| Author |
K800i flash |
kuniving1
Joined: Jan 05, 2011
Posts: 5
PM |
hi, need some advice from the more advanced (then me) folk with my issue. I got my brothers k800i which had a solid white screen of death and tried flashing it. Unfortunately I didnt understand the process properly and never finalized so after MB + FS flash I turned it on and still white screen. Also I SEUS updated like a hundred times but then next time it would say update is available so that didnt work.
Im using the JDflasher tutorial which Ive found to be the best (conveniently with the best program) here http://www.esato.com/board/viewtopic.php?topic=170737
Basically I cant continue after step 11 double click ofs because JDflasher says starting fs loader but nothing happens.
This is a log of me trying to repair, recovery write gdfs with setool2lite
Elapsed:12 secs.
Elapsed:12 secs.
file can't be found or opened
Elapsed:0 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:2 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35xxxxxxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
ldr_on_ldr hdr no ack (10)
CSloader uploading failed,exiting
Elapsed:23 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35xxxxxxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
only FLASH operation supported in that mode
Elapsed:13 secs.
RECOVERY MODE STARTED
skipping empty loader...
All possible recovery loaders fail. That phone not supported
Elapsed:13 secs.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35xxxxxxxxxxxx CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:13 secs.
RECOVERY MODE STARTED
skipping empty loader...
All possible recovery loaders fail. That phone not supported
Elapsed:9 secs.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35xxxxxxxxxxxx CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:15 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35xxxxxxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED
set_gdfs_props failed, exiting
Elapsed:7 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35xxxxxxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
Abort all operations.
wrong response, break.
loader fs startup failed, that is fatal
Elapsed:58 secs.
I have wotan credit if it will help or I can trade with someone because wotan doesnt work it says ACK get fail |
|
|
tranced
Joined: Jan 19, 2006
Posts: > 500
From: Santo Domingo, wonDeRland
PM |
Your phone is CID52. Why don't you use xs++ 3.1 or setool 2 lite 1.11?
|
kuniving1
Joined: Jan 05, 2011
Posts: 5
PM |
I did I get and got this
03:28:05| Executed on Microsoft Windows XP
03:28:18|
03:28:18| Attempting to open the interface...
03:28:18|
03:28:18| TURN OFF PHONE!
03:28:18| Hold 'C' button on phone and connect phone NOW.
03:28:18| You have 30 seconds...
03:28:18|
03:28:18| Baseband ID: 9900
03:28:18| Protocol Version: 3.1
03:28:18| Phone name detected!
03:28:18|
03:28:18| Profiling SEMC phone...
03:28:18| Platform: DB2020
03:28:18| OTP CID: 49
03:28:18| EROM CID: 52
03:28:18| EROM Color: Red
03:28:18| IMEI: 35399601xxxxxx
03:28:18| Phone ID: K800
03:28:18| Region: T_MOB_INT_A
03:28:18| CDA: CDA102511/12 R12A
03:28:18| Firmware Version: R1CF001
03:28:18| EROM: R3A011
03:28:18| Ready for operation!
03:28:28|
03:28:28| Sending db2020_cid01_prodid_p3j.bin...
03:28:28| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
03:28:28| This is a PRODUCTION_ID loader
03:28:28|
03:28:28| Sending db2020_mem_patcher_cid52_r2a006.bin...
03:28:29| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
03:28:29| This is a MEM_PATCHER loader
03:28:29|
03:28:29| Sending db2020_cid52red_flash_r2a005.bin...
03:28:29| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
03:28:29| This is a FLASH loader
03:28:29| Now flashing firmware main...
03:28:29| Flashing g:\\documents and settings\\xxx\\my documents\\gdfs_35399601xxxxxx.bin
03:28:29| Header type: Unknown/damaged
03:28:29| 292 flashblocks
03:28:29| Binary acknowledge failed with: 89
03:28:29| Failed
03:28:29| Binary acknowledge failed with: 68
03:28:29| Command: Error 0x68
03:28:29| Failed sending flashblock 1. Returnvalue 0xD0022D00
03:28:29| Finishing flash
03:28:30| Binary acknowledge failed with: 02
03:28:30| Failed
03:28:30| Failed
03:28:41| Error: Flashing failed
03:28:41| Disconnected... Unplug the phone
Which Erom should I try and use? does it go into the main bar in XS++ |
kuniving1
Joined: Jan 05, 2011
Posts: 5
PM |
15:33:26| Sending db2020_red52_cs_r3a009.bin...
15:33:28| Applet ID: 070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
15:33:28| This is a CHIPSELECT loader
15:33:28| Activating loader...
15:33:28| Activating GDFS...
15:33:42| This loader is UNLOCKED
15:33:42| Success! CS-loader has been unlocked!
15:33:42| Uploading customization files to phone...
15:33:43| Uploading /tpa/preset/custom/CONTENT_DOWNLOAD_HOOK.itm...
15:33:43| Activating filesystem
main flashed now the phone turns on with white screen and the when i press the power switch phone vibrates, thanks for the tip tranced as im back to square 1  (better then dead phone imo). what should i do with my above problem? |
tranced
Joined: Jan 19, 2006
Posts: > 500
From: Santo Domingo, wonDeRland
PM |
And how did it get the white screen of dead? All of a sudden?
|
kuniving1
Joined: Jan 05, 2011
Posts: 5
PM |
yeah all of sudden seems common from what ive read like i said brother gave it to me with a wsod he said "it just happend one day" so ive been messing around until I had a dead phone no white screen no indication of resurrection, but after trying so many things;
I used xs++ to flash the main and that made the dead phone turn on just white solid, then I used wotan says "ACK get fail" but it flashed main and fs succesfully now the phone turns on and says please wait because wotan didnt finish finilization. I think wotan not worth the price cause theres a massive lack of support.
Im gonna wait for advice now, how can i check if tpa files are installed???? this is good forum btw fast response.  
|
kuniving1
Joined: Jan 05, 2011
Posts: 5
PM |
Guys it worked even though I cant explain how it works, I think I had to use the correct main+fbn what I cant explain is how the custom pack was installed when wotan said it failed but I just checked my wotan credit and its gone maybe not such a bad product cause it worked. Big thanks to Tranced who got me back on track YOU THE MAN!! |
aldrinus
Joined: Jan 16, 2005
Posts: > 500
From: Philippines
PM |
glad to know your  is now working somehow.
one could almost always count on tranced on matters like this...
he is the man!
|
|
|
Posted: 2011-01-06 13:29
jay0726 | 
