Welcome to Esato.com




Hazel J20i Firmwares


Click to view updated thread with images




Posted by reeflotz
Updated my Hazel Firmware today. anyone who can find differences/changes in Hazel's firmwares please post them here.

Anyway I started from:

R7BA076:

Usually the first firmware installed on Hazel.

Bugs:

When switching from video mode to picture mode, the camera sometimes freezes. Need to restart the camera in order to work.

Light horizontal lines sometimes appear on lowlight pictures.


R7BA081:

Camera SW versions
Camera
Current: 3.8
Video Call camera
Current: 1.7

Java
JP-8.5.2

Changes:

Runs a little smoother than R7BA076

Bugs:

Same bug when switching from video mode to picture mode the camera sometimes freezes. Need to restart the camera in order to work.

Sometimes when shooting a video when you press stop the phone freezes (although it seldomly happens). Workaround is to press pause first then stop.

Light horizontal lines sometimes appear on lowlight pictures.


R7CA064:

LCD SW versions
Main display
Current 200911230

Camera SW versions
Camera
Current: 3.9
Video Call camera
Current: 1.8

ITP SW version
1227-6005 4

Content version
PA8

Java SW version
JP-8.5.2

Text revision:
BU

From SE site:

* Enhanced performance and stability.
* Improved ‘Noise Shield’ performance.

Changes:

Faster and smoother UI.

Has a new camera Icon.

Fixed the bug when switching from video mode to picture mode. The camera no longer freezes.

Settings>Calls> added noise shield and clear voice options


Bugs:

Light horizontal lines still sometimes appear on lowlight pictures.


R7CA065:

LCD SW versions
Main display
Current 200911230

Camera SW versions
Camera
Current: 3.9
Video Call camera
Current: 1.8

ITP SW version
1227-6005 4

Content version
PA8

Java SW version
JP-8.5.2

Text revision:
BU

Changes:

Improved signal reception.

Bugs:

Light horizontal lines still sometimes appear on lowlight pictures.

Note: for all firmwares

When widgets don't appear, reboot the phone after updating (you may have to remove and reinsert the battery), the widgets should be back after rebooting


Will edit my post if i find out some more improvements or bugs with the current firmware.

All updates were done using SEUS
[ This Message was edited by: reeflotz on 2010-10-12 10:50 ]



Posted by hkbbq458
Very nice to have your report. Keep the good work ......

Posted by reeflotz
thanks will try to keep the thread updated, just checked yesterday so far no new updates yet.

Posted by isiahma
Good Job Reeflotz!! Keep going...

thanks a lot!

Posted by MadOnion
Widgets dosen't seem to work on my Hazel. I tried the remove battery/reboot trick. I can manage widgets without problems, but the widgets I want to show on the standby-screen dosen't appear...

Posted by reeflotz
which widgets don't show? were they working before? what firmware do you have now?

Try updating the firmware using SEUS for a full firmware flash if you haven't tried yet, not sure but it might solve the problem.
[ This Message was edited by: reeflotz on 2010-10-07 11:44 ]


Posted by MadOnion
When I press the UP navigation I can choose to view the Calendar, Facebook, Twitter, Myspace or Walk Mate Eco widget on the home screen. It used to work with the old firmware, but now it dosen't.

I haven't tried a firmwareflash through my PC, only the one where the phone downloads the update over-the-air.
Will it help to flash through my PC? If I do a flash from my PC will the flash erase all my stored information? The update over-the-air did not erase any information and I must say I liked that

Posted by reeflotz
If you flash using PC and SEUS it will delete all files in your phone, you can use PC suite to backup your files but the applications that were installed on the phone will be lost, you'll have to reinstall them again Files on the memory card won't be affected though.

I haven't tried updating using the phone, I've always used PC and SEUS. If you have important apps and notes and you don't need the widgets I suggest don't update, but if you have a backup of all the apps, files on the phone on your PC and your contacts saved on SIM card I think it's worth a try using SEUS, you'll need the cable and the software update is around 100+mb.
[ This Message was edited by: reeflotz on 2010-09-23 06:29 ]


Posted by reeflotz
New firmware R7CA065 is out

Changes:

Signal reception seems to have been improved.


Bugs:

horizontal lines still sometimes appear on lowlight pictures.

Posted by tobbacum
To day I'm trying to update my R7CA064 Hazel using SEUS but it says that my phone already has the latest firmware, it seems that R7CA065 is not available yet for my location (Indonesia)...any suggestion?
[ This Message was edited by: tobbacum on 2010-10-11 09:02 ]


Posted by Run_dawn10

On 2010-10-07 12:43:15, reeflotz wrote:
New firmware R7CA065 is out

Changes:

Signal reception seems to have been improved.



Is it significantly improved? If it is, my prayers are answered.

Posted by Run_dawn10
Weird, my phone won't turn on after the update! Help.

Posted by reeflotz
try removing for at least 5 seconds then reinsert the battery, then turn on the phone, if it doesn't work try reinstalling the software using SEUS.

about the update, usually I get a constant 3-4 bars of signal at home in the previous firmware, after updating I get a constant 5 bars of signal at home, sometimes it drops to 4 but goes back to 5 bars, I think the signal improved, would like to get feedback from others and also from you after you get the Hazel running again hoping it gets fixed

EDIT: Glad you got Hazel working again, I guess we can confirm the update improved the signal
[ This Message was edited by: reeflotz on 2010-10-12 10:49 ]


Posted by Run_dawn10
I was glad it turned itself back on.

Guess I didn't charge the battery but It was well over 50% if I remember correctly.

Posted by bloodyvie
why indonesia dont have the latest update
mine still BA

Posted by tobbacum

On 2010-10-14 04:14:41, bloodyvie wrote:
why indonesia dont have the latest update
mine still BA

It has, 2 month ago i updated my hazel to be R7CA064. But last week when I'm trying to update to R7CA065 through SEUS, it said that my phone already has the latest firmware...it look like the R7CA065 isn't available for Indonesia...

Posted by bloodyvie

On 2010-10-15 06:30:57, tobbacum wrote:

It has, 2 month ago i updated my hazel to be R7CA064. But last week when I'm trying to update to R7CA065 through SEUS, it said that my phone already has the latest firmware...it look like the R7CA065 isn't available for Indonesia...



nope, i already checked using check software version and SEUS program
still saying i already hav the latest software yet
and my hazel still R7BA081 ..

Posted by geelast
whats is the latest firmware 4 j20i?? my hazel got no application Conservation on sms.,.

Posted by Wonderio619
Very useful thread. Thanks ))


Click to view updated thread with images


© Esato.com - From the Esato mobile phone discussion forum