Posted by Zwanzig
@c0mm0n
Thanks for a wonderful guide! It works just fine with my Epox BT-DG02 and t68i, exept one thing. Now I am not able to "print" my sms's to my computer. Got any tips?
@SEMIDEUS
When I synchrosized my t68i with Outlook for the first time it actually took me 10 minutes, so don't worry about your 5 minutes... Or do you mean 5 minutes of trying to find the phone?
If you believe you have any bluetooth programs or drivers, please remove them before you install the new ones.
Posted by antim
c0mm0n,
Thanks for howto on using pc as a headset to the cellphone. I wonder if you were actually able to hear the sound from the phone in your pc speakers. I was able to make the cellphone to connect to the headset profile on pc even without this complicated paring procedure. However,no matter with or without this procedure I cannot hear anything in my pc speakers (although the connection status on the pc headset profile reports it as 'good'). Do I have any hope?
Posted by cure
Where do you get hold of the firmware update for the MSI USB bluetooth dongle?
Posted by c0mm0n
@zwanzig
Zuerst, Guten tag
I tried this function, it connects to thc pc but just make a "PIM objects transfer" and then creates a mail that should be my incoming sms but the mail is blank...
I think the print function should work with bluetooth printers
With btprint/funsms on my pda, i exactly do what u're wishing
@antim
I know the method is kind of weird but i could successfully try it on a m8's computer yesterday ;
If you see a hbh connected to your phone in the accessory menu, your pairing might be good - if you get "impossible to connect" each time the phone tries to establish a connection with the pc, redo the pairing -
To test it launch a call, than the sound should come out of the speakers
Another thing i've noticed yesterday is that i've been able to pair both my pc and headset with the t68i and then found a way to easily change from one to the other
This will be included, in a global audio howto - i'll also test the fisio -
@cure
The latest msi drivers include a .dfu file
This file is firmware v373
Posted by Beltxo
Hey, interesting idea to post about Fisio phone!!!!!
I use it, and run a web about it (http://webcindario.com/espaciointerior), with lots of files to download.
Hope you post some "positive" things about it
Posted by antim
c0mm0n,
thanks, calls are sucessfully transfered from my T68i to pc but nothing comes out of the speakers. I wonder if it is something about my soundcard ( i have sony vx88 laptop).
Posted by c0mm0n
@belxto
I'll try to settle the same things i went trough with me t68i with my fisio 825..sounds harder actually, but the fisio can be a good boy
@ppl not having any sound from their pc
"Warning : I've been able to make it ork with my sony dongle and my msi requires at least a v373 firm to support audio ; some material issues may be encountered..hope our global feedback will help make that clear "
Posted by Beltxo
I have (at last!) my Conceptronic bud, with Anycom software and drivers (made my own modified inf).
Looking at its hardware registers, it seems to be an OEM version of ACER bud, but with 5 year warranty!!! (ACER provides only 2 years).
Have tested it with Fisio 835, everything OK. And MobilePhoneTools provided by Philips is a great tool for sync and any other thing you could imagine you can do with a Bluetooth enabled phone.
So I am HAPPYYYYYYYYYYYYYYYYYYYYYYYYYYY
Posted by alexgutteridge
Has anybody got the new drivers to work with the BlueTake Poke2 (BT009)? I install acbtusb and the anycom software fine, but when I plug the bud in and select the directory with the bluetake driver in XP says it's the wrong hardware.
In fact if I use the Anycom driver the bud works fine (even the headset) UNTIL I reboot my machine, at which point 'My Bluetooth places' says it can't find any local Bluetooth devices. Aaaaargh! I'm guessing this is a driver issue?
Is there a firmware update for the Poke2? I can't find anything on the Bluetake site.
Thanks for any advice (and thanks to c0mm0n for the drivers - when they work they work really well).
AlexG
Posted by ppcrockar
@ alexgutteridge
Bluetake has released the new drivers for the BT007 and the BT009. They are available from their website.
http://www.bluetake.com
or a direc tlink to the drivers
ftp://203.149.163.70/Bluetooth%20Software/BTW1.3.2.7/BTW1327.zip
I have the new drivers installed on my computer with the BT007 USB adapter.
[ This Message was edited by: ppcrockar on 2003-02-28 00:09 ]
Posted by alexgutteridge
Cheers! You're a lifesaver - I was going mad trying to fiddle around with the other drivers.
Posted by SEMIDEUS
One problem:
Everything works with pc and t68i (ie: sync., send files, pc control software, etc) but I can't send files from phone to pc... I could before and now it doesn't work any more. I already restarted the computer a few times....
Should I reinstall the bud? Anyone can help?
Thanks
Posted by antim
I am afraid broadcomm chipsets (i.e., belkin, d-link, tecom, pheenet, IOGear dongles) do not support audio profiles. Maybe a firmware upgrade could help, but so far none of the manufacturers has realsed any after version 1.2.2.16.
I am so frustrated. First I thought it's only the headset profile on my pc that is not functional. But today I've gort an HBH-120 handsfree and it turned out the audio gateway doesn't work either. In both cases the connection to the service appears fine but the sound does not flow to/from pc.
Maybe I should get another dongle. What chipsets do support the audio prifiles?
Thanks.
Posted by Skaff
Ref: What 'cure' said (above).
Where do you get hold of the firmware update for the MSI Bluetooth dongle?
c0mm0n says something about '373' but I'm on 2xx something?
Can't find it on the MSI website either.
Anybody help?
Posted by ppcrockar
What kind of range do you get with a bluetooth headset connected to your computer? I mean with accetable sound.
Posted by josh19
Hi!
Anyone know how i can get my t68i work with an
microsoft bluetooth receiver that i got with bluetooth mouse??????
I got it to wotk with the tdk software...
anyobne know any program that i can send themes,backgrounds etc...
to my phone... i tried the sowatre that follows with t68i, sendfil,pccontrol,nothing workerd:(
Posted by xiaoblur
sorri i have problems with my mitsumi bt usb adaptor..
now can send from com to hp but not from hp to pc
Posted by Zodie
How can I use my T68i as a Bluetooth headset with a TDK USB Bluetooth
adapter?
I only see a "Voice Gateway" service for my phone in the tdk Bluetooth
places application.
I installed the tdk beta driver update to my tdk drivers that are supposed
to alow this to work. I have the latest version of tdk's drivers installed
as well. 1.3.2.7. any ideas how i can get this working?
Posted by Redferne
Thanx c0mm0n for the installation tips! Worked flawlessly, however I cannot make the Voice Gateway connection to stay up for more than 5 seconds. Anybody found a way around this?
Win XP + DBT-120 + T39m
/R
Posted by [Serge]
Can't get it to work with my 3com & P800...
The software seems to be installed correctly but for one the blue light on the dongle isn't lit...
I can discover and pair the PC to the P800 but not the other way 'round... The P800 (and my Ipaq) don't discover my laptop...
Anyone know what I can do?
Thanks,
S
Posted by garethw
| Quote: |
|
Don't know if this has been mentioned anywhere in this topic but MSI have release thei own version of the Widcomm 1.3.2.7 package which includes a new firmware update file (firmware 525).
http://download.msi.com.tw/support/dvr_exe/bt49.exe (17Mb download)
| Quote: |
|
The voice gateway will only stay up if the phone is busy with a call. If there is no activity on the phone it will automatically disconnect after around 5 seconds.
After ensuring that your Windows audio settings are correct (Audio Playback and Audio Recording devices in control panel set to Bluetooth audio), make a phone call and start up the voice gateway. It should stay connected for the duration of the call. After that, any time you make or receive a call the call will automatically be transferred to your PC's sound system unless you disable the service on your PC.
[ This Message was edited by: garethw on 2003-04-01 23:37 ]
Posted by splintercell
Is it at all possible to make this driver procedure work with a Socket BT CF card, or does Socket use a chipset that is not supported by other software makers? (I really hate the Socket software for Windows
Posted by Redferne
garethw:
Double checked that Bluetooth Audio is selected for both playback and recording. Tried to make a phonecall and then "Connect Audio Gateway" to my T39. It shows the same error "The remote device closed the connection" within a few seconds.
I used the BtserverSpylite.exe to get a log during the connect/disconnect phase when I tried to setup the Audio Gateway connection. It is available here. Please someone do the same so that we can compare.
/Redferne
[ This Message was edited by: Redferne on 2003-04-02 18:59 ]
Posted by Epedemic
anyone know whats new in the 1.3.2.19 drivers now found on tdksys.com?
Posted by mk5808775
They added support for smartphones like P800 and the 7650 in 1.3.2.19!!
Posted by ZuberB
I've installed the latest software (bt49 from MSI site) for my MSI USB Dongle, but it does not seam to have upgraded my firmware from v487 to 525.
Ther is an option of the Start Menu to upgrade firmware, but there is no .dfu file included in the bt49.exe file.
I've tried reinstallation, and I actually have 2 of these, so installed the software on 2 different PCs/Dongles.
Can anyone suggest what steps I need totake to get the firmware to update ? A link to the actual dfu file perhaps.
Any help would be greatly appreciated.
Zuber
Posted by darrenjanin
Bleh! I have the Belkin adaptor, working ok, albeit with some older drivers. I tried to follow common's guide, yet failed miserably. Anyone care to help me through it, specifically for the Belkin adaptor?!
I downloaded all the files (I think) that were needed. Ran the acbtusb.exe file, but it stopped - stating:
CRC failed in Data1.cab
Unexpected end of archive
pfff. I faffed about with other bits and bobs, but just got in more of a mess. I can of course re-install the old drivers, but I would like the new ones. Anyone able to help me out? Esp. those succesful with a Belkin!
Posted by Epedemic
hmm can anyone crack the os check so i can install these on windows server 2003?
Posted by bub
I followed the steps in "PC as gsm headset" but the hbh accesoire doesn't come up on my T68i.
Could it be that the Acer dongle doesn't support audio?
[ This Message was edited by: Bub on 2003-04-29 17:11 ]
Posted by jbendaou
i didnt find any file for 3com pcmcia bluetooth card in this post...does that mean it is only for USB bluetooths?
thanks
Posted by gensei
do the widcom driver updates work with a Dlink dbt120?
Posted by julianmclean
@c0mm0n or anyone else who has got a TECOM3030 working properly!
I am currently using the BT3030 drivers from the CD (same as website) and the software just seems to crash all the time and the connection dies after about 2 mins. If I follow the instructions on the first page can I install the drivers from tecom1.rar and then the TDK software package instead of the TECOM stuff? Is this combination more stable under Win2K/XP? At the moment, the TECOM software just crashes explorer every time I try to click on "My Bluetooth Places" or "My Device" when my phone is connected. Really irritating. Plus the fact that it never says it is connected even when it does connect. WIll using tecom1.rar/tdk1.3.2.7 solve these problems?
Cheers
Posted by gkharrat
I can't find the acbtusb.exe drivers for my BT3030 in the link provided in this forum
. Could anyone please help me where to get it? This driver is supossed to let me have access to T68i dial-up via bluetooth, right? 
Posted by tyrollien
GARETHW
you just saved my life everything now just works fine with the bt49 from msi, i don't know how you find this link cause there's nothing written about it on their website.
Sending files from my t68i to my pc is now too easy !!!
Posted by termosen
hrmm
how to connect the microsoft bluetooth dongle with the t610
will the drivers here work?
i can only use dial up protocoll
Posted by neohusky
I'm having problems updating my btw software. I have the dlink dongle with the original 1.2.2.15 software. I'm currently running windows 98SE. I'm trying to update this to a more current version. I've tried updating with the biliton version as well as the recommended tdk one. I'm still having problems.
Once installed with a modified ini file the dongle is identified and the dlink driver installed. After the reboot I get an error which reads:
The BTTRAY.EXE file is linked to missing export WBTAPI.DLL. ?SetOnLocalServiceStateChaneCallback@CWBtAPI@@QAE?AW4WBtRc@@P6AXPAXPAUtB_SERVICE_INFO@@@Z0@Z
ANY HELP ON HOW BEST TO UPGRADE THIS, WOULD BE APPRECIATED!
Posted by paradoxchild
can i use the sony driver even if i dont have a bud?
my bluetooth is built into my vaio.
also,where can i get wildcomm from? i keep seeing links, but when i go, can never find it
Posted by rgoodwin
Anyone been able to make this work with the new 1.3.2.19 drivers from TDK and an Epox (or other) dongle? The .19 are supposed to be far improved and come with P800 utilities, etc. Thanks!!
Posted by njpoteri
Hi all,
I think that updated drivers might fix my problem. Unfortunately, the Billionton driver link posted earlier (http://www.billionton.com.tw/extra/download.htm) does not work. Can anyone help me out with an alternate download location?
Thx,
Nick.
Posted by gkharrat
New drivers for Widcomm (BT3030) are avaliable!
Widcomm 1.4.1.4
check this thread below
http://www.esato.com/board/viewtopic.php?topic=34176&forum=18
or download it now from
http://forum.gsmhosting.com/vbb/showthread.php?s=da8a3d7ae42573ac981fb8741839d9a8&threadid=95594
it might work with TDK and mitsumi too
Posted by KasaR
| Quote: |
|
I have the EXACT same problem as Emo. Any fixes to this?
Posted by RizSher
I'm tryign to set up voice gateway on my PC to use it as a GSM Headset. I have a Billionton Class 1 USB BT Dongle. The phone pairs fine, audio connection is formed, but, here is what happens : I Call a number from the cell phone, once connected and I can hear the other side, I click on the Vocie Gateway icon in my T610 Servies under My Bluetooth Places- the status changes to Connected. I get a blue headset icon on top of my T610 screen (same as the one I get when the phone connects to the BT kit in my car). But thats it, the sound coming from the phone stops, but no sound comes from the PC speakers.
Any way around it?. The Dongle came with 1.3.2.7 drivers.
Posted by RizSher
Anyone?..ANY ideas?..HELP!!!!
Posted by Violett
Has anyone has any success with billionton & socket CF?
Posted by ChiefWahoo
The Anycom FTP server host a new version of the Widcomm Driver 1.4.2.10... check in the MISC Folder... the license.dat file from previous 1.4.x versions seems NOT to work.
CW
[ This Message was edited by: ChiefWahoo on 2003-09-11 19:58 ]
Posted by GEOPS
I read all the pages of this thread but nothing suitable for me. Nobody's writing about a little violet-blue CSR Bluetooth device with no name on it
Any suggestions witch Software and firmware can I use to update it ....? Have connetctivity problems with my t610 ....only the file transfer goes smooth .....everything else do not. Even the pccontrol says it's connected but the accessories menu is grayed-out. Any help please ?
Posted by desloges
Hi,
I am using a BTU02 from Air2u USB (transilica) dongle between my PC and T68i and struggeling with some unstable COM. I am using the Widcomm 1.2.2.15. Any idea where I can download latest driver and software?
Thanks
Posted by mwright
I have also managed to get the PC to receive the calls from the phone (T610) but cannot hear any audio from the PC speakers.
ANyone any ideas.
TIA
Posted by miko_cool84
Hi!!! Do anyone know wich software to use with BTM1000 and Jabra BT200 ?
I use widcom's software to sync my computer and mobile...
Have tried tdk... It dont work!!!
Links:
http://www.abocom.com.tw/product_detail.php?id=142
http://www.widcomm.com
Posted by desomniac
Hi there,
Am trying to use my HBH-35 as a headset for the PC.
Using MSI Widcomm Drivers/Widcomm 1.3.2.7
Got everything paired up.
Headset connects.
However, after I answer the ringing on the HBH-35,
I do not hear anything in the headset.
I have checked my audio properties and it is set to Bluetooth Audio.
Any ideas?
Cheers.