| Author |
K800 - living dead (fully functional) |
Goldmen
Joined: Oct 07, 2007
Posts: > 500
From: Bulgaria
PM, WWW
|
1/Try to clean phone`s connector
2/search & download SETool Lite 1.08 or higher from 4shared
3/start it
4/push "Identify" button
5/hold together 2 and 5 on phone`s keypad,not "C"
6/plug the cable and wait a few seconds...
Now SETool must be recognize your phone...
If not...sorry...  ,you need service...
[ This Message was edited by: Goldmen on 2008-08-10 18:42 ] |
|
|
mele
Joined: Jul 18, 2006
Posts: 16
PM |
okei ...now it does something
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701021213 CERT:N/A
FLASH CID:52 COLOR:RED
Model:K800i
MAPP CXC article: R1KG001 prgCXC1250210_GENERIC_WI
MAPP CXC version: R1KG001
Language Package:EUROPE_4
CDA article: CDA102568/13
CDA version: R4A
Default article: cxc1250490
Default version: R1KG001
Network LOCKED
Operator: 244-05
Elapsed:8 secs.
is there hope that i dont have take it to service
[ This Message was edited by: mele on 2008-08-10 19:11 ] |
Goldmen
Joined: Oct 07, 2007
Posts: > 500
From: Bulgaria
PM, WWW
|
On 2008-08-10 20:09:50, mele wrote:
is there hope that i dont have take it to service
 Yep!
Your phone is not dead!
May be it will work without reflash!
If not,you can try reflash it with correct firmware files!
You can use XS++,SETool,FarManager etc.... |
mele
Joined: Jul 18, 2006
Posts: 16
PM |
i was playing with setool and came alive. Im now reflashing it with xs++, with proper firmware ( i hope so).
i come teasing you again, if something goes wrong  .
|
Goldmen
Joined: Oct 07, 2007
Posts: > 500
From: Bulgaria
PM, WWW
|
You`re welcome!
I`ll be here later! |
mele
Joined: Jul 18, 2006
Posts: 16
PM |
It seems that my phone is working again.
I use SEtool lite to identify it and push 2 and 5 at the same time. It identifies the phone and BOOM the screen went on and it starts loading my phone. After then everything went well.
I would like to thank everyone who tried and was helping me through these difficult times  .
Now i know where i can come back if i have problems with my phone.
Thank You! |
hyperion1707
Joined: Sep 05, 2007
Posts: 72
From: Romania
PM |
It would be just as well to save your GDFS, if you didn't already. |
strizlow800
Joined: Aug 23, 2006
Posts: > 500
From: Macedonia, Skopje
PM |
Yeah with GDFS backup nothing can stop you from reparing your phone...
|
mele
Joined: Jul 18, 2006
Posts: 16
PM |
I have now taken backup of GDFS
btw....it seems i still have some problems when i turn my phone off. It still does nothing when turn phone back on and i have to start it through setool by pushing 2 and 5 at the same time when identifying.
Whats with that?
14:16:35| Baseband ID: 9900
14:16:35| Protocol Version: 3.1
14:16:35| Phone name detected!
14:16:35|
14:16:35| Profiling SEMC phone...
14:16:35| Platform: DB2020
14:16:35| OTP CID: 49
14:16:35| EROM CID: 52
14:16:35| EROM Color: Red
14:16:35| IMEI: 35170701xxxxxx
14:16:35| Phone ID: K800
14:16:35| Region: EUROPE_4
14:16:35| CDA: CDA102568/13 R4A
14:16:35| Firmware Version: R1KG001
14:16:35| EROM: R3A011
14:16:35| Ready for operation!
and whats with the bold one, im sure that in installed different version of firmware .
ps. Phone says that i have R8BF003
[ This Message was edited by: mele on 2008-08-11 12:21 ] |
Aware
Joined: Jun 24, 2006
Posts: > 500
From: Oxon, UK
PM |
Hmm...just to say: you have an EROM of R3A011, yet it's CID52?????
R3A011 was original EROM on CID 49 K800's at release time - and is well known for causing boot problems!! 
You should be on at LEAST R3A016, more likely R3A022(first CID52 EROM which was available)...... 
KulanKendi will update EROM for free, but will change it to CID53(not good). XS++ will change it to R3A022 CID52(also free, thankfully!), assuming it can detect your device...so I'd advise that......
HTH
 p990i(r6d), n82-1(20.0.062) * treat people as you expect to be treated! * a-zott platinum/tttt in ~3 years...  rip expanded call lists! |
tranced
Joined: Jan 19, 2006
Posts: > 500
From: Santo Domingo, wonDeRland
PM |
hi
@aware: if you think that's the problems because the erom this post will help him(hope so):
On 2008-03-07 10:27:38, markmaslin wrote:
hi chaps
just thought i would let you know that i managed to get my phone working, it looks like it was the erom that was the problem, i tried to use the wotanserver tool but that didnt work so i used a tool from another website think it was called kulkendi, any ways here is the link to the information.
http://www.esato.com/board/viewtopic.php?topic=136077#post1833443
thanks again for all your help :0)
mark
use this
sory my englisch !
-first instal USBFlash Driver http://www.kulankendi.com/index2.php?pStrona=download
-in KK Client please option "EROM Update" and Login:kulan and Password:kulan
-now pres "Flasch"
...good luck
taken from here: http://www.esato.com/board/viewtopic.php?topic=166350&start=15
|
Sky Hi
Joined: Jan 20, 2007
Posts: 106
PM |
OK. Instead of simply enjoying your phone with its original f/w, you end-up spending hours and hours trying to resurrect your f#@ked-up phone. I wonder; how many phones have to end like this before you understand it? Did you buy your phone to enjoy using it or to enjoy screwing it? 
10 years non-stop SE user:
T300->K500->K700->K800->K810->C905->Xperia Mini |
mele
Joined: Jul 18, 2006
Posts: 16
PM |
okey! i was able to upgrade EROM to R3A016 with kulan. Should this work now or should i upgrade it more?
[ This Message was edited by: mele on 2008-08-11 17:05 ] |
|
|
Posted: 2008-08-10 19:19
Sony Ericsson software/hardware support! 
