| Author |
Sony Ericsson T650i Discussion |
Lunion
Joined: Jul 14, 2007
Posts: > 500
From: East Coast, UK
PM, WWW
|
On 2008-04-04 20:13:51, nebraska wrote:
thank you so much my friend ! 
I'm going to try that.
do you think the method is okay with all version of CID?
I've never done it myself,
It might be an idea to ask in that thread, get some more info from people that know what they are doing 
If you live in a glass house, don't be chuckin stuff about. |
|
|
X-Plode
Joined: Oct 29, 2004
Posts: 55
From: Titikaka
PM |
nebraska,
It's very easy to do through XS++ or SeTool2lite.
I've flashed k750, z520 and t650 with it. All you need are three files: main, fs and custom pack corresponding to main and fs.
Then just put them into respective paths, press "FLASH", turn off the phone, press "C" button, connect to PC and enjoy! It won't take longer than 20 minutes if it's ok.
|
nebraska
Joined: Jan 01, 2008
Posts: 241
PM |
thank you for your answer! it is cool it seems so simple...
do you think I could only replace MAIN, because I just want to fix a pbl of delay sound/pic in my camera when I take movies...
thanks for your answer !
PS: and where can I find french fw plz? |
X-Plode
Joined: Oct 29, 2004
Posts: 55
From: Titikaka
PM |
nebraska,
"french" in not firmware but custompack. Nevertheless, you may find any FW you like on www.topsony.com.
I think you will need some EMEA_1...6 FW.
Remember, MAIN, FS and custompack should be of the same number and CID. |
nebraska
Joined: Jan 01, 2008
Posts: 241
PM |
On 2008-04-08 08:49:41, X-Plode wrote:
nebraska,
"french" in not firmware but custompack. Nevertheless, you may find any FW you like on http://www.topsony.com.
I think you will need some EMEA_1...6 FW.
Remember, MAIN, FS and custompack should be of the same number and CID.
ok thanks very much!
and concerning this question, have you an idea?
"do you think I could only replace MAIN, because I just want to fix a pbl of delay sound/pic in my camera when I take movies... "
|
X-Plode
Joined: Oct 29, 2004
Posts: 55
From: Titikaka
PM |
nebraska,
Not sure but u may try. IMHO, that's only SEUS that may flash single MAIN without touching FS and cust. If u try to do it as I've mentioned then I think to flash all the three files again.
P.S. As I remember, u may put MAIN and FS of the same number and CID but use different custpacks. When flashing with XS, it shows which languages are in a custpack just before flashing so the choice is yours. That's it!
Anyway, u may change everything at any time by reflashing. |
nebraska
Joined: Jan 01, 2008
Posts: 241
PM |
hello!
This evening I wanted to flash the fw in my phone but when connecting it to XS++ it don't want to start!
It is the first time it makes me that, I've already used XX++ to mod the camdriver and until now no have pbl...
When I plug the phone pressing on "C" it beeps 2 times quickely and nothing change..
what have I done wrong please?? |
divya89
Joined: Feb 27, 2008
Posts: 3
PM |
On 2007-11-15 00:29:51, iamcrunchie wrote:
1. did you lose the light effects outside of the camera, like when receiving SMS, or with the built in themes?
2. do you have track ID?
3. does the light strip on the back of the camera still light up with sms?
4. any bugs so far?
-thanks in advance for answering the ???s
1. nope all other effects seem to work fine.
2. yes i have TrackID
3. Yes , see 1 :wink:
4. nope no bugs
I did actually have a K770i that i recently got as a free upgrade but i sold it on.
They may be the same phone inside but the casing/buttons on the k770i feel a bit flimsy and nowhere near as sturdy, it is noticeable thicker than the t650i.
The k770i lens cover is very cool though, shame it makes the phone thicker.
I'm sticking with my t650i blue hybrid.
I did actually put the k770i back cover on my t650i, it looked a bit daft with blue/brown contrast but in theory it could look good i guess with the right colour.
[ This Message was edited by: iamcrunchie on 2007-11-14 23:35 ]
Hi!
I'm new around here..And my BlackT650i is on it's way to get to me :)
1)Can you please tell me how to get track ID?
Because I checked sonyericsson.com and this phone (SE black t650i), does not seem to have Track ID as compared to other phones.
2)Do you need an active internet connection for Track ID to work?
3)Also, do high SAR levels actually damage brain cells? :S
Thanks :D |
X-Plode
Joined: Oct 29, 2004
Posts: 55
From: Titikaka
PM |
nebraska,
Looks like usbflash drivers have crashed. The tend to from time to time.
Try to reinstall them |
NightBlade
Joined: Jul 29, 2007
Posts: > 500
From: Nessebar, Bulgaria
PM |
@divya89:
1)It should deffo have TrackID.
2)Yes, you do.
3)Uh, don't bother with that SAR level crap. We've had discussions about this. Sure it can give you a slight headache if you've been talking for an hour or so, but the radio waves don't really cause any damage... at least in the short run (10 yrs.). That has been scientifically proven, too! |
nebraska
Joined: Jan 01, 2008
Posts: 241
PM |
On 2008-04-14 08:58:03, X-Plode wrote:
nebraska,
Looks like usbflash drivers have crashed. The tend to from time to time.
Try to reinstall them
thanks for ur answer. Yes I reinstalled them but no change. I think it is my usb port, it begins to bug sometimes with some devices. I have to flash my phone with another pc that's the only solution now |
nebraska
Joined: Jan 01, 2008
Posts: 241
PM |
hello
I've just succeed to flash my phone with SEUS on another pc, everything's ok and now I have the R8BC004 071211 firmware.
My problem of delay in videos is fixed now
I'm going now to install the polish camdriver to see the improvments
|
nebraska
Joined: Jan 01, 2008
Posts: 241
PM |
I've just succeed to flash my phone with SEUS on another pc, everything's ok and now I have the R8BC004 071211 firmware.
My problem of delay in videos is fixed now
I'm going now to install the polish camdriver to see the improvments
|
nebraska
Joined: Jan 01, 2008
Posts: 241
PM |
help I have a new pbl when using xs++....
My phone is recognized, but when I clik on "start FSX" to replace the camdriver, I get an error message:
15:02:15| Hold 'C' button on phone and connect phone NOW.
15:02:15| You have 30 seconds...
15:02:15|
15:02:23| Baseband ID: 9900
15:02:23| Protocol Version: 3.1
15:02:24| Phone name detected!
15:02:24|
15:02:24| Profiling SEMC phone...
15:02:24| Platform: DB2020
15:02:24| OTP CID: 51
15:02:24| EROM CID: 53
15:02:24| EROM Color: Red
15:02:24| IMEI: 35796601xxxxxx
15:02:24| Phone ID: T650
15:02:24| Region: EUROPE_5
15:02:24| CDA: CDA102568/14 R8A
15:02:24| Firmware Version: R8BC004
15:02:24| EROM: R3A022
15:02:24| Ready for operation!
15:02:30| After making any changes with FSX
15:02:30| you must press the 'Shutdown' button
15:02:31| Sorry, your phone is NOT SUPPORTED
15:02:31| Error: FSX failed.
15:02:31| FSX Shutdown!
15:02:33| Disconnected... Unplug the phone
what to do please??? |
nebraska
Joined: Jan 01, 2008
Posts: 241
PM |
oh... I have no luck it is due to the CID53 not recognized by XS++ (and other prog)
I have to wait till a program able to do that see the day....
is it sure that noone replaced his camdriver here with a CID53?? |
|
|
Posted: 2008-04-04 20:15
