Posted by tl24
So when will you release the drivers?
Posted by ta_power
On 2008-12-03 22:16:13, tl24 wrote:
So when will you release the drivers?
some time next week
Posted by frankthetank
Do we need to create the com_event#22 for forced flash?
I ask because I cannot find it within the driver
Thanks
Posted by ta_power
On 2008-12-05 23:09:50, frankthetank wrote:
Do we need to create the com_event#22 for forced flash?
I ask because I cannot find it within the driver
Thanks
it wasn't in the original driver but it is actuary part of the camdrive
so you just have to put it in the right place that all
you don't need to create any thing just put COM_EVENT(22,01) in the cam drive
sorry for my english
Posted by frankthetank
Your english is fine!
Where is the right place for it to be then? ie which property number?
Posted by ceaser2008
i like this cam drive...but stilll confused how to install it to my k850....which softwares i need to install....if possible pls let me know step by step procedure of installing the cam drive
Posted by kenjibatusai
On 2008-12-08 09:17:41, ceaser2008 wrote:
i like this cam drive...but stilll confused how to install it to my k850....which softwares i need to install....if possible pls let me know step by step procedure of installing the cam drive
Go here
http://www.esato.com/board/viewtopic.php?topic=177034
Posted by Mattegtr
will the drive work for C702??
Posted by ta_power
On 2008-12-08 16:35:37, Mattegtr wrote:
will the drive work for C702??
I haven't try that. but I don't think it will work on C702
Posted by Raiderski
for sure it won't
Posted by fatalerror27
mr. ta_power where's your camdrive? we are very eager to test it. hope u could finish it soon and share it with us. gudluck and congrats in advance! ^_^
Posted by ceaser2008
hello ta_power,
i m from india..i have installed your camdrive in my k850i...the results are awsome...thank you for your great work...but still there are few changes to be make..hope you catch that in your upcoming version of cam drive 4 beta...
may be others have told these to you or not but i thought i should draw your attention on these so that you can make next version very effectively..
1. camera is working fine in Auto mode but in other modes like twillight landscape/portrait, landscape, portrait, snow/beach--- when we switch to these modes the camera screen is clear but after taking the first snap, the camera screen becomes more like blurr or more noise on the screen, though, when we take snap, the image is perfectly clear and no visible noise or blurrness observed. These problem get even worse in sport and document modes. when we switch these modes, the mobile screen has much more noise or dots playing around the screen before taking the snap. here as well the pic taken is clear and good.
2.in Document, the pics get washed out. (all white)
3. there is some problem with camera's focusing strenght even in the auto+spot mode. you can not focus on the same object consecutively.
these are few problem which i encounted with your cam drive. but i like your drive and your work. i m really looking forward to have your latest version of 4 beta with above mentioned modifications.
thank you for your 3 beta and in advance thank you for your 4 beta.
Posted by ta_power
On 2008-12-09 14:50:24, Raiderski wrote:
for sure it won't
Ok as Raiderski it won't work for sure
Thank Raiderski
On 2008-12-11 00:27:33, fatalerror27 wrote:
mr. ta_power where's your camdrive? we are very eager to test it. hope u could finish it soon and share it with us. gudluck and congrats in advance! ^_^
Thank you
Ok I'll upload it some time this week.
On 2008-12-11 14:55:24, ceaser2008 wrote:
hello ta_power,
i m from india..i have installed your camdrive in my k850i...the results are awsome...thank you for your great work...but still there are few changes to be make..hope you catch that in your upcoming version of cam drive 4 beta...
may be others have told these to you or not but i thought i should draw your attention on these so that you can make next version very effectively..
1. camera is working fine in Auto mode but in other modes like twillight landscape/portrait, landscape, portrait, snow/beach--- when we switch to these modes the camera screen is clear but after taking the first snap, the camera screen becomes more like blurr or more noise on the screen, though, when we take snap, the image is perfectly clear and no visible noise or blurrness observed. These problem get even worse in sport and document modes. when we switch these modes, the mobile screen has much more noise or dots playing around the screen before taking the snap. here as well the pic taken is clear and good.
2.in Document, the pics get washed out. (all white)
3. there is some problem with camera's focusing strenght even in the auto+spot mode. you can not focus on the same object consecutively.
these are few problem which i encounted with your cam drive. but i like your drive and your work. i m really looking forward to have your latest version of 4 beta with above mentioned modifications.
thank you for your 3 beta and in advance thank you for your 4 beta.
Ok I'll try to fix that in Beta 4 then
thank you for your comment
I always wanted this kind of comment hope to see more comment like this one many many thank to ceaser2008
Posted by kenjibatusai
I've installed this great camdriver but sometimes a message of other application running in the background (which is false) pops up; and then the camera turns off.
Has anyone experienced this?
_________________
K850i + HPM-70 + HBH-DS220 + M2 1GB [ This Message was edited by: kenjibatusai on 2008-12-12 15:19 ]
Posted by larry 68
@kenjibatusai
I've started to get that too but I'm using the strong 1.0 cam.
Posted by sowbran
hey i have a quest
when i take a picture with flash the first is black and the second is good is problem of the firmware or what it's??
thanks greetings
Posted by se.kuttan
hi ta_power:
I have been using ur driver for some time. The results are great. I love this driver.
It would have been even greater if the driver had forced flash. Can u please make a version where red eye reduction option uses forced flash, like in Raiderski k800 camdriver?
Or can u please post here the code for forcing the flash on?
Keep up the good work. thanks in advance
Posted by ta_power
On 2008-12-12 15:56:48, kenjibatusai wrote:
I've installed this great camdriver but sometimes a message of other application running in the background (which is false) pops up; and then the camera turns off.
Has anyone experienced this?
_________________
K850i + HPM-70 + HBH-DS220 + M2 1GB
[ This Message was edited by: kenjibatusai on 2008-12-12 15:19 ]
Ok sorry for late reply
that's one bug I know of. I also get this bug on original camdrive 3.7 as well but only some time
no Jupita Beta 3 this bug will happen when you take a lot of photo at one time.
if you get this bug just exit camera and turn it back on that all
but any way i'll try fix this bug on Beta4. B'cos i got this bug on my Beta 4 too
thank you for bug report
On 2008-12-12 16:21:24, larry 68 wrote:
@kenjibatusai
I've started to get that too but I'm using the strong 1.0 cam.
On 2008-12-12 18:04:51, sowbran wrote:
hey i have a quest
when i take a picture with flash the first is black and the second is good is problem of the firmware or what it's??
thanks greetings
some time my phone did that too but randomly
thank for bug report
On 2008-12-13 05:40:45, se.kuttan wrote:
hi ta_power:
I have been using ur driver for some time. The results are great. I love this driver.
It would have been even greater if the driver had forced flash. Can u please make a version where red eye reduction option uses forced flash, like in Raiderski k800 camdriver?
Or can u please post here the code for forcing the flash on?
Keep up the good work. thanks in advance
first of all Thank You for try out my camdrive
and about Forced Flash it will be in Beta 4 for sure
Ho! and by the way I will change the name of Beta 4 to Final version and it will be my last camdrive!!
Thank You all
Posted by ceaser2008
Hello ta_power
Hope your work of making 4 beta is going well. We are expecting the best drive from you. When will you release that? I cant wait to try it.
Why this drive would be final version? I think you can still go further.
Posted by jason_lam85
hi there ta_power,
i'm currently loving your camdriver ^^
pictures taken by my k850i now is really good~
i'm dying to ask this, but is there a possibility that we'll get manual focus function with the k850i?
Posted by jaskooo
Well i'm tested it. My K850 has latest firmware. Pictures are not so good.
They are not so sharp, and they are very bad in low light conditions (room lights). And picture modes are bad also. Best pic i have is on automatic mode. EG, the document mode is the worst, even for the documents. I reverse to my original cam driver, or Strong 1.1
Posted by ta_power
On 2008-12-16 00:17:17, jaskooo wrote:
Well i'm tested it. My K850 has latest firmware. Pictures are not so good.
They are not so sharp, and they are very bad in low light conditions (room lights). And picture modes are bad also. Best pic i have is on automatic mode. EG, the document mode is the worst, even for the documents. I reverse to my original cam driver, or Strong 1.1
thank for trying it out
and thank for bug report
Posted by jaskooo
no problemo:-) No hard feelings, i appriciate your work. i'm totaly n00b about driver modd, but i can test it:-). K850 got worst camera then k800, totaly waste of money:-). I'm gonna sell it and get maybe Samsung G800 or something like that:-). Cheers
Posted by ta_power
Link For Jupita Final for K850i >>>>>>>>>>Jupita Final
There is still some bug. ijust don't have time to fix it yet
I'll fix it as soon as i have time thank
what's new in Final :
- Forced Flash
- Change Twilight Landscape and Twilight Portrait to Night Light mode and firework mode
- Change speed shutter in Twilight Landscape from 1/8s to1/2s-2s (can be adjust by +,- EV)
[ This Message was edited by: ta_power on 2008-12-21 04:03 ]
Posted by se.kuttan
@ta_power
what are the changes that u have made in the new version?
is there forced flash?
what r the known bugs?
[ This Message was edited by: se.kuttan on 2008-12-19 05:34 ]
Posted by whatsucka
ya... im really interested if u put da forced flash in dis driver...
Posted by TimeWriter
I'll try this and I'll post some pics with the new Jupita final's driver.
My k850 is charging at the moment and as soon as it's done, I'll apply this, can't wait...
Thank's Jupita for your great work, keep it in that way !
PS: Sorry for my bad english too.
[ This Message was edited by: TimeWriter on 2008-12-20 11:09 ]
Posted by nnr3
@ta power
could you upload the jupita final on other site?
I can't download it from 4shared.
Posted by TimeWriter
@nnr3
I have uploaded it for you on rapidshare, you can find it there. Cheers
Posted by nnr3
On 2008-12-20 12:28:36, TimeWriter wrote:
@nnr3
I have uploaded it for you on rapidshare, you can find it there. Cheers
Oh no! I can't also download it from rapidshare!
Can you just e-mail it to me. Here's my e-mail
ids_ivan@yahoo.com
Posted by se.kuttan
ta_power did not keep his word.
he did not implement forced flash as he promised. no improvement function-wise.
this driver is worse than the beta version. beta was just great, but this is crap....
Posted by strong
guys do you believe ta power is a real moder? his camdrive is a copy from my beta2 and lucass, some codes does not take affect I notice that before to him
sorry but this is a truth
Posted by jigonx
On 2008-12-20 12:44:39, se.kuttan wrote:
ta_power did not keep his word.
he did not implement forced flash as he promised. no improvement function-wise.
this driver is worse than the beta version. beta was just great, but this is crap....
you should not talk like this man..
ta_power has give us his contribution for K850 camdriver, like it or not
if you want forced flash, i have tried to enable forced flash on Jupita Final camdriver. you can try it, download --> here
On 2008-12-20 13:19:48, strong wrote:
guys do you believe ta power is a real moder? his camdrive is a copy from my beta2 and lucass, some codes does not take affect I notice that before to him
sorry but this is a truth
he copy it with permission, take a look at his camdriver. you can find your name in it
it is better if you help him to make a better camdriver..
Posted by strong
he copy it with permission, take a look at his camdriver. you can find your name in it
it is better if you help him to make a better camdriver..
nobody ask for permision the codes are free
but if I will use some codes from a modder I will report it at my change log thats the right
and second I noticed the ta power for the broblem at his camdriver some codes does not affect because I wanted to help him but the ta power release new driver with the same mistakes and I cant see any difference from his first driver
if ta power ask me help will be my pleasure to do that
sorry for my bad english
_________________
K850 R1FA035 modded camdriver Mollina's Mach5 Xplood III acoustic drivers
http://www.4shared.com/dir/6197354/5c0a18d1/sharing.html
www.camdrivers.wz.cz/
[ This Message was edited by: strong on 2008-12-20 20:08 ]
Posted by ta_power
On 2008-12-20 19:26:51, strong wrote:
he copy it with permission, take a look at his camdriver. you can find your name in it
it is better if you help him to make a better camdriver..
nobody ask for permision the codes are free
but if I will use some codes from a modder I will report it at my change log thats the right
and second I noticed the ta power for the broblem at his camdriver some codes does not affect because I wanted to help him but the ta power release new driver with the same mistakes and I cant see any difference from his first driver
if ta power ask me help will be my pleasure to do that
sorry for my bad english
_________________
K850 R1FA035 modded camdriver Mollina's Mach5 Xplood III acoustic drivers
http://www.4shared.com/dir/6197354/5c0a18d1/sharing.html
www.camdrivers.wz.cz/
[ This Message was edited by: strong on 2008-12-20 20:08 ]
I'll ask for your help for sure when i have time(witch i don't have right now)
and for the code i know it didn't work i just put it there for remind my self that all
thank for the offer
by the way i'm realy not a moder. i'm just nobody(my line of work is absolute not thing to do with computer or programing)
sorry for my english
[ This Message was edited by: ta_power on 2008-12-21 03:39 ]
Posted by fatalerror27
@ta_power
hey don't worry, it's alright even though you just copied other's code or even if you're not a "real" modder. the most important thing is that you tried and still trying to come up with a better k850i camdriver for all of us and contribute to our community. it's better compared to most of us who only waits for someone's work.
keep on modding man! i know u can come up with a good camdriver. u did it already, it only needs further enhancements and improvements. ^_^
Posted by brazzuka's
@ta_power
Donīt giveup and continue with your modifications... play with k850 ,you can use new techniques and make the most of camdriver k850.
All codes,registers and functions etc... are FREE of a sensor depend exclusively of developer or "modder" search them and make a good program.
The information and codes published in camdrivers are available to any modders and user but may not necessarily be copied, downloaded or reused without credit to the developers.
Try to use table color correction and color correction xenon flash you can have satisfactory results with those registers and functions
Use your imagination to get satisfactory results and use all the resources of the sensor k850.
Table color correction and color correction xenon flash for this models:
http://www.esato.com/board/viewtopic.php?topic=169423&start=105
good luck!
[ This Message was edited by: brazuka on 2009-01-04 12:56 ]
Posted by ziupo
IMHO Jupita Final is the best driver at my weather / lighting. And above all, with my requirements.
Please, do not abandon work on his driver!
Posted by Emmett
final driver is perfect!
Posted by whatsucka
where can i download da final driver?? is there any sample pictures for the final driver?? also is forced flash in the final driver??
Posted by Emmett
On 2009-01-09 19:08:45, whatsucka wrote:
where can i download da final driver?? is there any sample pictures for the final driver?? also is forced flash in the final driver??
Jupita final: http://www.4shared.com/file/76166952/c5306969/Jupita_Final.html
Posted by ta_power
On 2009-01-04 13:54:56, brazuka wrote:
@ta_power
Donīt giveup and continue with your modifications... play with k850 ,you can use new techniques and make the most of camdriver k850.
All codes,registers and functions etc... are FREE of a sensor depend exclusively of developer or "modder" search them and make a good program.
The information and codes published in camdrivers are available to any modders and user but may not necessarily be copied, downloaded or reused without credit to the developers.
Try to use table color correction and color correction xenon flash you can have satisfactory results with those registers and functions
Use your imagination to get satisfactory results and use all the resources of the sensor k850.
Table color correction and color correction xenon flash for this models:
http://www.esato.com/board/viewtopic.php?topic=169423&start=105
good luck!
[ This Message was edited by: brazuka on 2009-01-04 12:56 ]
Thank You brazuka i'll do it as soon as i have time
many many Thank brazuka
Posted by ta_power
Sample Pic Of Jupita Final as Request (Sorry I Forgot to rotate it before Upload)
** Click On Image To see Full Size (5MP) **
Full Size URL >> http://upload.bluegy.com/show[....]ebe5751cb79beb422b1e32bea6.JPG
Full Size URL >> http://upload.bluegy.com/show[....]d302350dc62dd09ab81725c75d.JPG
Full Size URL >> http://upload.bluegy.com/show[....]78900b85840cbcd5593c6f91eb.JPG
Full Size URL >> http://upload.bluegy.com/show[....]299fb555c46695098692bcf207.JPG
Full Size URL >> http://upload.bluegy.com/show[....]51cb00055aaa76b1cd17f66083.JPG
Full Size URL >> http://upload.bluegy.com/show[....]b64b22341528945ae48a1ed0fd.JPG
Full Size URL >> http://upload.bluegy.com/show[....]778dc732738646d361e4f330a1.JPG
Full Size URL >> http://upload.bluegy.com/show[....]b53a27867bf84f35dffc660c5b.JPG
Full Size URL >> http://upload.bluegy.com/show[....]d60744bdb59dabfb03f5705941.JPG
Full Size URL >> http://upload.bluegy.com/show[....]47905b4fda8fea26037490cdd6.JPG
_________________
[ This Message was edited by: ta_power on 2009-01-11 08:14 ]
[ This Message was edited by: ta_power on 2009-01-11 08:15 ]
Posted by tolyo
ta_power very good photos. we waiting camdriver!
Posted by whatsucka
o thanx!! btw how can i use forced flash?? any setting?? or i auto?
Posted by ta_power
On 2009-01-12 08:16:11, whatsucka wrote:
o thanx!! btw how can i use forced flash?? any setting?? or i auto?
you can used forced flash in auto mode as well as in twilight Portrait
Posted by ta_power
Hi all
Today I have a sample pic of EM Mode On Jupita X For K850i(new Version !!)
I'll Upload This Camdrive (Jupita X) after Chinese new year.
so this is sample pic of EM Mode (I'll Upload more pic as soon as i have time)
This Pic was taken with
- Twilight Landscape
- EV +1.0
(Set EV to 0.0 for Speedshutter 1/2s
Set EV to +1.0 for Speedshutter 1.0s. ,
Set EV to +2.0 for speedshutter 2.0s.)
-Speed Shutter 1.0 sec.
Click On The Link To See Full Size Image
http://upload.bluegy.com/show.php?7854bd13da81b6f53158a158d202af7d.JPG
_________________
[ This Message was edited by: ta_power on 2009-01-23 07:30 ]
[ This Message was edited by: ta_power on 2009-01-23 07:34 ]
Posted by ta_power
more sample pic
EM Test For K850i Jupita X
-Twilight Landscape
-EV 0.0
-Shutter Speed 1/2s.
EM Test For K850i Jupita X
-Twilight Landscape
-EV +2.0
-Shutter Speed 2s.
EM Test For K850i Jupita X
-Twilight Landscape
-EV +2.0
-Shutter Speed 1.33333s.
EM Test For K850i Jupita X
-Twilight Landscape
-EV +2.0
-Shutter Speed 2s.
Posted by rsdsgd
Ok, that demands a trial, so wait for my comments after that shootout.
Posted by rsdsgd
On 2009-01-23 10:38:32, rsdsgd wrote:
Ok, that demands a trial, so wait for my comments after that shootout.
Hmmmmmmm......Satisfied with the effort u made.
But I noticed two big issues.
1st is: When u capture pictures with the ISO 'Auto' mode, it is much more saturated the we need & gives a dark impact in colours. It gets fixed with the ISO 100-->200-->400 respectively.
2nd is: There is huge noiz in Document mode. plz MODDER give attention to these two things, overall it's a good "edited modding effort" & ok to me.
Keep climbing