| Author |
Super camera driver for k750/w800/w810 |
MiHaU
Joined: Feb 06, 2007
Posts: 145
From: Poland
PM |
Just took few pictures with Kriomag's first mode with manual focus.
All with ENM.
1
2
3
4 |
|
|
EduX
Joined: Jun 30, 2006
Posts: 92
From: Slovakia, Bratislava
PM |
On 2007-04-06 21:42:02, Kriomag wrote:
Kriomag v20.0
- Base driver v4.5 (W810i)
- ENM/LedENM
- 3 VR Modes - fixed! (NormalMode=15fps, NightMode=10fps, EnhanceNightMode=5fps)
- Smoother Preview on Viefinder
- AE Lock
- SPOT Support (Normal Mode = SPOT ON, FINE Mode = SPOT OFF)
- Manual Focus (1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0)
- Manual Focus + Macro = Super Manual Focus (zoom x8 for preview - half-press shutter ON/OFF)
- JPEG 89% (for Normal & Fine)
- still no zoom (at all...)
http://s28.quicksharing.com/v/6837066/Kriomag_v20.0.zip.html
Instruction for Super Manual Focus:
When in range 1.1-4.0 once half-press shutter for zoom preview - now you can change focus (+/-) with fine tuning  half-press shutter again to preview all picture, press shutter for shot 
PS. Still cant get zoom working for VR...  Chengrong help me!
[ This Message was edited by: Kriomag on 2007-04-06 21:25 ]
8x zoom by manual focus is very, very useful thing. Great work! Thank You. |
EduX
Joined: Jun 30, 2006
Posts: 92
From: Slovakia, Bratislava
PM |
On 2007-04-06 03:21:20, kopritis wrote:
This is my new mod... Based on 5.3 original sony camdriver
1. Fast Focus
2. Very sharp images at day and night with ENM
3. 87% compression at fine mod and 75% compression at normal mod
4. 15fps video recording at day light an normal conditions and ~8fps with nightmod on
5. ENHANCE NIGHT MODE when you "turn the nightmode on and macro on"
6. My mod on Color Correction
http://www.rogepost.com/n/9597613115
Photos are really sharp in the low light too, without a noise. The new compression is much better - stable. Nice work.
Could you, please little bit correct the color? Especially for led on? It is more blueish then it should be (in my opinion).
kopritis 5.3 day light
7.7 Final - Kriomag Mod day light
kopritis 5.3 in the dark with led on
7.7 Final - Kriomag Mod in the dark with led on
 |
AllanJacques
Joined: Mar 01, 2007
Posts: 73
PM |
@Kriomag
Man, just one comment about 20.0...
foreget everythig i said before, this so far the best of the best! Bro, almost perfect pictures! great sahrpness and colors and quality in general!
just awesome!!!
|
petitflo01
Joined: Apr 01, 2007
Posts: 35
PM |
Thx Kriomag I think right now Your W810 driver is the best for this phone
SEE this kick assing pix , ENM/LED + Manual focus !
And the other, only ENM + manual focus !
WONDERFULL
 |
comhank
Joined: Mar 11, 2007
Posts: 12
PM |
hi..all
i need camdriver Mladen8.8 base on v.7.7final
would you like to improve the camdriver which have mannual focus when macro & nightmode on same as 8.54 cheng Rong anyware,I need 3vr mode
plzz helpme
thankyou
sory my bad eng |
mladen750i
Joined: Oct 18, 2006
Posts: 59
PM, WWW
|
On 2007-04-07 03:37:08, comhank wrote:
hi..all
i need camdriver Mladen8.8 base on v.7.7final
would you like to improve the camdriver which have mannual focus when macro & nightmode on same as 8.54 cheng Rong anyware,I need 3vr mode
plzz helpme
thankyou
sory my bad eng
http://camdriver0.farvista.ne[....]ed_on_v7.7final_SUPER_MODE.rar |
comhank
Joined: Mar 11, 2007
Posts: 12
PM |
^
^
Thankyou^^ |
AllanJacques
Joined: Mar 01, 2007
Posts: 73
PM |
@Kriomag
yeah, definitaly great driver... but a little blue when led is on... could something be done about this? thanks in advance! |
onthespot64
Joined: Jan 02, 2007
Posts: 17
PM |
To all modders. I'd like to help out a bit concerning taking pictures with the led on. Its either the pictures come out too cold (blueish) or warm (yellow/redish).
The solution to this problem is rather simple and you dont need to edit the colors settings.
All you have to do is this.
In this line:
LED_WB_SET= 06 02 00 01 05 11 #CMD_END
Replace the 05 with this (02):
LED_WB_SET= 06 02 00 01 02 11 #CMD_END
Thats the only thing you need to edit! Why 02? Because when you use the Led its light is similar to fluorescent.
I do this to every single cam driver that I download (Zuza 1, 7,7FL/Etd, 0.9, 6.9,8.53 etc....) and it has done me well, solving the cold or warm pictures. Try it, give it a shot! No need to fix/edit the color settings and give yourself a headache. WB is everything to a good picture....... well getting the right colors that is. =D
GOOD LUCK! =D
[ This Message was edited by: onthespot64 on 2007-04-07 05:06 ] |
AllanJacques
Joined: Mar 01, 2007
Posts: 73
PM |
On 2007-04-07 05:56:40, onthespot64 wrote:
To all modders. I'd like to help out a bit concerning taking pictures with the led on. Its either the pictures come out too cold (blueish) or warm (yellow/redish).
The solution to this problem is rather simple and you dont need to edit the colors settings.
All you have to do is this.
In this line:
LED_WB_SET= 06 02 00 01 05 11 #CMD_END
Replace the 05 with this (02):
LED_WB_SET= 06 02 00 01 02 11 #CMD_END
Thats the only thing you need to edit! Why 02? Because when you use the Led its light is similar to fluorescent.
I do this to every single cam driver that I download (Zuza 1, 7,7FL/Etd, 0.9, 6.9,8.53 etc....) and it has done me well, solving the cold or warm pictures. Try it, give it a shot! No need to fix/edit the color settings and give yourself a headache. WB is everything to a good picture....... well getting the right colors that is. =D
GOOD LUCK! =D
[ This Message was edited by: onthespot64 on 2007-04-07 05:06 ]
yeah... that pretty much solves the problem! great solution, no changes at all! |
onthespot64
Joined: Jan 02, 2007
Posts: 17
PM |
@AllanJacques
Did you try setting your WB to Florescent on your phone? Try it and see if that works. |
marcpogs
Joined: May 26, 2004
Posts: 89
PM |
@kriomag
great camdriver amigo! but just one question, i dont think it supports my MXE-60 flash attachment at all... any help in case?
or is it the ENM?
thanks!
|
kopritis
Joined: Mar 11, 2007
Posts: 295
From: Loutsa-Greece
PM |
On 2007-04-07 05:56:40, onthespot64 wrote:
To all modders. I'd like to help out a bit concerning taking pictures with the led on. Its either the pictures come out too cold (blueish) or warm (yellow/redish).
The solution to this problem is rather simple and you dont need to edit the colors settings.
All you have to do is this.
In this line:
LED_WB_SET= 06 02 00 01 05 11 #CMD_END
Replace the 05 with this (02):
LED_WB_SET= 06 02 00 01 02 11 #CMD_END
Thats the only thing you need to edit! Why 02? Because when you use the Led its light is similar to fluorescent.
I do this to every single cam driver that I download (Zuza 1, 7,7FL/Etd, 0.9, 6.9,8.53 etc....) and it has done me well, solving the cold or warm pictures. Try it, give it a shot! No need to fix/edit the color settings and give yourself a headache. WB is everything to a good picture....... well getting the right colors that is. =D
GOOD LUCK! =D
[ This Message was edited by: onthespot64 on 2007-04-07 05:06 ]
Thanks Man!!!! |
Kriomag
Joined: Dec 20, 2006
Posts: > 500
From: Poland
PM, WWW
|
On 2007-04-07 08:43:07, marcpogs wrote:
@kriomag
great camdriver amigo! but just one question, i dont think it supports my MXE-60 flash attachment at all... any help in case?
or is it the ENM?
thanks!
sorry, i dont have mxe-60 to test with it :/ |
|
|
Posted: 2007-04-06 23:23
