| Author |
Super camera driver for k750/w800/w810 |
Raiderski
Joined: Jul 03, 2006
Posts: > 500
From: Poland, Hell, Mountains
PM, WWW
|
anyone successfully loaded patch "move_drivers_to_other" into W800 with R1BD001 firmware? |
|
|
kopritis
Joined: Mar 11, 2007
Posts: 295
From: Loutsa-Greece
PM |
On 2007-04-04 10:36:28, Raiderski wrote:
anyone successfully loaded patch "move_drivers_to_other" into W800 with R1BD001 firmware?
first of all before you flash the main firm with the patch you have to go to the others in your phone memory to make a folder "drv" and you put inside camdriver0.dat and dispdriver0.dat.
After that you can do the flash with your patch and the phone work normally and you don't see the white screen
I think we are off topic a little bit!!!  @Raiderski
Hope i help you! 
[ This Message was edited by: kopritis on 2007-04-04 10:30 ]
[ This Message was edited by: kopritis on 2007-04-04 10:31 ] |
elevation1
Joined: Mar 07, 2007
Posts: 31
PM |
@kopritis and @Kriomag
can you make a driver based on daylight kopritis and nightmode kriomag... beacause in the night mode i have many problems with ENM by kopritis and also with led... is it possible? are you agree? thanks anyway and thanks for your work  |
guguly
Joined: Jan 12, 2007
Posts: 120
PM |
On 2007-04-04 07:00:13, sarmadgilani wrote:
v4.6 .... My 4.5 mod .. now with AE Lock
- White balance correction, higher video FPS
- ENHANCED nightmode from Chengrong's v8.54 (only on with Macro+night mode)
- LED ENM support and 3 Video Recording modes (normal, night, ENM)
- Original 4x zoom
- Pilya's color correction
- AE lock from Chengrong
Link: http://www.mediafire.com/?8wgz2i5wykz
since some folks wanted it, I added the AE lock.. i left out the spot since just changing EV can accomplish that.. and i didnt like the 16x zoom since its so slow.. so i put back the original Zoom.. tested and works great on my w810 R4EA031
thanks for this. i like that you based your driver on the 4.5.i'll try it out with my w810i. |
kopritis
Joined: Mar 11, 2007
Posts: 295
From: Loutsa-Greece
PM |
On 2007-04-04 11:57:36, elevation1 wrote:
@kopritis and @Kriomag
can you make a driver based on daylight kopritis and nightmode kriomag... beacause in the night mode i have many problems with ENM by kopritis and also with led... is it possible? are you agree? thanks anyway and thanks for your work
I agree but at nightmode the expert i think is Kriomag... |
norbi_nw
Joined: Nov 27, 2006
Posts: > 500
From: Romania, Timisoara
PM |
This latest driver by Krio is great. Good thing someone noticed we don't need smooth linear zoom when taking pix. But at VR the zoom could be a little faster. Great work man (and last but not least thx for chengrong for the ENM+/- LED technology) |
paparazy
Joined: Dec 04, 2006
Posts: 239
PM |
Patch PaParazy v1.50 Tunned Photo,Video,Sound,Display,Unlocking,Custom for mobile SE k750/w800/w810
New: Driver Cam //April 02,2007 by PaParazy (-) contrast, (+) AE, fix Led colors, fix profile scences, (-) enhanced night
Sound Max Tunned Full Work!
http://www.esato.com/board/viewtopic.php?topic=141735 |
Raiderski
Joined: Jul 03, 2006
Posts: > 500
From: Poland, Hell, Mountains
PM, WWW
|
what about quantization tables (luminance, chrominance) and factors? anyone tryed to change values? all i can see they are different from Annex of the JPEG standard - in my opinion SE dudes trying to save more low-freq informations (that's good).
i can see also bad thing: values are good for 70% compression level or am i wrong? shouldn't we push them up for higher compression if we declare compression at 90-93% in most drivers?
well i've checked one of my image taken with zuza2007... declared compression in driver = 90% but approx quality factor = 75%
[ This Message was edited by: Raiderski on 2007-04-04 21:53 ] |
pakraider
Joined: Jul 25, 2003
Posts: 313
PM |
On 2007-04-04 12:31:53, guguly wrote:
thanks for this. i like that you based your driver on the 4.5.i'll try it out with my w810i.
yeah, for some reason i get very blurry and noisy shots with anything other than 4.5 . i have no idea why.. i love those shots that people post with 7.7, zuza, 9.0, etc.. but those drivers are horrible for my phone  wonder whats the problem, but 4.5 seems to work ok... |
guguly
Joined: Jan 12, 2007
Posts: 120
PM |
On 2007-04-05 01:13:22, sarmadgilani wrote:
On 2007-04-04 12:31:53, guguly wrote:
thanks for this. i like that you based your driver on the 4.5.i'll try it out with my w810i.
yeah, for some reason i get very blurry and noisy shots with anything other than 4.5 . i have no idea why.. i love those shots that people post with 7.7, zuza, 9.0, etc.. but those drivers are horrible for my phone wonder whats the problem, but 4.5 seems to work ok...
i noticed the same thing for my phone for most other drivers except 6.9 and 4.5. i started testing your driver. i noticed that like kriomag's 4.5 based driver, the burst mode shot does not work. i mean, it takes shots but does not save. after taking the shots, it exits the camera mode. can this be fixed or is it a bug of the ENM? |
pakraider
Joined: Jul 25, 2003
Posts: 313
PM |
On 2007-04-05 03:22:14, guguly wrote:
i noticed the same thing for my phone for most other drivers except 6.9 and 4.5. i started testing your driver. i noticed that like kriomag's 4.5 based driver, the burst mode shot does not work. i mean, it takes shots but does not save. after taking the shots, it exits the camera mode. can this be fixed or is it a bug of the ENM?
hmm.. youre right... i'll look into it and see if i can fix the problem.. |
mikeypants
Joined: Mar 24, 2007
Posts: 26
PM |
I NEED HELP, PLEASE
I have a W810i that has the following specs:
Detected SonyEricsson: K750/D750/W800/W810/W550/Z520/Z530.
Status Ok, OTP Close, CID49, PAF1
IMEI: XXXXXX-XX-XXXXXX
Phone Color: Red
Phone CID: 49
Operator:Generic Trade
Language:AMERICA_1
CDA Number:CDA102555/15
Firmware Version:R4ED001
Phone Model (1):Mike
Phone Model (2):W810i
I cannot get FAR Manager to work with my W810i. Through FAR I go into SEFP 0.10.0.51 then select DCU-60, 921600, and w300_w810_z550 (after this I cannot read what it says, but it has w810 in it...) I have RTS and DTR clicked.
After I enter the matrix, FAR manager tells me that a k750/w800 phone is detected and then nothing else happens. Do I try the SEFP setting with a CID49 K750 and install the camera driver there in the same method as for my k750?
[ This Message was edited by: mikeypants on 2007-04-05 06:14 ] |
chengrong
Joined: Sep 01, 2006
Posts: 81
PM |
On 2007-04-04 21:56:45, Raiderski wrote:
what about quantization tables (luminance, chrominance) and factors? anyone tryed to change values? all i can see they are different from Annex of the JPEG standard - in my opinion SE dudes trying to save more low-freq informations (that's good).
i can see also bad thing: values are good for 70% compression level or am i wrong? shouldn't we push them up for higher compression if we declare compression at 90-93% in most drivers?
well i've checked one of my image taken with zuza2007... declared compression in driver = 90% but approx quality factor = 75%
[ This Message was edited by: Raiderski on 2007-04-04 21:53 ]
I have changed the quantization table, but it is no effect, I think that the quantization table is used for burst mode.
http://chengrongblog.blogspot.com/
|
MiHaU
Joined: Feb 06, 2007
Posts: 145
From: Poland
PM |
@Kriomag
Great job dude! But I was wondering if you could replace zoom with manual focus. In my k750i@w800i R1BC002 CID49 zoom doesn't work on high res and it's useless for me.. ;/ So if you're bored and you have too much time to waste, make it better, please. |
guguly
Joined: Jan 12, 2007
Posts: 120
PM |
On 2007-04-05 07:03:43, mikeypants wrote:
I NEED HELP, PLEASE
I have a W810i that has the following specs:
Detected SonyEricsson: K750/D750/W800/W810/W550/Z520/Z530.
Status Ok, OTP Close, CID49, PAF1
IMEI: XXXXXX-XX-XXXXXX
Phone Color: Red
Phone CID: 49
Operator:Generic Trade
Language:AMERICA_1
CDA Number:CDA102555/15
Firmware Version:R4ED001
Phone Model (1):Mike
Phone Model (2):W810i
I cannot get FAR Manager to work with my W810i. Through FAR I go into SEFP 0.10.0.51 then select DCU-60, 921600, and w300_w810_z550 (after this I cannot read what it says, but it has w810 in it...) I have RTS and DTR clicked.
After I enter the matrix, FAR manager tells me that a k750/w800 phone is detected and then nothing else happens. Do I try the SEFP setting with a CID49 K750 and install the camera driver there in the same method as for my k750?
you're in the wrong thread to ask this but i'll try to help you out and point you in the right direction.
this may seem like a basic procedure but I still need to ask, have you installed the "dummy" main using XS++ before using FAR+SEFP? You can not break-in your phone FS using Far without this "dummy" Main file.
if you have done the above and still fail to access FS, follow this link for tutorial and support: http://forums.se-nse.net/index.php?showtopic=7330&st=0
[ This Message was edited by: guguly on 2007-04-05 06:59 ] |
|
|
Posted: 2007-04-04 10:36
