| Author |
Super camera driver for k750/w800/w810 |
P_Cherry
Joined: Mar 28, 2007
Posts: 36
PM, WWW
|
Stupid question, yesterday I tested 8.54 version in a dark room, I did one snapshots with every profile, but all have shutter speed 1/20 and different ISOs...
How can I set for example ISO 100 and shutter 2sec ? |
|
|
stingjoel
Joined: Jan 24, 2005
Posts: 265
From: Indonesia
PM |
On 2007-03-30 09:24:17, P_Cherry wrote:
Stupid question, yesterday I tested 8.54 version in a dark room, I did one snapshots with every profile, but all have shutter speed 1/20 and different ISOs...
How can I set for example ISO 100 and shutter 2sec ?
These pictures are ISO 100, but the shutter speed is 1/6 sec 
Taken with Nightscene + night mode on.
K750i CID36 R1CA021 APAC. |
kopritis
Joined: Mar 11, 2007
Posts: 295
From: Loutsa-Greece
PM |
for all to have this problem with k750 cid 49red R1DB001
"If I close the camera with the macro mode on.
I cannot use any more the camera:
For 1 second I've the screen of the camera and I can see the macro is still enable.
And after that my phone goes back to the last screen..."
this problem with the camera i have it but i solved.
k750 cid 49red R1DB001 -> if you want to solve this problem open the camdriver0.dat with a hex editor and replace that:
cam_vf_sync=5;
cam_ss_sync=5;
cam_ss_sync_9=7;
cam_ss_retries=7;
in to that:
cam_vf_sync=5;
cam_ss_sync=f;
cam_ss_sync_9=7;
cam_ss_retries=9;
"Sorry about my english  "
[ This Message was edited by: kopritis on 2007-03-30 09:21 ] |
kopritis
Joined: Mar 11, 2007
Posts: 295
From: Loutsa-Greece
PM |
a few pics of my camdriver with k750i CID49 RED R1DB001
[ This Message was edited by: kopritis on 2007-03-30 09:38 ] |
norbi_nw
Joined: Nov 27, 2006
Posts: > 500
From: Romania, Timisoara
PM |
Using this 8.84 CID36 driver... I noticed, that sometimes it isn't saveing the picture (tryed to take a pic of a document) Second time, it was Ok.
1 QUESTION: whenever a camera crashes, does it crash because the high compression (in this case ~87%) ? |
kopritis
Joined: Mar 11, 2007
Posts: 295
From: Loutsa-Greece
PM |
On 2007-03-30 12:01:52, norbi_nw wrote:
Using this 8.84 CID36 driver... I noticed, that sometimes it isn't saveing the picture (tryed to take a pic of a document) Second time, it was Ok.
1 QUESTION: whenever a camera crashes, does it crash because the high compression (in this case ~87%) ?
Sometimes yes because the drivers contains errors... in my case the compression is 96% and my camera didn't crash with nightmode and ev -2.0...
take an example:
when the compression is ~96% and the line in camdriver0.dat is:
""$c0 08 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(02,30) #SET_JPEG_AVG(01,e0) #SET_JPEG_QUALITY"" the camera crashes...
the correct is:
""$c0 08 #SET_JPEG_MIN(01,90) #SET_JPEG_MAX(02,58) #SET_JPEG_AVG(01,F4) #SET_JPEG_QUALITY"" and the camera works fine!
I hope to help you!!
[ This Message was edited by: kopritis on 2007-03-30 12:10 ] |
stingjoel
Joined: Jan 24, 2005
Posts: 265
From: Indonesia
PM |
@kopritis;
What's your camdriver? will you share with us?
K750i CID36 R1CA021 APAC. |
dennis.l
Joined: Oct 05, 2006
Posts: 96
PM |
I notice that with the 7.7 final driver With ENM. too..
this is usually when I take a photo that has a lot of small details. eg, if I take a picture of a tree with lots of small leaves. It has not done that to me with the Stock or the Zuza drivers though. |
kopritis
Joined: Mar 11, 2007
Posts: 295
From: Loutsa-Greece
PM |
my camdriver is the original 5.3 but i've make some changes at sharppenes, compression and the file size. at the day ligh the driver gives very sharp images iso-100 ~589KB in the fine mode... I'ill give my driver at the forum in few days... because i have not make a full test...
at the moment, the driver seems to be good at k750i cid 49red r1db001...
[ This Message was edited by: kopritis on 2007-03-30 12:37 ] |
P_Cherry
Joined: Mar 28, 2007
Posts: 36
PM, WWW
|
Yeah, with Night profile with Night mode ON, you have 0.6s, but what about for example 2s ? is it possible to set up ?
Does anybody know, what is best ratio between ISO and shutter speed ? I would like to find this combination in case of bad light conditions with moving objects...better to have a little noise than blurred pictures...
[ This Message was edited by: P_Cherry on 2007-03-30 12:50 ] |
kopritis
Joined: Mar 11, 2007
Posts: 295
From: Loutsa-Greece
PM |
at totaly darkness...
with nightmod on, Led off, Exposure Time 1/20sec, iso-200, ev0.0, 580KB in the fine mod 1632x1224
with nightmod on , led on, Exposure Time 1/10sec, iso-200, ev-1.0, 572KB in the fine mod 1632x1224
with nightmod off , led off, macro on, Exposure Time 1/20sec, iso-200, ev0.0, 608KB in the fine mod 1632x1224
[ This Message was edited by: kopritis on 2007-03-30 13:16 ] |
P_Cherry
Joined: Mar 28, 2007
Posts: 36
PM, WWW
|
To kopritis: Wow great pictures !!! what is your driver ? 8.54 ? oh...I see ...you wrote slightly modified version 5.3 it seems to me very good...
what about bad lighting conditions with moving objects....concerts etc...Have you tried it yet ?
How many days will we have to wait for your final version I will be satisfied with current for testing also.....
Thanx
Peter
[ This Message was edited by: P_Cherry on 2007-03-30 14:00 ]
[ This Message was edited by: P_Cherry on 2007-03-30 14:19 ] |
elevation1
Joined: Mar 07, 2007
Posts: 31
PM |
kopritis wonderful photos... so your driver is 5.3 original sony and then modded? please can you share with us? i have k750iw800i cid 49... another question but more compression=more quality photo? if yes is very good for me... i don't have problem beacause i have a 2gb memory stick sorry for my english and thanks a lot |
ady_k4e
Joined: Jun 11, 2006
Posts: 70
PM |
bitrate cant be changed by the driver, there is no such option in it, only bitrate or JPEG quality...
You can influence bitrate with a few options...
06 02 00 01 28 03 #CMD_END
06 02 00 01 01 34 #CMD_END
You will say that this is the option for framerate.You are right. But with the right combo you can increase the bitrate. Bigger bitrate=> more detail. If u use 06 02 00 01 40 03 #CMD_END you will force a bigger framerate but with a cost of smaller bitrate thus smaller detail. |
Kriomag
Joined: Dec 20, 2006
Posts: > 500
From: Poland
PM, WWW
|
On 2007-03-30 15:39:40, ady_k4e wrote:
bitrate cant be changed by the driver, there is no such option in it, only bitrate or JPEG quality...
You can influence bitrate with a few options...
06 02 00 01 28 03 #CMD_END
06 02 00 01 01 34 #CMD_END
You will say that this is the option for framerate.You are right. But with the right combo you can increase the bitrate. Bigger bitrate=> more detail. If u use 06 02 00 01 40 03 #CMD_END you will force a bigger framerate but with a cost of smaller bitrate thus smaller detail.
in my opinion bitrate is solid (+/- few%), files are larger or smaller because of framerate (if you record video with 10fps when one frame has 5kB it will be smaller than video recorded with 14 fps when each frame has 5kB). bitrate is set to each frame if im wrong someone plz correct me |
|
|
Posted: 2007-03-30 09:24
