| Author |
Upgrading V800 to Z800 using Davinci client |
turbopower67
Joined: Jul 25, 2004
Posts: 10
PM |
Has someone already successfully upgraded a V800 to Z800 using the Davinci tool ?
If yes, which version of the client did you use ?
What firmware files did you use (found on http://www.davinci-server.com/sonyericsson_files/) ?
Z800_FS_EU1_R1X019.BIN and Z800_Main_EU1_R1X019.BIN ?
What was the CID of the V800 you upgraded to Z800: CID29 ?
Thanks ! |
|
|
gbrooks3
Joined: Jun 02, 2003
Posts: > 500
From: OTP RED CID36
PM, WWW
|
Well, the two remaining "big" servers Davinici and TMS can flash those files yes. You phone will no doubt be CID29 Red but if files are there then you should be able to flash them.
Because the platform sends bogus messages while charging, that is why!!!..But why this change of heart?..We sense a charger connected, oops, we will not shut down after all!!!..*********************** UI BASIC, HOLD YOUR HORSES
|
jamers
Joined: Feb 04, 2005
Posts: 16
PM |
davinci upgrades the firmware v800 to z800?
have anione of u guys tried it? coz setool2 doesn't have the files after rx011. i have rx011 now on my phone but its buggy. davinci have rx011 and above? |
Altezza_lex
Joined: Dec 25, 2003
Posts: 107
From: USA
PM |
I used TMS and upgraded to R1X019 setool2 is a big letdown  . |
turbopower67
Joined: Jul 25, 2004
Posts: 10
PM |
Davinci has R1X019, but these are CID36 files... So I can't/don't know how to upgrade my V800 that is CID29.
Has someone been successful in this operation using Davinci client ?
Thanks! |
jamers
Joined: Feb 04, 2005
Posts: 16
PM |
ok guys i nee to noe somethings.
i'm using a v802se, which i flashed and unlocked from setool2. now im using r1x011 firmware from setool2.
can i use TMS to reflash my phone to a later firmware like r1x019 or later?
i have the t28 cable and im jus wan to make sure if v802se is totally works fine with TMS firmware upgrade |
gbrooks3
Joined: Jun 02, 2003
Posts: > 500
From: OTP RED CID36
PM, WWW
|
Sure - many people have already done this, and it works now SEMC release files that server can flash......
Because the platform sends bogus messages while charging, that is why!!!..But why this change of heart?..We sense a charger connected, oops, we will not shut down after all!!!..*********************** UI BASIC, HOLD YOUR HORSES
|
gcchui
Joined: Mar 17, 2005
Posts: 3
PM |
what is TMS and davinci?
I only know how to use setools, but i wanna flash my v800 wif the lastest z800 firmware (which setools doesn not provide).
can someone kindly write a dummy guide? |
gbrooks3
Joined: Jun 02, 2003
Posts: > 500
From: OTP RED CID36
PM, WWW
|
www.davinciteam.com
www.totalmultiserver.com
Because the platform sends bogus messages while charging, that is why!!!..But why this change of heart?..We sense a charger connected, oops, we will not shut down after all!!!..*********************** UI BASIC, HOLD YOUR HORSES
|
jamers
Joined: Feb 04, 2005
Posts: 16
PM |
so wat is TMS latest firmware version? and will it continue to provide more of the latest firmware for z800? setool is 026? does tms have tt? |
gbrooks3
Joined: Jun 02, 2003
Posts: > 500
From: OTP RED CID36
PM, WWW
|
Setool dont sell credits anymore - so unless you want to pay $199 i would take them out of the equation. 
Because the platform sends bogus messages while charging, that is why!!!..But why this change of heart?..We sense a charger connected, oops, we will not shut down after all!!!..*********************** UI BASIC, HOLD YOUR HORSES
|
jamers
Joined: Feb 04, 2005
Posts: 16
PM |
i'm still confused with TMS system.
how many credits do i have to get to flash my v802se wif r1x011 to a z800i firmware which can play mp3 and mp4 files? |
|
|
Posted: 2005-03-28 13:28
