > 500
From: South World-Antartida-Sweden
PM, WWW
|
Sony Ericsson Camera Driver c902 Model Omnivision 6680/Premier/Foxconn Secondary Videocall Camera VGA CAM
Update 2009-01-25
v1.4_Videocall Camera VGA CAM for c902
-Now Video Recording with Secondary Front Camera or Videocall Camera VGA CAM
-Video Recording 40fps to 45fps
-Time Video Recording 32s by mms
-Implemented some functions in Automode start cam OVT suggestion
*if necessary change the values for the functions
ONLY WORKS FOR SENSOR VGA CAM!!!
=> Normal colors
=> Warm colors Colors Saturation
=> Skin tones 1
=> Register dump
=> PSA Color settings
=> Skin tones 2
=> LCC Compromise
=> Skin tones 3
=> LCC Flextronics
=> Elena Colour settings for c902
=> Decreased contrast
=> Default contrast
=> LCC Foxconn
=> Double color matrix values enable
=> Double color matrix values disable
=>Color Bar Pattern for c902
=>Increase Horizontal- startpos with 4 pixels
=>Increase Vertical- startpos with 4 pixels
Tutorial: How record video w/ front cam by Sombra
link:
http://www.esato.com/board/viewtopic.php?topic=181234
Cybershot™v1.4_Videocall Camera VGA CAM for c902
Download:
http://www.4shared.com/file/8[....]l_Camera_VGA_CAM_for_c902.html
[ This Message was edited by: brazuka on 2009-02-04 00:41 ] |
0kti
Joined: Dec 24, 2006
Posts: 290
From: Poland
PM, WWW
|
great, working well
now i wait for GOOD display driver
_________________
C902 R3DA028 Modded + Setool 3 box, w980i acoustic, QuillScriptSE font, Chombos1 CamDriver, Flash Menu, techmode
[ This Message was edited by: 0kti on 2009-01-29 23:00 ] |
3_nity
Joined: Jul 25, 2008
Posts: 187
PM |
Can I use camdriver C902 into my K550?
Thx..  |
Raiderski
Joined: Jul 03, 2006
Posts: > 500
From: Poland, Hell, Mountains
PM, WWW
|
no you can't
|
brazzuka's
Joined: Nov 14, 2007
Posts: > 500
From: South World-Antartida-Sweden
PM, WWW
|
some tests for c902
new features
new techiniques
new manual settings for users and modders
|
brazzuka's
Joined: Nov 14, 2007
Posts: > 500
From: South World-Antartida-Sweden
PM, WWW
|
c902 Firmware Update camdriver0.dat
C902_R3BA035_camdriver0.dat
// 2008-04-11 Rev 1.8 Release for Alona
// 2008-04-09 Rev 1.7 Release for Alona
update/changelog:
C902_R3BH002__camdriver0.dat
// 2008-04-11 Rev 1.8 Release for Alona
// 2008-04-09 Rev 1.7 Release for Alona
update/changelog:
C902_R3CA033__camdriver0.dat
// 2008-05-12 Rev 1.9 Release for Alona
// 2008-04-11 Rev 1.8 Release for Alona
update/changelog:
seq_vf_start =
$cf.02 0 // If not in any draft mode
#CHANGE_MODE(33,00) // MODE_MAIN
#COM_EVENT(43,00) // MANUAL_FOCUS = 00, Infinity
#COM_EVENT(5A,01) // FLASH_INFO = 1
$sf.02 1 // Set draft flag to 1
$se 00 // Set snapshot operation to normal
$cl
$cf.00 1 // If imstab mode
$cf.01 1 // If HS mode
$d0005
#CHANGE_MODE(38,00) // IS HS mode
$cl // else
$d0005
#CHANGE_MODE(35,00) // IS mode
$cx
$cl
$cf.01 1 // If HS mode
$d0005
#CHANGE_MODE(37,00) // HS mode
$cl // else
$d0005
#CHANGE_MODE(34,00) // normal draft
#COM_EVENT(5A,01) // FLASH_INFO =1
$cx
$cx
$cx
;
seq_ss_stop = ;
C902_R3CA037_camdriver0.dat
// 2008-05-12 Rev 1.9 Release for Alona
// 2008-04-11 Rev 1.8 Release for Alona
update/changelog:
seq_vf_start =
$cf.02 0 // If not in any draft mode
#CHANGE_MODE(33,00) // MODE_MAIN
#COM_EVENT(43,00) // MANUAL_FOCUS = 00, Infinity
#COM_EVENT(5A,01) // FLASH_INFO = 1
$sf.02 1 // Set draft flag to 1
$se 00 // Set snapshot operation to normal
$cl
$cf.00 1 // If imstab mode
$cf.01 1 // If HS mode
$d0005
#CHANGE_MODE(38,00) // IS HS mode
$cl // else
$d0005
#CHANGE_MODE(35,00) // IS mode
$cx
$cl
$cf.01 1 // If HS mode
$d0005
#CHANGE_MODE(37,00) // HS mode
$cl // else
$d0005
#CHANGE_MODE(34,00) // normal draft
#COM_EVENT(5A,01) // FLASH_INFO =1
$cx
$cx
$cx
;
seq_ss_stop = ;
C902_R3DA026_camdriver0.dat
// 2008-07-23 Rev 2.1 Released by Markus Bylesjo for Alona
// 2008-05-29 Rev 2.0 Released by Petter Ostlund for Alona
update/changelog:
seq_init = // This sequence is run after power_on
$s7 01 // Quick start
#COM_EVENT(5A,01) // FLASH_INFO =1
seq_vf_config_25 = // VT
$cf.02 0 // If not in any draft mode
#CHANGE_MODE(33,00) // MODE_MAIN
$sf.02 1 // Set draft flag to 1
$cl
#CHANGE_MODE(34,00) // normal draft
$cx
seq_vf_config_26 = // VT
$cf.02 0 // If not in any draft mode
#CHANGE_MODE(33,00) // MODE_MAIN
$sf.02 1 // Set draft flag to 1
$cl
#CHANGE_MODE(34,00) // normal draft
$cx
seq_vf_config_29 = // VR
$s7 00
seq_vf_config_2a = // VR
$s7 00
seq_vf_config_2b = // VR
$s7 00
seq_vf_config_2c = // VR
$s7 00
seq_vf_start =
$c7 01
$cl
$cf.02 0 // If not in any draft mode
#CHANGE_MODE(33,00) // MODE_MAIN
#COM_EVENT(43,00) // MANUAL_FOCUS = 00, Infinity
#COM_EVENT(5A,01) // FLASH_INFO = 1
$sf.02 1 // Set draft flag to 1
$se 00 // Set snapshot operation to normal
$cl
$cf.00 1 // If imstab mode
$cf.01 1 // If HS mode
$d0005
#CHANGE_MODE(38,00) // IS HS mode
$cl // else
$d0005
#CHANGE_MODE(35,00) // IS mode
$cx
$cl
$cf.01 1 // If HS mode
$d0005
#CHANGE_MODE(37,00) // HS mode
$cl // else
$d0005
#CHANGE_MODE(34,00) // normal draft
#COM_EVENT(5A,01) // FLASH_INFO =1
$cx
$cx
$cx
$cx
$s7 00
;
seq_ss_stop =
$cf.03 1 // If JPEG
$ce 00 // IF normal snapshot
#TO_DRAFT // Also sets the draft flag
#COM_EVENT(43,00) // MANUAL_FOCUS = 00, Infinity
$s7 00 //
$cx
$cx
;
C902_R3DA028_ camdriver0.dat
// 2008-07-23 Rev 2.1 Released by Markus Bylesjo for Alona
// 2008-05-29 Rev 2.0 Released by Petter Ostlund for Alona
update/changelog:
seq_init = // This sequence is run after power_on
$s7 01 // Quick start
#COM_EVENT(5A,01) // FLASH_INFO =1
seq_vf_config_25 = // VT
$cf.02 0 // If not in any draft mode
#CHANGE_MODE(33,00) // MODE_MAIN
$sf.02 1 // Set draft flag to 1
$cl
#CHANGE_MODE(34,00) // normal draft
$cx
seq_vf_config_26 = // VT
$cf.02 0 // If not in any draft mode
#CHANGE_MODE(33,00) // MODE_MAIN
$sf.02 1 // Set draft flag to 1
$cl
#CHANGE_MODE(34,00) // normal draft
$cx
seq_vf_config_29 = // VR
$s7 00
seq_vf_config_2a = // VR
$s7 00
seq_vf_config_2b = // VR
$s7 00
seq_vf_config_2c = // VR
$s7 00
seq_vf_start =
$c7 01
$cl
$cf.02 0 // If not in any draft mode
#CHANGE_MODE(33,00) // MODE_MAIN
#COM_EVENT(43,00) // MANUAL_FOCUS = 00, Infinity
#COM_EVENT(5A,01) // FLASH_INFO = 1
$sf.02 1 // Set draft flag to 1
$se 00 // Set snapshot operation to normal
$cl
$cf.00 1 // If imstab mode
$cf.01 1 // If HS mode
$d0005
#CHANGE_MODE(38,00) // IS HS mode
$cl // else
$d0005
#CHANGE_MODE(35,00) // IS mode
$cx
$cl
$cf.01 1 // If HS mode
$d0005
#CHANGE_MODE(37,00) // HS mode
$cl // else
$d0005
#CHANGE_MODE(34,00) // normal draft
#COM_EVENT(5A,01) // FLASH_INFO =1
$cx
$cx
$cx
$cx
$s7 00
;
seq_ss_stop =
$cf.03 1 // If JPEG
$ce 00 // IF normal snapshot
#TO_DRAFT // Also sets the draft flag
#COM_EVENT(43,00) // MANUAL_FOCUS = 00, Infinity
$s7 00 //
$cx
$cx
;
seq_init = // This sequence is run after power_on
$s7 01 // Quick start
#COM_EVENT(5A,01) // FLASH_INFO =1
seq_vf_config_25 = // VT
$cf.02 0 // If not in any draft mode
#CHANGE_MODE(33,00) // MODE_MAIN
$sf.02 1 // Set draft flag to 1
$cl
#CHANGE_MODE(34,00) // normal draft
$cx
seq_vf_config_26 = // VT
$cf.02 0 // If not in any draft mode
#CHANGE_MODE(33,00) // MODE_MAIN
$sf.02 1 // Set draft flag to 1
$cl
#CHANGE_MODE(34,00) // normal draft
$cx
seq_vf_config_29 = // VR
$s7 00
seq_vf_config_2a = // VR
$s7 00
seq_vf_config_2b = // VR
$s7 00
seq_vf_config_2c = // VR
$s7 00
seq_vf_start =
$c7 01
$cl
$cf.02 0 // If not in any draft mode
#CHANGE_MODE(33,00) // MODE_MAIN
#COM_EVENT(43,00) // MANUAL_FOCUS = 00, Infinity
#COM_EVENT(5A,01) // FLASH_INFO = 1
$sf.02 1 // Set draft flag to 1
$se 00 // Set snapshot operation to normal
$cl
$cf.00 1 // If imstab mode
$cf.01 1 // If HS mode
$d0005
#CHANGE_MODE(38,00) // IS HS mode
$cl // else
$d0005
#CHANGE_MODE(35,00) // IS mode
$cx
$cl
$cf.01 1 // If HS mode
$d0005
#CHANGE_MODE(37,00) // HS mode
$cl // else
$d0005
#CHANGE_MODE(34,00) // normal draft
#COM_EVENT(5A,01) // FLASH_INFO =1
$cx
$cx
$cx
$cx
$s7 00
;
seq_ss_stop =
$cf.03 1 // If JPEG
$ce 00 // IF normal snapshot
#TO_DRAFT // Also sets the draft flag
#COM_EVENT(43,00) // MANUAL_FOCUS = 00, Infinity
$s7 00 //
$cx
$cx
;
C902_R3EA037_ camdriver0.dat
// 2008-07-23 Rev 2.1 Released by Markus Bylesjo for Alona
// 2008-05-29 Rev 2.0 Released by Petter Ostlund for Alona
update/changelog:
seq_init = // This sequence is run after power_on
$s7 01 // Quick start
#COM_EVENT(5A,01) // FLASH_INFO =1
seq_vf_config_25 = // VT
$cf.02 0 // If not in any draft mode
#CHANGE_MODE(33,00) // MODE_MAIN
$sf.02 1 // Set draft flag to 1
$cl
#CHANGE_MODE(34,00) // normal draft
$cx
seq_vf_config_26 = // VT
$cf.02 0 // If not in any draft mode
#CHANGE_MODE(33,00) // MODE_MAIN
$sf.02 1 // Set draft flag to 1
$cl
#CHANGE_MODE(34,00) // normal draft
$cx
seq_vf_config_29 = // VR
$s7 00
seq_vf_config_2a = // VR
$s7 00
seq_vf_config_2b = // VR
$s7 00
seq_vf_config_2c = // VR
$s7 00
seq_vf_start =
$c7 01
$cl
$cf.02 0 // If not in any draft mode
#CHANGE_MODE(33,00) // MODE_MAIN
#COM_EVENT(43,00) // MANUAL_FOCUS = 00, Infinity
#COM_EVENT(5A,01) // FLASH_INFO = 1
$sf.02 1 // Set draft flag to 1
$se 00 // Set snapshot operation to normal
$cl
$cf.00 1 // If imstab mode
$cf.01 1 // If HS mode
$d0005
#CHANGE_MODE(38,00) // IS HS mode
$cl // else
$d0005
#CHANGE_MODE(35,00) // IS mode
$cx
$cl
$cf.01 1 // If HS mode
$d0005
#CHANGE_MODE(37,00) // HS mode
$cl // else
$d0005
#CHANGE_MODE(34,00) // normal draft
#COM_EVENT(5A,01) // FLASH_INFO =1
$cx
$cx
$cx
$cx
$s7 00
;
seq_ss_stop =
$cf.03 1 // If JPEG
$ce 00 // IF normal snapshot
#TO_DRAFT // Also sets the draft flag
#COM_EVENT(43,00) // MANUAL_FOCUS = 00, Infinity
$s7 00 //
$cx
$cx
;
[ This Message was edited by: brazuka on 2009-03-20 15:41 ] |
brazzuka's
Joined: Nov 14, 2007
Posts: > 500
From: South World-Antartida-Sweden
PM, WWW
|
Update 2009-02-09
v51.46_Slideshot™ c902
===================
Version v51.46 changelog:
===================
Scenes:
All scenes are pre configured and adapted for each type of environment.
Scene Nigth now with fast shutter speed slow/fast and more the scene nigth with shutter speeed 2s
Colors Correction WB:
-Correction Auto for photos with luminosity
-Colors Correction is no longer influencing the led flash.
-To turn off the colors correction during the day, simply choose "Led Flash Off" menu "Led Flash" or shortcut key "#". During the night, no color correction works, get a good picture.
Led Flash Luxon™:
-Led flash turn on in any condition or situation
-Led flash with High light turn on [enable]
-Led flash with Low light turn on [enable]
About Colors Correction works together with Led Flash Luxon™:
-Led Flash turn on [enable] in your C902 the colors correction off [disable]
-Led Flash turn off [disable] in your C902 the colors correction on [enable]
What´s this Led Flash Luxon™ and Why??
Today, the LEDs are manufactured to deliver high current,is the use of high-current LEDs where a high brightness LED is combined with a super-capacitor, which releases the load quickly when the flash is fired, generating one shot short, but with a much greater intensity.
These latest generation of LEDs for camera mobile phone have a low voltage because of using only 2.3 to 5.5 volts and store a lot of energy thanks to its high capacitance.
Advantage:
Low voltage.
Consume less energy.
High emission of light.
Cheaper, more compact and simpler to implement.
Works as a light for lighting for recording video.
Disadvantage
Don´t emits a light strong in a very short time.
Can not take pictures with more vivid colors.
Do not have a satisfactory response in environments with little or no light.
Manual EV original and Manual Shutter Speed LED Flash
Now you "user" have the freedom to have two controls in your hands.
Vídeo:
Now Two [2] resolutions for video recording...
-352x288 video recording 20fps to 24 fps [CIF]
-320x240 video recording 25fps to 30 fps [QVGA]
Format------Video Resolution
SQCIF--------------128 × 96
QCIF---------------176 × 144
CIF-----------------352 × 288 =>v51.46_Slideshot™ for c902
4CIF----------------704 × 576
16CIF---------------1408 × 1152
NOW ISO MANUAL FOR C902
Now you can have a full features for your c902 "user" so start with iso manual and enjoy!
Replaced *effects by iso manual
//==========================EFFECTS=ISO MANUAL
// Property 8, Effects=ISO MANUAL
0 => normal = ISO Auto,
1 => negative = ISO 100
2 => solarize = ISO 200
3 => sepia = ISO 400
4 => black&white = ISO 800
//==========================EFFECTS=ISO MANUAL
Why replace effects by iso??? About *effects:
If you "user" like of effects; as negative, solarize, sepia and black&white to use on the photos, exist many programs free for this purpose therefore we seek something that is relevant and essential for a good photo, then the possibility of using the iso manual.
Functions Seetings:
->Manual Shutter Speed Slow/Fast only for scene nigth [ok]avaliable
->Manual Shutter Speed auto [ok]avaliable
->Manual Shutter Speed LED Flash [ok]avaliable
->FPS [ok]avaliable
->Contrast [ok]avaliable
->Exposure [ok]avaliable
->Focus (works only for infinite) [ok]avaliable
->Brightness [ok]avaliable
->Sharpness [ok]avaliable
->Colors Saturation [ok]avaliable
->Hue [ok]avaliable only if necesary
->Manual ISO [ok]avaliable
->Manual ISO LED Flash [ok]avaliable
->Manual Color Correction WB [ok]avaliable
->Manual Color Correction LED Flash [ok]avaliable
->Led Flash Luxon™ implemented [ok]avaliable
Customize settings for c902
All settings and functions are modified within inside of the camdriver in automode and scenes.
In camdriver is a part called "customize" where are the "functions settings", it puts the values that you want for each scene.
v51.46_Slideshot™ c902
Download:
http://www.4shared.com/file/1[....]/v5146_Slideshot_for_c902.html
[ This Message was edited by: brazzuka's on 2009-07-18 16:55 ] |
0kti
Joined: Dec 24, 2006
Posts: 290
From: Poland
PM, WWW
|
download link?
Samsung Omnia 8GB + 8GB MicroSD |
mochuothp
Joined: Oct 11, 2008
Posts: 414
PM |
can you put manual marco on it ??? 
and where is the link ???
|
brazzuka's
Joined: Nov 14, 2007
Posts: > 500
From: South World-Antartida-Sweden
PM, WWW
|
test
sample pics c902 iso manual without led flash
iso auto
iso100
iso200
iso400
iso800~1000
|
0kti
Joined: Dec 24, 2006
Posts: 290
From: Poland
PM, WWW
|
download link?
Samsung Omnia 8GB + 8GB MicroSD |
brazzuka's
Joined: Nov 14, 2007
Posts: > 500
From: South World-Antartida-Sweden
PM, WWW
|
//===============================EFFECTS=ISO
// Property 8, Effects=ISO
//---------------------------------------------------
// 0 => normal = ISO Auto, 1 => negative = ISO 100, 2 => solarize = ISO 200, 3 => sepia = ISO 400
// 4 => black&white = ISO 800
//===============================EFFECTS=ISO
Note:
-Iso works only without Led Flash (off) ok avaliable
-Colors Corrections WB ok avaliable
-Colors Corrections Led Flash ok avaliable
-Test Iso Led Flash
-Test Forced Led Flash automode and for all scenes
[ This Message was edited by: brazuka on 2009-04-01 15:17 ] |
geele76
Joined: Sep 23, 2007
Posts: 23
PM |
brzuka,
#SET_REG(95,04) - Default ISO
#SET_REG(95,01) - ISO 100
#SET_REG(95,04) - ISO 200
#SET_REG(95,07) - ISO 400
#SET_REG(95,0a) - ISO 800
#SET_REG(95,od) - ISO 1600
// Property 8, Effects (Manual ISO)
//---------------------------------------------------
// 0 => normal, 1 => negative, 2 => solarize, 3 => sepia
// 4 => black&white
seq_set_prop_8_0 =
#TO_DRAFT
$sd 02
$"CAMDRIVER0: Flash LED AUTO"
$sc 00
#SET_REG(95,04) // Default ISO 200
#COM_EVENT(02,00)
#COM_EVENT(11,00)
#COM_EVENT(5A,01) // FLASH_INFO = 1 Auto ISO
$cl $cx $cx $cx $cx $cx;
seq_set_prop_8_1 = // ISO 100
#TO_DRAFT
$sd 02
$"CAMDRIVER0: Flash LED AUTO"
$sc 01
#SET_REG(61,01)
#SET_REG(95,01)
#COM_EVENT(02,04)
#COM_EVENT(5A,01) // FLASH_INFO = 1
$cl $cx $cx $cx $cx $cx;
seq_set_prop_8_2 = // ISO 200
#TO_DRAFT
$sd 02
$"CAMDRIVER0: Flash LED AUTO"
$sc 04
#SET_REG(61,04)
#SET_REG(95,04)
#COM_EVENT(02,04)
#COM_EVENT(5A,01) // FLASH_INFO = 1
$cl $cx $cx $cx $cx $cx;
seq_set_prop_8_3 = //ISO 400
#TO_DRAFT
$sd 02
$"CAMDRIVER0: Flash LED AUTO"
$sc 07
#SET_REG(61,07)
#SET_REG(95,07)
#COM_EVENT(02,04)
#COM_EVENT(5A,01) // FLASH_INFO = 1
$cl $cx $cx $cx $cx $cx;
//seq_set_prop_8_4 = ; // ISO 800
//seq_set_prop_8 =
//$s5 %0
//#TO_DRAFT
// #COM_EVENT(53,$w5)
// ;
It's my mod. working, but the flash work only somtimes in auto mode. where is my error? |
brazzuka's
Joined: Nov 14, 2007
Posts: > 500
From: South World-Antartida-Sweden
PM, WWW
|
@geele76
first have to know the register that enable forced led flash in c902.
Forced Led Flash:
#SET_REG(91,XX) => Forced Flash ???
XX=01 to 04 failed
XX=13 failed
XX=05 to 12 test
ISO for c902 (only work without Led Flash)
#SET_REG(61,XX)
XX=01 to (n)
ISO Led Flash for c902
#SET_REG(95,XX)
XX=01 to (n)
Second
When the LED FLASH (on) turn off disable colors correction WB
LED FLASH (off) turn on enable colors correction WB
Colors correction:
Colors correction WB normal
Colors correction LED FLASH
| |
|
Access the forum with a mobile phone via esato.mobi
|
Posted: 2008-09-25 14:27
