| Author |
SONY Xperia Rumors 2013 Edition |
maiaramdan
Joined: Dec 13, 2012
Posts: 308
From: Kazan living in Sumy
PM |
On 2013-06-16 22:39:26, sami92a wrote:
It seems that the Honami aka Z2 will be so much like the ZL from the front with the low bezel with some NXT touchs just as I said in January
Carbon-fiber in corners and side with internal metal panels and back large camera at the middle with metal under the remain of the camera and carbon fiber from the top, another thing the front camera will be at the top not as the ZL
i´m trying to make a picture of it in my head, will the metal be under the lens where the battery goes and everything and Carbon fibre over the lens on the top part of the phone?
Imagine a big circle in the middle that takes approximately all width all the top of this circle is carbon fiber finish as the sports car and all the bottom in metal
At the bottom imagine the shape of the small Mic on the Z but it is tall and around this a tiny NXT line and same from the top |
|
|
MNX1024
Joined: Jul 08, 2009
Posts: 413
PM |
On 2013-06-16 22:45:58, maiaramdan wrote:
Imagine a big circle in the middle that takes approximately all width all the top of this circle is carbon fiber finish as the sports car and all the bottom in metal
At the bottom imagine the shape of the small Mic on the Z but it is tall and around this a tiny NXT line and same from the top
May you just give us a crude drawing.  |
sami92a
Joined: Dec 11, 2012
Posts: 423
From: Sweden
PM |
On 2013-06-16 22:45:58, maiaramdan wrote:
On 2013-06-16 22:39:26, sami92a wrote:
It seems that the Honami aka Z2 will be so much like the ZL from the front with the low bezel with some NXT touchs just as I said in January
Carbon-fiber in corners and side with internal metal panels and back large camera at the middle with metal under the remain of the camera and carbon fiber from the top, another thing the front camera will be at the top not as the ZL
i´m trying to make a picture of it in my head, will the metal be under the lens where the battery goes and everything and Carbon fibre over the lens on the top part of the phone?
Imagine a big circle in the middle that takes approximately all width all the top of this circle is carbon fiber finish as the sports car and all the bottom in metal
At the bottom imagine the shape of the small Mic on the Z but it is tall and around this a tiny NXT line and same from the top
hmm i THINK i get it now.. but can you as MNX mentioned maybe give us an drawing to make us understand a little better  |
goldenface
Joined: Dec 17, 2003
Posts: > 500
From: Liverpool City Centre
PM |
I've got some sort of idea. I'm liking what I hear.
|
Ambivalent_
Joined: Oct 15, 2012
Posts: > 500
From: Croatia, Zagreb
PM |
Maia, how are you at MS Paint?  |
maiaramdan
Joined: Dec 13, 2012
Posts: 308
From: Kazan living in Sumy
PM |
On 2013-06-16 22:52:58, MNX1024 wrote:
On 2013-06-16 22:45:58, maiaramdan wrote:
Imagine a big circle in the middle that takes approximately all width all the top of this circle is carbon fiber finish as the sports car and all the bottom in metal
At the bottom imagine the shape of the small Mic on the Z but it is tall and around this a tiny NXT line and same from the top
May you just give us a crude drawing.
I did a sample fast sketch but don't know how to upload it
|
sami92a
Joined: Dec 11, 2012
Posts: 423
From: Sweden
PM |
On 2013-06-16 23:19:45, maiaramdan wrote:
On 2013-06-16 22:52:58, MNX1024 wrote:
On 2013-06-16 22:45:58, maiaramdan wrote:
Imagine a big circle in the middle that takes approximately all width all the top of this circle is carbon fiber finish as the sports car and all the bottom in metal
At the bottom imagine the shape of the small Mic on the Z but it is tall and around this a tiny NXT line and same from the top
May you just give us a crude drawing.
I did a sample fast sketch but don't know how to upload it
upload it here http://www.imagebam.com then qoute this post, go into full editor then you click the picture with a chain on it above ^ and post paste the link in between [img][/img] < these two
[ This Message was edited by: sami92a on 2013-06-16 22:23 ] |
Ambivalent_
Joined: Oct 15, 2012
Posts: > 500
From: Croatia, Zagreb
PM |
On 2013-06-16 23:19:45, maiaramdan wrote:
On 2013-06-16 22:52:58, MNX1024 wrote:
On 2013-06-16 22:45:58, maiaramdan wrote:
Imagine a big circle in the middle that takes approximately all width all the top of this circle is carbon fiber finish as the sports car and all the bottom in metal
At the bottom imagine the shape of the small Mic on the Z but it is tall and around this a tiny NXT line and same from the top
May you just give us a crude drawing.
I did a sample fast sketch but don't know how to upload it
Try this;
http://imageshack.us/ |
maiaramdan
Joined: Dec 13, 2012
Posts: 308
From: Kazan living in Sumy
PM |
I sent it to golden face and he will uploads it |
goldenface
Joined: Dec 17, 2003
Posts: > 500
From: Liverpool City Centre
PM |
Here is the sketch, which I have uploaded on his behalf.
|
sami92a
Joined: Dec 11, 2012
Posts: 423
From: Sweden
PM |
On 2013-06-16 23:29:40, goldenface wrote:
Here is the sketch, which I have uploaded on his behalf.
ahhhhh nice !!! its as i had it in my mind! BUT imo the camera area seems a little to big to be honest!!!
[ This Message was edited by: sami92a on 2013-06-16 22:34 ] |
goldenface
Joined: Dec 17, 2003
Posts: > 500
From: Liverpool City Centre
PM |
It looks wicked, even from that sketch 
|
Ambivalent_
Joined: Oct 15, 2012
Posts: > 500
From: Croatia, Zagreb
PM |
Great job!
That camera looks huge! Larger than EOS!
@Maia; is there a hump on the back or is it flat? |
maiaramdan
Joined: Dec 13, 2012
Posts: 308
From: Kazan living in Sumy
PM |
It is all flat
I think the weight is between 180 to 200 grams
The camera area contain a deep spaces as the professional camera which makes me question myself if the camera will be able to be used alone or this is just the sensor and everyone should put the lenses before shot |
sami92a
Joined: Dec 11, 2012
Posts: 423
From: Sweden
PM |
Maia what means with NXT on the pic? whats there? Notification lights? |
|
|
Posted: 2013-06-16 22:45
