| Author |
K800i - Configuration Error . HELP PLS ! ( |
glemin
Joined: Feb 20, 2011
Posts: 3
PM |
Hi guys,
Ive been getting this message on my phone: "Configuration error, please contact your service carrier", i cant do anything, while the message is there, cant also cancel it. I found a web site where a guy said that i should flash my phone. The problem is that i installed a CDA (also updated my firmware to latest i could get on ericsson updater). When i start and connect to XS++, i am offered to upgrade my CID to 52 down from 49. When i press ok i get an error :
13:30:06| +++ Sending CERTIFICATE LOADER...
13:30:06|
13:30:06| Sending db2020_cid01_cert_p3g.bin...
13:30:06| Applet ID: 060712 1258 ALU4_CXC1329130_DB2020_SEMC_CERTLOADER_P3G
13:30:06| This is a CERTIFICATE loader
13:30:06|
13:30:06| Sending db2020_red49_cs_r3a009.bin...
13:30:06| Header: Error 0x10
13:30:06| Error: Failed to send CSLoader
I also looked up the region.. i got this phone from my company so it says : T_MOB_INT_B
and the colour is: Brown (maybe thats the problem ? i read somewhere that brown couldnt be flashed but it was a long time ago.)
anyways here are my specs :
Baseband ID: 9900
13:30:03| Protocol Version: 3.1
13:30:03| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:K800)
13:30:03| ...using GDFS name
13:30:03|
13:30:03| Profiling SEMC phone...
13:30:03| Platform: DB2020
13:30:03| OTP CID: 36
13:30:03| EROM CID: 49
13:30:03| EROM Color: Brown
13:30:03| IMEI: 00460101xxxxxx
13:30:03| Phone ID: K800
13:30:03| Region: T_MOB_INT_B
13:30:03| CDA: CDA102511/82 R7A
13:30:03| Firmware Version: R1CB001
13:30:03| EROM: R3A009
13:30:03| Ready for operation!
Any help welcome pls... btw im kinda noob at this so patience please 
Thanks | |
|
centur
Joined: Jun 10, 2007
Posts: > 500
From: Bulgaria
PM, WWW
|
Change color from BROWN to RED and flash with XS or Setool.
|
glemin
Joined: Feb 20, 2011
Posts: 3
PM |
Hi, thanks for the answer, but eh how do i change the colour ?  (sry im noob) do i change it in XS++ somewhere? |
centur
Joined: Jun 10, 2007
Posts: > 500
From: Bulgaria
PM, WWW
|
On 2011-02-20 14:18:57, glemin wrote:
Hi, thanks for the answer, but eh how do i change the colour ? (sry im noob) do i change it in XS++ somewhere?
Use Omnius change CID color from BROWN to RED -it's free.
|
glemin
Joined: Feb 20, 2011
Posts: 3
PM |
I started using the Omnius thing, but i got one problem :
When im trying to switch the colour it recognises the phone (after instructions ((like switch off the phone and hold 2 and 5 to connect)), and then it says "Restarting the phone.." and the phone doesnt restart and it seems like the software is waiting for me to do something, but when i either restart the phone, or just unplug it and connect again, it does the steps like "writing flash" and then it says "successfully done", but when i check the info about the phone its still brown (sry for making it complicated). Basically: I get stucked on one step (the one that says restarting phone and the instructions pop up) and whatever i do with the phone or the cable, the colour doesnt apparently change but the program says its successful
*Important EDIT*: Thanks for the help m8 ! i just tried to flash it through omnius having a brown colour and it worked !! yay... thanks very much and sorry for the trouble
[ This Message was edited by: glemin on 2011-02-20 17:17 ] | |
|
Access the forum with a mobile phone via esato.mobi
|
Posted: 2011-02-20 13:34
