| Author |
Hazel j20i WiFi problem! |
DogDaBig
Joined: Sep 21, 2010
Posts: 1
PM |
Hi to all of u!
I have this SE Hazel phone and with it the problem that I can acces most routers with WiFi, but I cant use the internet. Only 1 of 10 routers works realy with this phone. I've did the repair and software update allready, but nothing helps.
Can you help me? Thanks to all ya! |
|
|
zagi988
Joined: Sep 20, 2009
Posts: 39
From: Croatia
PM |
On 2010-09-22 00:08:55, DogDaBig wrote:
Hi to all of u!
I have this SE Hazel phone and with it the problem that I can acces most routers with WiFi, but I cant use the internet. Only 1 of 10 routers works realy with this phone. I've did the repair and software update allready, but nothing helps.
Can you help me? Thanks to all ya!
I have the same problem, but I have waranty so I'm gonna take it to service center...
|
conor
Joined: Jul 18, 2008
Posts: 14
From: Belfast , N.Ireland
PM |
Im having a similar problem with my elm j10i2, but only when I try to connect to bt openzone or bt fon. Do I have to change any of the advanced settings to fix this |
StevenC
Joined: Aug 23, 2008
Posts: > 500
From: NY
PM |
It is neither a problem on your phone or the router, but the configuration on either of them.
Note: SE A200 and A300 phones do not support WPA2. If this is the source of the problem, then you have to enable WPA on the router.
-Configuring Wifi on the phone
First thing is to allow your phone configure automatically by the router's DHCP. In your phone, go to WiFi > Advanced > Manual setup. Enter the SSID (router broadcast name) and WPA key. Leave the IP and other settings blank. This should allow DHCP do the rest and internet should work on your phone with this.
If it does not, then you have to set the IP address, Gateway, Subnet mask, DNS all manually.
IP address - eg 192.168.2.10
Gateway and DNS - usually same as the router IP address eg. 192.168.2.1
Subnet mask - often 255.255.255.0
Refer to your router's manual for the correct settings |
|
|
Posted: 2010-09-22 00:08
