Posted by hyperion1707
BE CAREFUL !! This is only for R8XXXXX firmware. If you have older firmware R1XXXXX, you must update !
All you need is:
DCU-60 USB cable
SimLockPatchGen 2.1; You can find it here: http://alex86ro.evonet.ro/se/Unlock/SIMLockPatchGen_v2.1.rar
Setool2lite v1.10; You can find it here: http://alex86ro.evonet.ro/se/Unlock/setool2lite110.rar
XS++; You can find it here: http://alex86ro.evonet.ro/se/XS++.rar
MAIN, FS and CDA(customization) for your phone.
STEP1: SimLockPatchGen 2.1(Creating patch)
Open SimLockpatchgen.exe and select the main firmware(I used K810_R8BA024_MAIN_GENERIC_SM_RED52.mbn). It should detect automatically the model and the firmware version. Click "Make patch" and look for a .vkp file in the "VKP" folder.
STEP2: Setool2lite
Open setool2lite.exe, choose phone type and check "Bypass DB2020 security". In the big rectangle from the right side "ADD" the MAIN(the same MAIN from STEP1) and the corresponding FS.
Lower, in the "MISC files", click on "..." and add the .vkp file generated at STEP1.
If you want to keep all that you have in the phone, flash ONLY MAIN !
Click "FLASH", connect the phone (swiched off and without SIM) holding "C" and the process begins. At a certain moment you'll be notified to unplug the USB cable and battery:
-unplug first USB cable then remove battery
-put battery back in, click "READY" and reconnect the phone holding "C"
When a dialogue about script file will pop-up(YES/NO), select "NO"!
After few minutes the process ends and you can unplug the DCU cable.
STEP3. XS++(customization)
You must unzip the CDA.zip file (in our case HB1-06_Gen_CDA102568_4_R8A_GENERIC_MEDITERR.zip) in the "files_to_upload" folder from XS++(you should have a "tpa" folder with subfolders).
1.Click "CONNECT" (with the phone turned off) and plug in the DCU cable holding "C". You should see at the left side informations about your IMEI, firmware, CID, etc.
2. Check "Customize File System"
3. In the "Configuration" rectangle in the right lower corner, choose "Settings", then check "Break XS"
4. Select "FSX", then "StartFSX"
Watch the progress bar;after 1-2min you should see:
"++ Customizing was SUCCESSFUL!
++ Disconnecting phone...
++ You may now unplug your phone.
++ FSX was successful"
This should work with any DB2020 CID52 R8XXXXX phone(K800, K810, K550, K790, W610, W850, W660, W880), but it is tested only on K800!
I only translated this tutorial. The romanian @alex86 should get the credit for it.
BTW: @simox, the author of "SimLockPatchGen 2.1" is also romanian
[ This Message was edited by: hyperion1707 on 2008-01-20 11:24 ]
[ This Message was edited by: hyperion1707 on 2008-01-20 11:29 ]
Posted by JiSm
Worked on my W610! Thanks!
Posted by strizlow800
Hehe nice one for unlocking. But for CID52 only...
Posted by gudchyld
pls i need urgent help for my SEk800i
after following ur sim unlock steps, i arrived at thye following errors
using setool2lite110
Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35975701012611 CERT:RED
FLASH CID:53 COLOR:RED
Can't build loaders chain ;(
Elapsed:10 secs.
pls friends help me out, i am from nigeria in west africa, my phones region is baltic
Posted by Boysie
Its CID53!
