Posted by Kriomag
I have modified 6.0 with 7.7 Final settings, new version number is v6.1:
http://www.rogepost.com/n/1643313319 <- v6.1 CID36
http://www.rogepost.com/n/5496980107 <- v6.1 CID36 with AE Lock
http://www.rogepost.com/n/9650094164 <- v6.1 CID49
http://www.rogepost.com/n/7851183328 <- v6.1 CID49 with AE Lock
In my opinion video recorded with v6.0 has better framerater in normal mode (~14fps) and looks much better in nightmode (but 6-7fps)
Video recorded with 6.1 (7.7 Final settings) has lower framerate in normal mode (~11fps) and in night mode colors and brightness are not as good as in v6.0 so... i made 6.2 which has 7.7 Final quality settings and video recording settings from 6.0 
hehe
http://www.rogepost.com/n/8796054875 <- v6.2 CID36
http://www.rogepost.com/n/1388691500 <- v6.2 CID49
PS. I've experimented with SPOT :/ here is 6.2 driver with spot default enabled in normal & night mode, you can disable it by enabling macro... yeah, i know, too many functions 'binded' to one button
lol
http://www.rogepost.com/n/5805839527
PPS. Here is shrinked version of v6.2 CID36 (if you have problem with uploading 38kB file with FAR):
http://www.rogepost.com/n/9383923183 <- 24kB v6.2 CID36
[ This Message was edited by: Kriomag on 2007-03-19 22:55 ]
Posted by jedi_dc
pleease sum1? teach me how to upgrade my CID 49 BROWN k750i with w800i fw .. please? at least show me a step by step guide with FAR or PHONE xs ..
Posted by dennis.l
@Kriomag
Thank for the smaller file size one. it works. for me. looks like FAR stops tranfering around 34K and hangs
Posted by omomoomomo
On 2007-03-18 11:36:30, jedi_dc wrote:
pleease sum1? teach me how to upgrade my CID 49 BROWN k750i with w800i fw .. please? at least show me a step by step guide with FAR or PHONE xs ..
Check this out and the search button is always available for those who need it:
http://www.esato.com/board/viewtopic.php?topic=125323
http://forums.se-nse.net/index.php?showtopic=6389 (Flash And Patch Your Cid49 K750/d750/w800, Tutorial for "instant" flashing and finalizing)
CID 49 Brown fone has to convert to CID 49 Red
Posted by whatsucka
On 2007-03-18 09:02:46, Kriomag wrote:
On 2007-03-18 06:12:08, whatsucka wrote:
hows the pic i took with driver 8.53??
http://www.esato.com/phonephotos/index.php?uid=109292
sorry.. its terrible picture
you used default night mode? its ISO800, wrrrr.. so many noise and no detail...
At night i use enhance night mode for super quality and if i cant hold camera for so long (few sec of exposure) i look for place to put camera on and i set self timer
and if that isnt possible i use default night mode and have iso800 crap picure hehe
ya i have to use default night mode cuz im in a car... or is gonna b way worst with enhanced night
Posted by AllanJacques
Just one help, since i am a total noob, how do i use this settings?
EV -0.7 =Sharpening (1.0 -2.6)
i know, i get the camera open and use the arrows in horizontal to set to -0.7 my EV, what then?
what do the number between parenthesis (1.0 -2.6) mean?
does it mean some other settings that can be used to enhance shapness? thanks in advance!
Posted by pakraider
On 2007-03-18 09:53:25, Kriomag wrote:
PS. In my opinion video recorded with v6.0 has better framerater in normal mode (~14fps) and looks much better in nightmode (but 6-7fps)
Video recorded with 6.1 (7.7 Final settings) has lower framerate in normal mode (~11fps) and in night mode its not as good as in v6.0 (but 7-8fps)
I just edited the hex value for the framerate in nightmode in order to make it 15 fps for night (i put in 3C, going by the method of putting 4*framerate) and it seemed to work just fine, i had nice fluid video...
Posted by Badshah
HOW to TURN OFF the SUPER mode ????
plZ help guys
Posted by whatsucka
aite i uploaded a few more new pics
http://www.esato.com/phonephotos/index.php?uid=109292
dis time i test out enhanced night in a room with no light only fone flash and compare enhanced night in a room with light and flash on off
check it out
Posted by SE4NICK
Is there any SLIM chanse this driver will work on Z550i, have been trying to get a new driver for it 4 ages, i know Z phones arean ment for photoes as much, but if u try a Z550i cam it is by far worse than VGA cams.
Any one know where i can get other driver for Z550i
Posted by Kriomag
aite i uploaded a few more new pics
http://www.esato.com/phonephotos/index.php?uid=109292
dis time i test out enhanced night in a room with no light only fone flash and compare enhanced night in a room with light and flash on off
check it out
Enhance nightmode doesnt work when (flash) led's are on, just see the iso value
Mybe in next chengrong's driver...
Posted by Badshah
can anybody tell me how to turn off super mode?
everytime i start my cam its in super mode only
pls help
Posted by dennis.l
@Badshah
which driver are you using?
Posted by dennis.l
On 2007-03-19 08:22:19, SE4NICK wrote:
Is there any SLIM chanse this driver will work on Z550i, have been trying to get a new driver for it 4 ages, i know Z phones arean ment for photoes as much, but if u try a Z550i cam it is by far worse than VGA cams.
Any one know where i can get other driver for Z550i
I don't think it will work. the Z550i only has 1.3 megapixel camera and no autofocus. This driver is for a 2megapixel camera with autofocus. the are just too different.
Posted by Badshah
i am using main 8.53 cam driver ... from the first post
Posted by dennis.l
You can't turn off the supermode on 8.53. you can only do that on 8.52(it is off by default
I suggest you try the 6.1 from Kriomag. (it is about a page up.) It is a really good driver. It will give you the closest night mode pics to the full supermode driver without being complicated to use. and a normal day and macro modes.
this driver does not have the other supermode scenes such as document/sports/portrait etc. but I don't think it is really necessary. I remember when I used supermode before. the normal and enchanced night modes were the only ones I used.
All the buttons functions work normally. except when you have night mode and macro mode both on together (with flash light off). that will give you the enchanced night mode.
Posted by Kriomag
On 2007-03-19 18:30:47, Badshah wrote:
i am using main 8.53 cam driver ... from the first post
hmm, why do you want to use superdriver if you dont want to use supermode? :/
Try my modification of 8.53 - (8.51) - profiles are available only when macro is ON
or try my modification of 4.5 - (6.0 with 4.5 quality settings or 6.1 with 7.7 Final quality settings) - no profiles, when you enter camera its normal driver (with some tweaks like smoother preview, more fps recording movies, etc), day and night mode, and when in nightmode you enable macro, enhanced night mode is ON
v6.1 - Nightmode:
v6.1 - Nightmode + Macro:
[ This Message was edited by: Kriomag on 2007-03-19 19:22 ]
Posted by Kriomag
thx dennis.l
you have explained, how my modification works, better than me (my english is terrible...)[ This Message was edited by: Kriomag on 2007-03-19 19:26 ]
Posted by kelvin9986
On 2007-03-19 20:12:34, Kriomag wrote:
On 2007-03-19 18:30:47, Badshah wrote:
i am using main 8.53 cam driver ... from the first post
hmm, why do you want to use superdriver if you dont want to use supermode? :/
Try my modification of 8.53 - (8.51) - profiles are available only when macro is ON
or try my modification of 4.5 - (6.0 with 4.5 quality settings or 6.1 with 7.7 Final quality settings) - no profiles, when you enter camera its normal driver (with some tweaks like smoother preview, more fps recording movies, etc), day and night mode, and when in nightmode you enable macro, enhanced night mode is ON
v6.1 - Nightmode:
v6.1 - Nightmode + Macro:
[ This Message was edited by: Kriomag on 2007-03-19 19:22 ]
y must on macro ?
Posted by Izlude99
I'm interested in trying Kriomag's 6.1 drivers but what does the AE-lock there mean?
Posted by Kriomag
On 2007-03-19 20:33:31, kelvin9986 wrote:
On 2007-03-19 20:12:34, Kriomag wrote:
On 2007-03-19 18:30:47, Badshah wrote:
i am using main 8.53 cam driver ... from the first post
hmm, why do you want to use superdriver if you dont want to use supermode? :/
Try my modification of 8.53 - (8.51) - profiles are available only when macro is ON
or try my modification of 4.5 - (6.0 with 4.5 quality settings or 6.1 with 7.7 Final quality settings) - no profiles, when you enter camera its normal driver (with some tweaks like smoother preview, more fps recording movies, etc), day and night mode, and when in nightmode you enable macro, enhanced night mode is ON
v6.1 - Nightmode:
[img]...[/img]
v6.1 - Nightmode + Macro:
[img]...[/img]
[ This Message was edited by: Kriomag on 2007-03-19 19:22 ]
y must on macro ?
Yes, by enabling macro you enable enhanced nightmode, there is no problem for shooting long distance objects (macro = full range scanning, from few centimeters to infinity)
And... there is no problem in shooting macros in nightmode (enhanced nightmode is automatic, it enables it self only in low light conditions
chengrong is a genius ).[ This Message was edited by: Kriomag on 2007-03-22 23:39 ]
Posted by Kriomag
On 2007-03-19 22:56:34, Izlude99 wrote:
I'm interested in trying Kriomag's 6.1 drivers but what does the AE-lock there mean?
Auto Exposure Lock... google !
second link
http://photonotes.org/cgi-bin/entry.pl?id=Autoexposurelock
Posted by Izlude99
Thanks... I don't have much experience in using drivers with enhanced night mode function because so far I'm comfortable with 7.7final but I would like to try something new.
One last thing, is there any documentation out there about using this enhanced night mode function other than the first page of this thread? I would like to learn more about it.
Posted by pakraider
It seems like no matter which driver I try, I get blurry pictures.. only macro mode looks good, everything else is not so great.. what do you guys think? I took these with 6.1 in great outside light..
bright light, sunny day with no clouds:
another shot in the same area, note the garages on the right are very blurry and lots of noise despite lots of light:
Windows tells me both of these are ISO-80 with exposure times of 1/5000 sec, if that helps? I'm just getting frustrated after stock drivers, 7.7, zuza, 9.0, and now 6.1 all giving me similar results like these.. thanks
Posted by elevation1
kriomag thanks for your driver... is not possible have 5.3 driver in daylight and nightmode 8.53 for the night... imho 5.3 are best driver in daylight (in fact are the original sony)... thanks anyway
Posted by Kriomag
On 2007-03-19 23:37:43, elevation1 wrote:
kriomag thanks for your driver... is not possible have 5.3 driver in daylight and nightmode 8.53 for the night... imho 5.3 are best driver in daylight (in fact are the original sony)... thanks anyway
Yes, it is possible:
http://www.rogepost.com/n/2061636286 <- V6.0 based on v5.3 (instead of v4.5)
The 5.3 and 4.5 are almost identical drivers
so it wasnt hard to base v6.0 on v5.3 [ This Message was edited by: Kriomag on 2007-03-19 23:14 ]
Posted by AllanJacques
On 2007-03-19 01:35:00, AllanJacques wrote:
Just one help, since i am a total noob, how do i use this settings?
EV -0.7 =Sharpening (1.0 -2.6)
i know, i get the camera open and use the arrows in horizontal to set to -0.7 my EV, what then?
what do the number between parenthesis (1.0 -2.6) mean?
does it mean some other settings that can be used to enhance shapness? thanks in advance!
sorry to be a pain an such but, what about my dumbness? please teach me?
Posted by mladen750i
On 2007-03-19 23:28:54, sarmadgilani wrote:
Windows tells me both of these are ISO-80 with exposure times of 1/5000 sec, if that helps? I'm just getting frustrated after stock drivers, 7.7, zuza, 9.0, and now 6.1 all giving me similar results like these.. thanks
Your phone is?!..
Posted by tranced
i guess his phone is a w810. as you said before that w810 can do iso-80.
Posted by pakraider
yes, its a W810i, sorry forgot to mention it
i'm almost worried there's some sort of hardware fault in my phone? i just dont get whats wrong
Posted by guguly
On 2007-03-20 04:32:09, sarmadgilani wrote:
yes, its a W810i, sorry forgot to mention it
i'm almost worried there's some sort of hardware fault in my phone? i just dont get whats wrong
Since you always get blurry pictures whatever driver you use, maybe the lens cover is dirty or scratched? or maybe your hand shakes too much? other than that, you probably have a hardware problem.
Posted by pram_zx
PS. I've experimented with SPOT :/ here is 6.2 driver with spot default enabled in normal & night mode, you can disable it by enabling macro... yeah, i know, too many functions 'binded' to one button lol
What is "SPOT" ? can you explain this?
Posted by Kriomag
On 2007-03-20 05:48:19, pram_zx wrote:
PS. I've experimented with SPOT :/ here is 6.2 driver with spot default enabled in normal & night mode, you can disable it by enabling macro... yeah, i know, too many functions 'binded' to one button lol
What is "SPOT" ? can you explain this?
i wish i could... my english is so limited
but i'll try:
its the way to measure light in picture, normally its done by avarage of entire image, with spot its done only by central part of image (square where you're focusing).
Example:
Without SPOT:
- Phone is way to dark because brightness is measured by avarage of entire picture.
With SPOT:
- Phone is visible because light is measured only by center of the picture (where phone is), the light from window is ignored
EDIT: Ofc same effect u can achieve, without spot, just by setting EV +1 or higher
[ This Message was edited by: Kriomag on 2007-03-20 16:37 ]
Posted by Badshah
^^^ that was a very good explaination abt SPOT
Posted by salambaba
hi
I'm using the 8.8 base on 7.7Editet , it's give the best pics on my k750i with
w800 f/w .
It's take the best photo and more sharp .
BUT the colors in compare of 8.53 not live .
and enhance night mode in 8.8 have not good and live colors in compare
with 8.53 .
Can any1 put the colors of 8.53 in 8.8 .
thanks .
_________________
[CENTER]
[/CENTER]
[CENTER]K750i User[/CENTER]
[ This Message was edited by: salambaba on 2007-03-20 17:24 ]
Posted by pakraider
On 2007-03-20 05:38:22, guguly wrote:
Since you always get blurry pictures whatever driver you use, maybe the lens cover is dirty or scratched? or maybe your hand shakes too much? other than that, you probably have a hardware problem.
ouch..
the lens seems to be just fine, but is there a proper way in cleaning it.. can i just take a lint-free cloth and gently wipe it in case there's any smudges or something? i guess my warranty is long gone after debranding and flashing so i hope its not a hardware fault
Posted by norbi_nw
So wich driver is the "best"-"final" now (since there are a lot of v6.x drivers) ?
Posted by dennis.l
@Kriomag
thanks for the 6.1 driver. it is really good and the one I use as my main driver.
the only grip I have is with all the 7.7 based drivers the WB is off with LED light enabled. I think the maker of the original 7.7f must be testing it with the MXE-60 only. anyway, I think the colour is too blue when you use normal night mode with LED light.
Also what is the possibility of making the Zuza based 6.1? I love the speed of that driver and the file size.
Posted by Kriomag
On 2007-03-20 22:15:13, norbi_nw wrote:
So wich driver is the "best"-"final" now (since there are a lot of v6.x drivers) ?
v6.0 is based on original 4.5/5.3 + enhanced nightmode
v6.1 is based on 7.7 final + enhanced nightmode
v6.2 is based on 7.7 final + enhanced nightmode and video settins from v6.0 v6.0
Im using v6.2
Posted by Kriomag
On 2007-03-20 23:02:53, dennis.l wrote:
@Kriomag
thanks for the 6.1 driver. it is really good and the one I use as my main driver.
the only grip I have is with all the 7.7 based drivers the WB is off with LED light enabled. I think the maker of the original 7.7f must be testing it with the MXE-60 only. anyway, I think the colour is too blue when you use normal night mode with LED light.
Also what is the possibility of making the Zuza based 6.1? I love the speed of that driver and the file size.
I'm interested
just give me the link for zuza and i'll try to mix them when i have some free time
PS. Modifing drivers take lot of time... i have spent all free time of last few days modifing drivers
its an addiction or something i want be free now but there is so many different settings to check... lol
Posted by guguly
@Kriomag
How about modifying Chengrong's 8.53 the same way to make it simpler and easier to use?
Posted by Kriomag
On 2007-03-20 23:33:28, guguly wrote:
@Kriomag
How about modifying Chengrong's 8.53 the same way to make it simpler and easier to use?
u mean something like 6.0 (enhance nightmode only when macro ON) but all quality settings from 8.53? it can be done
in fact very easily just give me few minutes
and here it is:
http://www.rogepost.com/n/7615224149 <- Castrated v8.53
(removed profiles, enhanced nightmode only in nightmode + macro ON)
[ This Message was edited by: Kriomag on 2007-03-20 23:22 ]
Posted by audii786
alright, can some1 really explain the steps by step quide to me!
i aint smart like you all yeah,
so come on.. be nice help me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :'(
Posted by dennis.l
On 2007-03-20 23:09:53, Kriomag wrote:
On 2007-03-20 23:02:53, dennis.l wrote:
@Kriomag
thanks for the 6.1 driver. it is really good and the one I use as my main driver.
the only grip I have is with all the 7.7 based drivers the WB is off with LED light enabled. I think the maker of the original 7.7f must be testing it with the MXE-60 only. anyway, I think the colour is too blue when you use normal night mode with LED light.
Also what is the possibility of making the Zuza based 6.1? I love the speed of that driver and the file size.
I'm interested
just give me the link for zuza and i'll try to mix them when i have some free time
PS. Modifing drivers take lot of time... i have spent all free time of last few days modifing drivers
its an addiction or something i want be free now but there is so many different settings to check... lol
you can find the zuza drivers at the bottom of this page.
http://clubw800i.googlepages.com/home33
but if it is too much trouble I will be really greateful if you can adjust the White Balance a little.
at the moment, LED with Night mode = too blue but LED with Enchance night is perfect
Posted by irontech
Noob question...
Can I use this SuperCam driver 8.53 on my W900i?
Posted by chengrong
On 2007-03-21 04:20:21, irontech wrote:
Noob question...
Can I use this SuperCam driver 8.53 on my W900i?
Super camera driver 8.53 can't work on W900 , But I can give you this to try.
http://s21.quicksharing.com/v[....]nhancenight_camdriver.zip.html
_________________
[ This Message was edited by: chengrong on 2007-03-21 04:55 ]
Posted by pram_zx
@kriomag
Hi.., I use your driver v6.2 based v7.7 Final.I like it.but I miss the night mode from v8.53,can you add this nightmode?(on chengrong camdriver scene 1.4, on mladen750 camdriver scene 1.5) + AE Lock with SPOT.
It would be the powerfull camdriver (at least for me...hehehe...)
Posted by stingjoel
@Chengrong;
When will your super camdriver v8.54 released? I'm sure your camdriver will surprise us again...like your enhanced nightmode and nightscene
Posted by pram_zx
@all camdriver MASTER
can you make the focus to be manual focus, just like real camdig? just wonder....hihihi
maybe chengrong v8.54 will have it
Posted by chengrong
The super camera driver will released 8.54.
This is upgrade version from v8.53.
Unlike previous versions upgrade bring exciting (8.51 to v8.52, v8.52 and v8.53),Relatively small changes in this version, Nevertheless, it is still adding some new features:
Speedup for EnhanceNight mode.
Speedup for daylight;
Add Spot support: picture fine mode for spot on ,normal mode for spot off.
JPEG levle is changed to 87 include fine & normal mode;
Add manual focus: macro on and night on, press zoom(+/-) key for focusing;
(1.0 Auto focus,1.1 focus to infinity, focus range 1.2-4.0)
Note:The manual focus is be remained when you turn off camera.
LED support: EnhancNight mode is supported LED now.
Some bugs fixed:
Bug01 : when switched to the video recorder from the 1.8 scene mode thecamera system restart.
bug02 : White Balance missed.
bug03 : After take a picture, the viewfinder is very dark. it is happend onmacro on.
bug04 : The normal mode sometimes over exposed.
bug05 : Brust snap sometimes exit.
Others is same as v8.53.