| Author |
Help Need Plz K800i, Dead |
Rezk
Joined: Jul 10, 2008
Posts: 18
PM |
I know there's a lot of topics talking a bout this problem
and there's a solution too
Using XS++ or Wotan
The problem is I have K800i moded to K810 latest software
when i was connecting my phone to the usb to copy some Pics i've taking after that when i disconnected my Phone it stopped at a white screen and remained on that for a while and it didn't respond to any thing so i removed the battery and put it back again but the phone didn't power up
when i press the power button a red led just beeps from the infra
and nothing happens
The main problem here is when i got the solution to flash the EROM using XS++ or Wotan
I do all the steps I remove the battery and put back then press conect on
XS++ the i press 2+5 while connecting the cable nothing happens
no program can read the phone
also if i took it back the SE warranty they will not repair it if they discover that i moded it to K810
so what do i do?
Waiting for any help
[ This Message was edited by: Rezk on 2008-07-10 12:59 ] |
|
|
tranced
Joined: Jan 19, 2006
Posts: > 500
From: Santo Domingo, wonDeRland
PM |
On 2008-03-07 10:27:38, markmaslin wrote:
hi chaps
just thought i would let you know that i managed to get my phone working, it looks like it was the erom that was the problem, i tried to use the wotanserver tool but that didnt work so i used a tool from another website think it was called kulkendi, any ways here is the link to the information.
http://www.esato.com/board/viewtopic.php?topic=136077#post1833443
thanks again for all your help :0)
mark
use this
sory my englisch !
-first instal USBFlash Driver http://www.kulankendi.com/index2.php?pStrona=download
-in KK Client please option "EROM Update" and Login:kulan and Password:kulan
-now pres "Flasch"
...good luck
[ This Message was edited by: markmaslin on 2008-03-07 09:29 ]
taken from this thread
|
bishshoy007
Joined: Dec 11, 2007
Posts: 146
PM |
I had the same same problem and you know those fools at the the service did not detect it to be flashed/modded one. In 21 days I got a replacement coz they could not repair it.
LOL OL OL OL OL. |
Rezk
Joined: Jul 10, 2008
Posts: 18
PM |
Sry my internet connection was down for a while
an thank you tranced that was really very helpful
I tried the method of reversing the polarity of the battery with the Phone
Connecting +(Phone) to - (Battery) etc
after that the phone finally responded when i put the USB connection and configured as Generic USB Device
But when i used KK it give me a message (State 3)
with Setol it responded to the device but didnt mange to read it as K810
But stopped in the middle and Gave me SRC error
So, I gave up all hope and now i'am trying with SESC with the warranty i got
and will see where it's going to maybe they can fix it which I doubt
Thanks again and will give you the feedback when i receive the phone for the SC
[ This Message was edited by: Rezk on 2008-07-15 08:33 ] |
centur
Joined: Jun 10, 2007
Posts: > 500
From: Bulgaria
PM, WWW
|
On 2008-07-10 13:57:38, Rezk wrote:
I know there's a lot of topics talking a bout this problem
and there's a solution too
Using XS++ or Wotan
The problem is I have K800i moded to K810 latest software
when i was connecting my phone to the usb to copy some Pics i've taking after that when i disconnected my Phone it stopped at a white screen and remained on that for a while and it didn't respond to any thing so i removed the battery and put it back again but the phone didn't power up
when i press the power button a red led just beeps from the infra
and nothing happens
The main problem here is when i got the solution to flash the EROM using XS++ or Wotan
I do all the steps I remove the battery and put back then press conect on
XS++ the i press 2+5 while connecting the cable nothing happens
no program can read the phone
also if i took it back the SE warranty they will not repair it if they discover that i moded it to K810
so what do i do?
Waiting for any help
[ This Message was edited by: Rezk on 2008-07-10 12:59 ]
Must use setool2lite1.11.rar
1. Reinsert battery and do NOT turn on phone!
2. Start Setool and click Identify
3. Hold 2 and 5 together and in the meantime put the USB cable.
When hear that sound (though that connects USB flash memory) disconnect USB cable, reinsert battery and do NOT turn on phone!
4. Start XS++ v3.2 and click Connect.
5. Hold "C" button in the meantime put the USB cable.
6. Flash only Main (K800 _R8 BF003 _MAIN_GENERIC_WI_RED52), then again disconnect USB cable, reinsert battery and now can turn on phone - work fine as before.
Edit: Update link on Setool
[ This Message was edited by: centur on 2009-08-29 17:49 ] |
drWatkins
Joined: Jan 11, 2009
Posts: 3
PM |
I tried to 4shared for setool but:
The file link that you requested is not valid.
I HAVE A K810i phone, is it compatible with the procedure?
[ This Message was edited by: drWatkins on 2009-01-11 03:41 ] |
tranced
Joined: Jan 19, 2006
Posts: > 500
From: Santo Domingo, wonDeRland
PM |
the link works for me 
|
|
|
Posted: 2008-07-10 13:57
jay0726 | 
